Classification tables

If a nonattainment area is classified as serious, based on ambient ozone measurements, then the state must modify its SIP to bring the area into compliance in 9 years. The CAAA90 also specify the size and, therefore, the number of sources subject to regulatory control as a function of nonattainment classification. Table 24-3 illustrates these requirements for ozone nonattainment classifications of extreme and severe the state must include... 

Plastic additives account for 15-20 wt% of the total volume of plastic products marketed. Estimates of the size of the world additives market vary considerably according to classification. Table 1.4 shows... 

Due to the high densities of metals, the resulting classification (Table 1.7 and Figures 1.5 and 1.6) is different from that of the mechanical properties alone. 

As for the specific mechanical properties, the high densities of metals modify the classification (Table 1.11 and Figure 1.9) of the various materials. 

Classification Table (Model Diagnostic) The classification table can aid in determining which classes are not well separated. It summarizes how the samples from each of the classes are classified for a given value of K. Table -t.7 is the Classification Table for this example when considering three nearest neighbors. The first row indicates that the 10 samples in class A are all classified as belonging to class A. Similarly, the second row indicates that all 10 class... 

TABLE 4.7. Classification Table with Three Nearest Neighbors for KNN Example 1... 

TABLE 4.14. Classification Table with One, Two, or Three Nearest Neighbors... 

Classification table (table of actual vs. predicted class for a given IQ... 

Classiflcation Table (Model Diagnostic) The classification table also indi-ates that the classes are clearly distinguishable using these measurements (see Table 4.14). This table is identical whether K = 1, 2, or 3. 

The various separations as used for the old QD classes have not been changed, but new storage compatibility groups (SCG) are used with the new system. Table 2 compares the SCG with the old DOT and the old military hazard classifications. Table 3 was excerpted from the UN safety standards and lists QD values in metric units... 

The stretching frequencies attributed to the 0-0 vibration are closely related to the structural type. Type I complexes show 0-0 stretching vibrations around 1125 cm-1 and type II around 860 cm-1. This sharp difference enables the O-O stretching frequency as measured by infrared or Raman spectroscopy to be used for structure type classification. Table 16.2.2 lists the structural data of dioxygen metal complexes. 

Table 45 gives a gross survey of the numbers of all-benzenoids with trigonal symmetry. As a finer classification, Tables 46 and 47 show the known numbers of the catacondensed and pericondensed all-benzenoids with trigonal symmetry in continuation of Tables 41 and 42, respectively. It is apparently still much work which could be done in this area. With regard to the catacondensed all-benzenoids with D3h symmetry we believe that after the unique system with h = 31 there come 2 systems with h = 49, and thereafter 7 systems with h = 67. 

Materials of construction may be divided into the two general classifications of metals and nonmetals. Pure metals and metallic alloys are included under the first classification. Table 1 presents data showing the comparison of purchased cost for various types of metals in plate form. 

Collectively, the work by Mimro et al. (1996) and Kroes et al. (2000, 2004) proposed several thresholds of toxicological concern based on toxicological and structural classifications. Table 7.2 summarizes these thresholds, which are cumulative as dietary concentrations increase. These thresholds are based on the analysis of compounds grouped using the so-called Cramer decision tree and on the structural analysis of compounds testing positive for specific toxic endpoints. Maintenance of such a system depends upon maintenance of the decision tree and the ability to continue to discern relationships between toxicity effects and structural information and to then translate those relationships into a decision tree. 

Make-up catalyst, to replace catalyst lost or intentionally discarded, is added from a hopper into the feed line to one of the elevators. Selective discard of low-activity portions of the catalyst is sometimes practiced, with the aid of a gravity-classification table (342). Separation of the low-activity particles depends upon the fact that particle density increases as the catalyst deactivates. 

Paracetamol is an example of a medicine where the pack size makes a big difference to its legal classification. Table 1.1 lists the various pack sizes available. 

Taxane alkaloids have a very limited distribution within the plant kingdom, and occur only in two genera of the yew family (Taxus and Austrotaxus). The genus Austrotaxus is monotypic (A. spicata Compt), but contusion exists on the systematics of the genus Taxus, especially as regards the taxonomic status of certain Asian yews. Reference will be given here to the Krttssmann classification (Table 1) [28]. 

If, in the context of the survival distribution we consider all of the times at which an event occurred and index them as t(l) < t(2) < t(3). . . < t(H), it is possible to create a 2 X 2 classification table for event times t h), where h = 1, 2, 3,. . ., H in which the numbers of individuals with and without the event of interest are displayed for each group. Table 11.10 is a sample cross-classification table for time h. 

Table 11.10 Cross-classification table and event at time h of treatment...

The most widespread classification by operational properties and areas of application of motor oils is the API classification (Table 1.7). 

---