Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Coatings durability

Ryntz, R. A. Plastics and Coatings Durability, Stabilization Testing, Hansen Gardner 2001. [Pg.353]

The coating durability of organolead-treated southern pine in exterior exposure was reported (144), Significant improvement in the durability of a vinyl-acrylic latex and an alkyd paint on treated wood was demonstrated. Improved durability appeared to be independent of the type or concentration of the organolead-treated compounds. [Pg.441]

The direct correlation observed in this study between gloss loss rates and photoinitiation rates suggests that the nitroxide doping technique could provide a rapid test for the evaluation of coating durability. Measurements of nitroxide decay kinetics to determine coating photoinitiation rates can be made at near ambient exposure conditions in a few days (compared to years for... [Pg.295]

K. Hardcastle and N. D. Searle, in R. A. Ryntz, ed.. Plastics and Coatings, Durability, Stabilization, Testing, Hanser Gardner, Cincinnati, Oh, 2001, Chapter 9. [Pg.356]

The major challenge for the application of TBCs is coating durability, particularly the resistance of the coating to spalling [16]. [Pg.227]

Coating Durability Requirements. The coating durability requirements are... [Pg.1191]

Category 1 Minimum coating durability is required. The PCB is intended to be soldered within 30 days from time of manufacture and likely to experience minimum thermal exposure. [Pg.1191]

Category 2 Average coating durability is required.This classification is intended for PCBs likely to experience storage of up to 6 months from the time of manufacture and moderate thermal or solder exposure. [Pg.1191]

Jin, X., Xiao, C., An, S., Jia, G., 2007a. Investigations on coating durability and tenso-resistive effect of carbon black-coated polycaprolactam fibers. J. Mater. Sci. 42 (12), 4384-A389. http //dx.doi.org/10.1007/sl0853-006 389. [Pg.48]

Hardcastle HK, Searle ND (2001) Weathering test methods. In Ryntz R (ed) Plastics and coatings durability, stabilization, testing. Hanser, Munich, pp 189-240, Chapter 9... [Pg.184]

Grull, G., Tscheme, F., Spitaler, I., Forsthuber, B. Comparison of wood coating durability in natural weathering and artificial weathering using fluorescent UV-lamps and water. Eur. J. Wood Wood Prod. 72, 367-376 (2014)... [Pg.108]

DY Perera. Role of stress on durability of organic coatings. In RA Ryntz, ed. Plastics and Coatings Durability, Stabilization, Testing. Cincinnati Hanser Gardner, 2001, pp 115-119. [Pg.198]

See other pages where Coatings durability is mentioned: [Pg.433]    [Pg.304]    [Pg.310]    [Pg.78]    [Pg.119]    [Pg.126]    [Pg.587]    [Pg.285]    [Pg.298]    [Pg.294]    [Pg.558]    [Pg.574]    [Pg.783]    [Pg.114]    [Pg.809]    [Pg.207]    [Pg.24]    [Pg.1190]    [Pg.1191]    [Pg.1191]    [Pg.461]    [Pg.604]    [Pg.556]    [Pg.74]    [Pg.153]    [Pg.173]    [Pg.131]   
See also in sourсe #XX -- [ Pg.77 ]



SEARCH



Acrylic coating polymers durability

Coating durability, testing

Durability of Coatings

Durability of commercial coatings and paints

Environmental durability coatings

Surface coatings durability testing

© 2024 chempedia.info