Coated particles Microspheres

High-pressure liquid chromatography (HPLC) is a variant of the simple column technique, based on the discovery that chromatographic separations are vastly improved if the stationary phase is made up of very small, uniformly sized spherical particles. Small particle size ensures a large surface area for better adsorption, and a uniform spherical shape allows a tight, uniform packing of particles. In practice, coated Si02 microspheres of 3.5 to 5 fxm diameter are often used. 

Emulsions and suspensions are colloidal dispersions of two or more immiscible phases in which one phase (disperse or internal phase) is dispersed as droplets or particles into another phase (continuous or dispersant phase). Therefore, various types of colloidal systems can be obtained. For example, oil/water and water /oil single emulsions can be prepared, as well as so-called multiple emulsions, which involve the preliminary emulsification of two phases (e.g., w/o or o/w), followed by secondary emulsification into a third phase leading to a three-phase mixture, such as w/o/w or o/w/o. Suspensions where a solid phase is dispersed into a liquid phase can also be obtained. In this case, solid particles can be (i) microspheres, for example, spherical particles composed of various natural and synthetic materials with diameters in the micrometer range solid lipid microspheres, albumin microspheres, polymer microspheres and (ii) capsules, for example, small, coated particles loaded with a solid, a liquid, a solid-liquid dispersion or solid-gas dispersion. Aerosols, where the internal phase is constituted by a solid or a liquid phase dispersed in air as a continuous phase, represent another type of colloidal system. 

Katagiri et al. reported the preparation of hollow Ti02 microspheres by layer-by-layer assembly of TALH and positively charged polyelectrolytes on colloidal silica templates [65]. Hydrothermal treatment of the Ti02-coated particles led to... 

Thermal analysis techniques reveal that water is bound in opal in more than one manner. Most of the water is physically held in inclusions or microscopic pores within the opal, that is, in spaces between the microspheres. Water held in this manner can escape through complex systems of microscopic fissures or cracks, induced by temperatures even below 100°C. Some water is held within the opal via chemical bonding ( adsorption ) to the surfaces of the silica microspheres and is retained to temperatures approaching 1000°CJ7J Furthermore, since the microspheres themselves are composed of much smaller silica particles, water is additionally coated on the surfaces of these minute particles. The porous nature of opal and its thermal sensitivity require special care, for dehydration may result in cracking that greatly diminishes the value of this gemstone. 

Other NAD microspheres are composed of styrene, MMA, hydroxyethyl acrylate, acrylic acid and acrylonitrile and are blended with acrylic copolymers and melamine/formaldehyde resins [341,342]. Particles of this polymer are used as rheology modifiers to prevent sagging in automotive coatings and for controlling the orientation of metal flake pigments. 

As a simple and practical alternative to coated microspheres, submicron particles of pendant amine-functionalized PPE 39 could be fabricated by phase... 

The fuel particles used in these studies were typical pyrolytic carbon-coated thorium-uranium dicarbide, (Th,U)C2, microspheres. The kernels, — 200/i in diameter, were prepared from Th02, U02, and C and converted to the carbide at temperatures below 2200°C., followed by a spheroidization above the melting point, 2450°-2500°C. The bare kernels were coated with a 30-50fi layer of low density (— 1.0 gram/cm.3) buffer pyrolytic carbon, followed by a 40-70/a layer of high density... 

---