Colloidal definition

Classification Hydrophilic colloid Definition Ammonium salt of alginic acid Empirical (C6H706NH4)n... 

Colloidal silicon dioxide. See Silica, colloidal Silica, fumed Colloidal sulfur Synonyms Sulfur, colloidal Definition Pale yel. dried mixt. of sulfur and acacia Uses Antimicrobial in cosmetics Manuf./Distrib. Aldrich http //www.sigma-aldrich.com, Allan http //www.allanchem.com]... 

Siiica Bead SB-145] Siiica Bead SB-150] Siiica Bead SB-300] Siiica Bead SB-700. See Silica Silic acid (polyortho). See Silica, hydrated Silica, colloidal EINECS/ELINCS 231-545-4 Synonyms Colloidal silica Colloidal silicon dioxide Silica sol Silicon dioxide colloidal Definition A stable dispersion of discrete, colloid-size particles of amorphous silica in aq. sol n. 

Hydroxide Fe(OH)3 (Fe + plus OH ) has definite existence and there are many ill-deiined hydrates used as pigments. FeOOH has two forms goethite and lepidocrocite. Colloidal Fe(OH)3 is easily obtained as a deep red sol. Many Fe(III) hydroxy complexes are known. Fe(OH)2 may be formed from Fe and OH" in the absence of O2 but it is very readily oxidized. 

For tire purjDoses of tliis review, a nanocrystal is defined as a crystalline solid, witli feature sizes less tlian 50 nm, recovered as a purified powder from a chemical syntliesis and subsequently dissolved as isolated particles in an appropriate solvent. In many ways, tliis definition shares many features witli tliat of colloids , defined broadly as a particle tliat has some linear dimension between 1 and 1000 nm [1] tire study of nanocrystals may be drought of as a new kind of colloid science [2]. Much of die early work on colloidal metal and semiconductor particles stemmed from die photophysics and applications to electrochemistry. (See, for example, die excellent review by Henglein [3].) However, the definition of a colloid does not include any specification of die internal stmcture of die particle. Therein lies die cmcial distinction in nanocrystals, die interior crystalline stmcture is of overwhelming importance. Nanocrystals must tmly be little solids (figure C2.17.1), widi internal stmctures equivalent (or nearly equivalent) to drat of bulk materials. This is a necessary condition if size-dependent studies of nanometre-sized objects are to offer any insight into die behaviour of bulk solids. 

The precipitate obtained is in fact colloidal and has no definite composition. Careful drying of the precipitate gives the anhydrous oxide, SnO, which may also be prepared by heating tin(II) ethane-dioate (oxalate) ... 

The traditional view of emulsion stability (1,2) was concerned with systems of two isotropic, Newtonian Hquids of which one is dispersed in the other in the form of spherical droplets. The stabilization of such a system was achieved by adsorbed amphiphiles, which modify interfacial properties and to some extent the colloidal forces across a thin Hquid film, after the hydrodynamic conditions of the latter had been taken into consideration. However, a large number of emulsions, in fact, contain more than two phases. The importance of the third phase was recognized early (3) and the lUPAC definition of an emulsion included a third phase (4). With this relation in mind, this article deals with two-phase emulsions as an introduction. These systems are useful in discussing the details of formation and destabilization, because of their relative simplicity. The subsequent treatment focuses on three-phase emulsions, outlining three special cases. The presence of the third phase is shown in order to monitor the properties of the emulsion in a significant manner. 

Colloidal suspensions are, per definition, mixtures of mesoscopic particles and atomic liquids. What happens if there are several different species of particles mixed in the solvent One can invent several different sorts of mixtures small and large particles, differently charged ones, short and long rods, spheres and rods, and many more. Let us look into the literature. One important question when dealing with systems with several components is whether the species can be mixed or whether there exists a miscibility gap where the components macroscopically phase-separate. 

Lyophobic colloids, ordinarily, have an electric charge of definite sign, which can be changed only by special methods. 

The term particle and particle size are so highly ambiguous as to require precise definition. As used in this article particles will.be limited by size to those distinct entities which have physically detectable boundaries in any direction within the limits of 0.05 and 10 microns (1 micron, p -0.001mm). This size range covers those particles which can be directly measured without magnification down to those which exhibit colloidal behavior... 

With foams, one is dealing with a gaseous state or phase of matter in a highly dispersed condition. There is a definite relationship between the practical application of foams and colloidal chemistry. Bancroft (4) states that adopting the very flexible definition that a phase is colloidal when it is sufficiently finely divided, colloid chemistry is the chemistry of bubbles, drops, grains, filaments, and films, because in each of these cases at least one dimension of the phase is very small. This is not a truly scientific classification because a bubble has a film round it, and a film may be considered as made up of coalescing drops or grains. ... 

The colloidal particles can be crystalline or constitnte an amorphons agglomeration of individual molecnles. The definition also includes nonaggregated large macromolecules such as proteins. An arbitrary distinction is made between hydrophobic colloids (sols) and hydrophilic colloids (gels), which depends on the degree and type of interaction with the aqneons solvent. 

Gustafsson O, Gschwend PM (1996) Aquatic colloids concepts, definitions, and current challenges. Limnol Oceanogr 42 519-528... 

---