Composite systems, thermal properties

Thermal stability is always a system-dependent property. It is a function not only of the chemical composition of the medium but also of the processing conditions, degree of dispersion, and pigment concentration. For most practical purposes, for instance, the color change due to pigment decomposition in a highly pigmented system is hardly noticeable and can thus be tolerated. 

Using Differential Scanning Calorimetric and Roentgen-phase analyses methods it has been established that synthesized polymers are amorphous systems. Thermal (phase) transformation temperatures of synthesized polymers have been determined. Thermooxidation stability of the synthesized polymers has been studied. There was shown that their thermooxidation stability exceeded the analogical characteristic of polyorganocarbo-siloxanes. Using synthesized diallylsilazanes modification of the properties of some important industrial polymer composites based on phenolformaldehide resins has been carried out. Preliminary investigations showed that synthesized polymers in combination... 

A candidate interlayer consisting of dual coatings of Cu and Nb has been identified successfully for the SiC-Ti3Al-I-Nb composite system. The predicted residual thermal stresses resulting from a stress free temperature to room temperature (with AT = —774°C) for the composites with and without the interlayers are illustrated in Fig. 7.23. The thermo-mechanical properties of the composite constituents used for the calculation are given in Table 7.5. A number of observations can be made about the benefits gained due to the presence of the interlayer. Reductions in both the radial, and circumferential, o-p, stress components within the fiber and matrix are significant, whereas a moderate increase in the axial stress component, chemical compatibility of Cu with the fiber and matrix materials has been closely examined by Misra (1991). 

A variety of surface-sensitive spectroscopic and microscopic methods were critical in the investigation of these systems. In the work by Advincula et al, the composition, thickness, physical and thermal properties, and morphology of the tethered polymer brushes were carefully analyzed [72]. A variety of surface-sensitive techniques such as ellipsometry, contact angle measurements, AFM, quartz crystal microbalance (QCM), FT-IR grazing incidence... 

An additional thermal property of interest is thermal diffusivity. The dental pulp sensory system is extremely sensitive to changes in temperature. These sensory inputs are interpreted only as pain. Metallic restorations of deep carious lesions of the tooth frequently need to have a low thermal conductor placed beneath them to avoid causing pulpal pain. The thermal diffusivity of composite varies from approximately that of tooth structure (0.183 mm2/s) to twice that value [204, 254], Metallic restorations of concern have diffusivities at least an... 

The model PBZT/ABPBI molecular composite system is limited since the rod and the matrix do not possess glass transition temperatures for subsequent post form consolidation. In an effort to improve the processability for molecular composites, thermoplastics were used as the host matrix. Processing from acidic solvents requires the thermoplastic host to be soluble and stable in meth-anesulfonic add. Thermoplastic matrices were investigated including both amorphous and semicrystalline nylons [71,72], polyphenylquinoxaline (PPQ) [73] and polyetheretherketone (PEEK) [74], Table 5 shows the mechanical properties obtained for various processed PBZT thermoplastic molecular composite systems. As an example, the PBZT/Nylon systems showed 50-300% improvement over uniaxially aligned chopped fiber composite of comparable compositions. However, the thermally-induced phase separation during consol-... 

In addition, Seferis and Wedgewood have pointed out the many pitfalls that should be avoided when using dynamic mechanical analysis (DMA) to determine thermal properties in epoxy systems [134]. However, Sanz, et al. have investigated Tg of epoxy systems via DMA for a myriad of epoxy compositions and compiled large amounts of reasonable data using this technique [ 135]. Zukas has done the same using torsional braid analysis (TBA) on many epoxy systems and produced similar conclusions to Sanz [129]. 

Other examples of transport properties include electrical and thermal conductivity. Transport of a physical quantity along a determined direction due to a gradient is an irreversible process by which a system transitions from a nonequilibrium state to an equilibrium state (e.g., compositional or thermal homogeneity). Therefore, it is outside the realm of equilibrium thermodynamics. (For this reason, equilibrium thermodynamics is more appropriately termed thermostatics.) Transport processes must be studied by irreversible thermodynamics. 

Three-dimensional analyses of heat transfer and cure in pultrusion of epoxy-resin composites have been examined by Chachad et al. (1995, 1996) and Liu et al. (2000). Carlone et al. (2006) review finite-difference and finite-element process models used for predicting heat transfer and cure in pultrusion. In this work they recommend the following empirical nth-order cure model for predicting cure kinetics of epoxy-resin composites, which is then coupled to the system s energy balance to predict thermal properties and cure conversion ... 

---