Wastewater coke making

About 100 gal of process wastewater is typically generated from 1 t of coke produced.15 These wastewaters from byproduct coke making contain high levels of oil and grease, ammonia nitrogen, sulfides, cyanides, thiocyanates, phenols, benzenes, toluene, xylene, other aromatic volatile components, and polynuclear aromatic compounds. They may also contain toxic metals such as antimony, arsenic, selenium, and zinc. Water-to-air transfer of pollutants may take place due to the escape of volatile pollutants from open equalization and storage tanks and other wastewater treatment systems in the plant. 

Conventional wastewater treatment techniques consist of physical/chemical treatments, including oil separation, dissolved gas flotation, and ammonia distillation (for removal of free cyanides, free sulfides, and ammonia) followed by biological treatment (for organics removal) and residual ammonia nitrification. Almost all residuals from coke-making operations are either recovered as crude byproducts (e.g., as crude coal tar, crude light oil, ammonium sulfate, or other sulfur compounds)... 

Iron making. Molten iron is produced for steel making in blast furnaces using coke, iron ore, and limestone. Blast furnace operations use water for noncontact cooling of the furnace, stoves, and ancillary facilities and to clean and cool the furnace top gases. Other water, such as floor drains and drip legs, contribute a lesser portion of the process wastewaters. 

---