Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Composite materials preparation

Rajeshwar, K., de Tacconi, N.R., and Chenthamarakshan, C.R. (2001) Semiconductor-based composite materials preparation, properties, and performance. Chemistry of Materials,... [Pg.126]

Ogomi, D., Serizawa, T. and Akashi, M. (2003) Bioinspired organic-inorganic composite materials prepared by an alternate soaking process as a tissue reconstitution matrix. Journal of Biomedical Materials Research, 67A, 1360-1366. [Pg.208]

In general, in the field of materials or condensed matter, the preparation of polymer brushes on solid surfaces is of great interest for surface modification and composite material preparation [4-6]. A number of model surface grafting techniques have been used on planar surfaces and particles and have been the subject of previous reviews. While a munber of polymer brush preparation methods have been reported using physisorption or chemisorption or so-called grafting onto methods, the emphasis of this review is on surface-initiated polymerization (SIP) methods or grafting from methods. [Pg.110]

Fig. 2. XRD patterns of as-synthesized micro-mesoporous composite materials prepared with increasing the time of microwave irradiation (a) sample 1, (b) sample II, (b ) calcined (b), (c) sample III, (c1) calcined (c), and (d) sample IV. See Table 1 for the notations of I, II, III and IV. Fig. 2. XRD patterns of as-synthesized micro-mesoporous composite materials prepared with increasing the time of microwave irradiation (a) sample 1, (b) sample II, (b ) calcined (b), (c) sample III, (c1) calcined (c), and (d) sample IV. See Table 1 for the notations of I, II, III and IV.
Properties of micro-mesoporous composite materials prepared by microwave irradiation... [Pg.111]

Figure 1. Powder XRD diagrams of mesostructured alumi nophosphate / surfactant composite materials prepared in (a) water (120°C), (b) ethanol (90°C), (c) methanol (25°C), (d) ethanol (10°C). Lamellar and hexagonal phases are indexed "4" corresponds to a phase with presumably lamellar structure. Figure 1. Powder XRD diagrams of mesostructured alumi nophosphate / surfactant composite materials prepared in (a) water (120°C), (b) ethanol (90°C), (c) methanol (25°C), (d) ethanol (10°C). Lamellar and hexagonal phases are indexed "4" corresponds to a phase with presumably lamellar structure.
U.S. Pat. No. 6,291,558 [26] discloses a composite material prepared by spraying a urea-formaldehyde resin mixed with a thermosetting lignosulfonate-based resin material to wood particles, to assist in the adhesion of the wood particles. [Pg.80]

L.B. Kong, J. Zhang, JJ. An, Y.C. Luo, and L. Kang, MWNTs/PANI composite materials prepared by in-situ chemical oxidative polymerization for supercapacitor electrode, J. Mater. ScL, 43, 3664-3669 (2008). [Pg.255]

Single crystal cBN is not of industrial importance for cutting applications as it offers few benefits over monocrystalline diamond and is intrinsically more difficult to synthesize. As such, all industrial cBN tools are composite materials prepared using powder metallurgical techniques, but sintered under similar conditions to those used for the synthesis of diamond and cBN from their softer allotropes (graphite in the case of diamond). [Pg.1187]

Kesenci, K., Motta, A., Fambri, L. and MigUaresi, C. (2001) Poly(E-caprolactone-co-D,L-lactide)/sitk fibroin composite materials Preparation and characterization. Journal of Biomaterials Science, Polymer Edition, 12, 337-351. [Pg.237]

Additional specimens were prepared by melting and kneading sodium-type montmorillonite (unorganized type) and nylon 6 using a twin screw extruder at 250 °C for the purpose of comparing them with the specimens prepared as described above. This method of preparing specimens is commonly used when compounding particulate fillers with polymers. The composite material prepared in this way was called NCC (Nylon 6-Clay Composite), and the NCC was compared with the NCH. [Pg.142]

Simancik F, Jangg G, Degischer HP, Short carbon fiber-aluminum matrix composite material prepared by extrusion of powder mixtures. Journal de Physique, IV 3,(C7), Part 3, 1775-1780, 1993. [Pg.652]

From Table 4.2 we can see that the strengths of composite materials prepared with different feeding positions are quite different, especially the impact strength, which has an... [Pg.165]

Performance Analysis of the Composite Materials Prepared Using Extrusion and Injection Molding... [Pg.279]

Figure 6.39 Tensile stress-strain curves of composite materials prepared using extrusion and injection molding, (a) Pure PP. (b) 10% whisker content. Figure 6.39 Tensile stress-strain curves of composite materials prepared using extrusion and injection molding, (a) Pure PP. (b) 10% whisker content.
In a parallel study, a biocompatible composite made of sulphonated PSU and HAp was prepared and characterized. The incorporation of HAp was achieved by spontaneous precipitation of HAp at controlled conditions of pH and temperature. The time of the precipitation process was used to regulate the content of inorganic component in the composite. The composite material prepared in this experiment contained 9 wt% of HAp and 91 wt% of polymer. Analysis of the kinetic results of the crystallization process showed that the growth of HAp on the film-shaped composite material followed a polynuclear (nuclei above nuclei) crystal growth mechanism [103],... [Pg.126]

Krishnan R., Nouia R. de Tacconi, Chenthamarakshan C. R. (2001) Semiconductor-Based Composite Materials Preparation, Propaties, and Perfouiance. Chem. Mater. 13 2765-2782... [Pg.95]

Composite materials, prepared with this aluminosilicate network binder and quartz sand, demonstrate a remarkable increase of the chemical durability against water and 70 wt.% H2SO4 (both at 100 °C, 6 h) with rising addition of Al4(P40i2)j up to 30 wt.%. With respect to the useful chemical durability and the compressive strength of about 22 N/mm these composite materials have a large application potential in the fields of waste-water pipes and collection units. [Pg.281]

Being composite materials, prepared by loading an organic matrix with very large amounts of inorganic fillers, typically from 70 to 80% by weight, the appearance and... [Pg.390]


See other pages where Composite materials preparation is mentioned: [Pg.40]    [Pg.131]    [Pg.7]    [Pg.368]    [Pg.19]    [Pg.19]    [Pg.1742]    [Pg.19]    [Pg.127]    [Pg.263]    [Pg.191]    [Pg.502]    [Pg.688]    [Pg.2447]    [Pg.106]    [Pg.412]    [Pg.6320]    [Pg.777]    [Pg.302]    [Pg.1670]    [Pg.412]    [Pg.235]    [Pg.284]    [Pg.284]    [Pg.1823]    [Pg.65]   
See also in sourсe #XX -- [ Pg.245 ]




SEARCH



Composites, preparation

Composition preparation

Material preparation

Preparation of a Composite Material from an Unsaturated Polyester Resin and Glass Fibers

© 2024 chempedia.info