Contact links

Each Xe atom of each XeFs group makes one short contact with one PdFj group [i.e., Xe(2)-F(3), Xe(l)-F(4)] and two somewhat longer contacts to a second PdF group. These Xe- -F contacts link XeF, and PdF groups into rings ... 

See contact links (www.chem.wisc.edu/ nbo5/ess.htm) in Ref. 3c for NBO-affiliated electronic structure packages. 

The major use of vinylpyrrohdinone is as a monomer in manufacture of poly(vinylpyrrohdinone) (PVP) homopolymer and in various copolymers, where it frequendy imparts hydrophilic properties. When PVP was first produced, its principal use was as a blood plasma substitute and extender, a use no longer sanctioned. These polymers are used in pharmaceutical and cosmetic appHcations, soft contact lenses, and viscosity index improvers. The monomer serves as a component in radiation-cured polymer compositions, serving as a reactive diluent that reduces viscosity and increases cross-linking rates (see... 

Neoprene—phenohc contact adhesives, known for thein high green strength and peel values, contain a resole-type resin prepared from 4-/-butylphenol. The alkyl group increases compatibiHty and reduces cross-linking. This resin reacts or complexes with the metal oxide, eg, MgO, contained in the formulation, and increases the cohesive strength of the adhesive. In fact, the reactivity with MgO is frequently measured to determine the effectiveness of heat-reactive phenoHcs in the formulation. 

Tire Cord. Melamine resins are also used to improve the adhesion of mbber to reinforcing cord in tires. Textile cord is normally coated with a latex dip solution composed of a vinylpyridine—styrene—butadiene latex mbber containing resorcinol—formaldehyde resin.. The dip coat is cured prior to use. The dip coat improves the adhesion of the textile cord to mbber. Further improvement in adhesion is provided by adding resorcinol and hexa(methoxymethyl) melamine [3089-11 -0] (HMMM) to the mbber compound which is in contact with the textile cord. The HMMM resin and resorcinol cross-link during mbber vulcanization and cure to form an interpenetrating polymer within the mbber matrix which strengthens or reinforces the mbber and increases adhesion to the textile cord. Brass-coated steel cord is also widely used in tires for reinforcement. Steel belts and bead wire are common apphcations. Again, HMMM resins and resorcinol [108-46-3] are used in the mbber compound which is in contact with the steel cord to reinforce the mbber and increase the adhesion of the mbber to the steel cord. This use of melamine resins is described in the patent Hterature (49). 

Diamine curatives were the first cross-linking agents for fluorocarbon mbbers. They are corrosive to mild steel molds and have been replaced in many appHcations by the bisphenol or other more recent cure systems. Nevertheless, some diamines are stiU used for food-contact appHcations of fluorocarbon mbbers and in zinc-free cures of halobutyl mbbers for pharmaceutical stoppers. Methylene dianiline and triethylene tetramine are cross-linking agents for ethylene—acryflc elastomers. 

Cross-linked versions of water-soluble polymers swollen in aqueous media are broadly referred to as hydrogels (52) and have a growing commercial utility in such apphcations as oxygen-permeable soft contact lenses (qv) (53) (Table 4) and controUed-release pharmaceutical dmg deflvery devices (54). Cross-linked PVP and selected copolymers fit this definition and are of interest because of the following stmcture/performance characteristics ... 

Carbon Electrodes. Carbon electrodes are rigid carbonaceous shapes deployed in electric furnaces. They are the final link in the chain of conductors from the energy source to the reaction zone of an electrically heated vessel. The gap bridged by the electrode is that between the contact plates that transmit current to the electrode and the discharge area at the arc end of the electrode. 

Specifications and Standards Test Methods. Hydroxyethylcellulose is included in the Hst of materials that are in compHance with requirements of the U.S. EDA for use in adhesives and in resinous and polymeric coatings employed on the food-contact surfaces of metal, paper, or paperboard articles, and other substrates intended for use in food packaging as specified in CER 21. HEC made dispersible by cross-linking with glyoxal is cleared only as an adhesive and as a component of paper and paperboard in contact with food. It has not been cleared as a direct food additive. 

---