Viscosity coating

A related approach to high solids coatings is to incorporate a reactive chemical as the solvent. This allows control of the coating viscosity during application but minimizes the VOCs released because the solvent is cross-linked into the coating (Johnson, 1995 Robinson et al., 1994 Adams, 1996 Rupa Vani et al., 1993 Kuo et al., 1994 Hoffman, 1995). Reactive diluents take many forms, sometimes even as a natural oil as in the case discussed by Dirlikov et al. (1992) and Banov (1994). 

Coating Method Coating Viscosity, Pa.s Coating Speed, m/min (ft/min) Coating Thickness, pm... 

A high blow ratio Is desired since this creates a large volume of foam with respect to the solids. This serves to minimize variation In dry solids add-on due to variances In knife setting or non-uniform pressure between the two horizontal pad rolls. However, the apparent viscosity of the foamed composition Is directly proportional to Its blow ratio (Figure 5) and the fabric weight and construction will dictate the best coating viscosity for that particular fabric. 

BERSET 2425 is a melamine based coating insolubilizer. It is a very effective crosslinker for starch, protein, P.V.A., and latex binders in pigmented, or non-pigmented coatings. BERSET 2425 is sufficiently reactive so that 80-90% of insolubilization is achieved directly off the machine and completely developed within a day. Unlike other crosslinkers, BERSET 2425 has little or no effect on coating viscosities. BERSET 2425 has an advantage of having a very low free formaldehyde. 

Adjust and influence coating viscosity (thickness of paint)... 

The vinyl latex systems are similar to the solvent vinyl systems with respect to coating characteristics that is, they both have low coating viscosity. Removal of at least 50% of the coating weight as water requires ovens with minimum available temperatures of 212 °F. Since organic solvents are not present, fire hazards are diminished. The high emulsifier levels in these systems will limit their applications where water contact or sensitivity are important... 

Acrylic acid, isodecyl ester Ageflex FA-10 EINECS 215-542-5 HSDB 615 Isodecyl acrylate Isodecyl alcohol, acrylate isodecyl propenoate 2-Propenoic acid, isodecyl ester Sipomer IDA. Used in adhesives, coatings, UV-curable reactive diluent In Inks and coatings, viscosity index improver. Liquid mp a -100 bp = 304 , bp3" 161-163 = 0,864, Rhone Poulenc Surfactants Rit-Chem. 

Cellulose derivatives have found industrial applications for over 150 years. They have been used in such a wide-ranging application adhesives, building materials, inks, and munitions. Within the health and wellness area, cellulose derivatives have a long history of use as binders, coatings, viscosity modifiers, and release modifiers. This entry will present the chemistry of cellulose ethers a key class of cellulose derivatives and the clinical benefits they bring to food and pharmaceutical products. 

Dryer hands width of hands = hot air nozzle diameter, nonuniform air flow/veloc-ity too high/coating too thick/coating viscosity too low. 

---