Cinnamaldehydes catalytic

Pyrolytic Decomposition. The pyrolytic decomposition at 350—460°C of castor oil or the methyl ester of ricinoleic acid spHts the ricinoleate molecule at the hydroxyl group forming heptaldehyde and undecylenic acids. Heptaldehyde, used in the manufacture of synthetic flavors and fragrances (see Elavors and spices Perfumes) may also be converted to heptanoic acid by various oxidation techniques and to heptyl alcohol by catalytic hydrogenation. When heptaldehyde reacts with benzaldehyde, amyl cinnamic aldehyde is produced (see Cinnamic acid, cinnamaldehyde, and cinnamyl... 

Beller and coworkers reported hydrosilylation reactions of organic carbonyl compounds such as ketones and aldehydes catalyzed by Fe(OAc)2 with phosphorus ligands (Scheme 21). In case of aldehydes as starting materials, the Fe(OAc)2/PCy3 with polymethylhydrosiloxane (PMHS) as an H-Si compound produced the corresponding primary alcohols in good to excellent yields under mild conditions [67]. Use of other phosphorus ligands, for instance, PPhs, bis(diphenylphosphino) methane (dppm), and bis(diphenylphosphino)ethane (dppe) decreased the catalytic activity. It should be noted that frans-cinnamaldehyde was converted into the desired alcohol exclusively and 1,4-reduction products were not observed. 

In continuation of a previous work (1), catalytic hydrogenation of cinnamaldehyde has been studied in slurry phase using a high-pressure autoclave. A series of carbon powder (CP)-supported Pt catalysts with widely varying Pt dispersion and Pt location on the support has been used in the study. The purpose has been to find out how the location of the metal on the support and its dispersion affect the two parallel reaction paths, namely the hydrogenation of the C=0 and C=C bonds. 

The disilanickela complex 21 was also found to be a good catalyst for the dehydrogenative double silylation of aldehydes. The nickel-catalyzed reactions of 1,2-bis(dimethylsilyl)carborane 11 with aldehydes such as isobutyraldehyde, trimethylacetaldehyde, hexanal, and benzaldehyde afforded 5,6-carboranylene-2-oxa-l,4-disilacyclohexane.32 34 36 The dehydrogenative 1,4-double silylation of methacrolein and tram-4-phenyl-3-buten-2-one in the presence of a catalytic amount ofNi(PEt3)4 also took place under similar conditions. In contrast, the reaction of 11 with a-methyl-tran.s-cinnamaldehyde and irans-cinnamaldehyde under... 

Superior yields of ethers from aldehydes are obtained by the use of several other electrophilic species. The addition of 5 mol% of trityl perchlorate to a mixture of triethylsilane and 3-phenylpropanal in dichloromethane at 0° produces an 83% yield of bis-(3-phenylpropyl) ether within 10 minutes (Eq. 176),329 Reductive polycondensation of isophthalaldehyde occurs with two equivalents of triethylsilane in the presence of 10 mol% of trityl perchlorate to give 40-72% yields of polyether with average molecular weights ranging from 6,500 to 11,400 daltons (Eq. 177).337 Addition of one equivalent of an alkoxytrimethylsilane to the reaction mixture produces unsymmetrical ethers in good to excellent yields. Thus, a mixture of (ii)-cinnamaldehyde, 3-phenylpropoxytrimethylsilane, and triethylsilane in dichloromethane reacts under the influence of a catalytic amount of trityl perchlorate to give the unsymmetrical ether in 88% yield (Eq. 178).329... 

In a somewhat different approach, supported-aqueous-phase-catalysts (SAPC, see Chapter 5, Section 5.2.5 of this book) have been combined with supercritical CO2 in catalytic hydrogenation [55], Ruthenium was supported on silica and combined with the ligand TPPTS in water, after which a scC02/H2 phase was applied together with the substrate. Better levels of conversion were obtained using scC02 than the equivalent system with toluene for the hydrogenation of cinnamaldehyde. 

The catalytic system of [Ir(COD)Cl]2 with an excess of the bulky phosphine P(o-MeOPh)3 under transfer hydrogenation conditions of propan-2-ol and KOH was used successfully in the selective hydrogenation of cinnamaldehyde (Scheme 15.4) [4]. Selectivity and activity were found to increase with increasing P/Ir ratios, and complete conversion was achieved in as little as 5 minutes (turnover frequency (TOF) 6000 IT1). 

More recent advances in iridium-catalyzed aldehyde hydrogenation have been through the use of bidentate ligands [6]. In the hydrogenation of citral and cinnamaldehyde, replacing two triphenylphosphines in [IrH(CO)(PPh3)3] with bidentate phosphines BDNA, BDPX, BPPB, BISBI and PCP (Fig. 15.1) led to an increase in catalytic activity. 

Morimoto, Kakiuchi, and co-workers were the first to show that aldehydes are a useful source of CO in the catalytic PKR [68]. Based on 13C-labeling experiments, it was proposed that after decarbonylation of the aldehyde, an active metal catalyst is formed. This was proven by the absence of free carbon monoxide. As a consequence CO, which is directly generated by previous aldehyde decarbonylation, is incorporated in situ into the carbonylative coupling. The best results were obtained using C5F5CHO and cinnamaldehyde as CO source in combination with [RhCl(cod)]2/dppp as the catalyst system. In the presence of an excess of aldehyde the corresponding products were isolated in the range of 52-97%. 

A typical probe reaction for estimating catalytic properties in selective hydrogenations is the hydrogenation of cinnamaldehyde. This molecule contains both a C=C and a C=0 double bond, thus the formation of hydrocinnamaldehyde and/or cinnamyl alcohol by reduction of the one or the other, or the formation of phenyl propanol in the case of complete reduction may indicate the potential of the catalyst for other fine chemical transformations. Indeed, this reaction was one of the first to be tested by CNT-supported catalysts [120]. Noble metals show a high activity in this reaction and... 

Another a, i-unsaturated aldehyde analyzed is cinnamaldehyde. Its liquid-phase hydrogenation has been studied in our research group [20, 51, 94], using Pt, Ni and Cu-based tin-modified hi- and organobimetaUic catalysts (in all cases with Si02 as support). The catalytic results obtained showed that in aU cases there was a marked promoting effect of Sn on the selectivity to cinnamic alcohol (UOL). The specific modification of the monometallic systems due to Sn addition from the application of SOMC/M markedly increases the selectivity to UOL, especially in the case of Ni, where it goes from zero selectivity for the monometallic to 25% for the NiSn catalyst. Pt-based systems modified by Sn yield the best Suol values. 

The catalytic activity of a lanthanum (R)-BINOL complex tethered either on silica (62a) or MCM-41 (62b) was evaluated for the enantioselective nitroaldol reaction of cyclohexanecarboxaldehyde (Se), hexanal (Sf), iso-butyraldehyde (Sg) and hydro-cinnamaldehyde (Sh) with nitromethane inTHF (Scheme 12.22) [166]. The silica-anchored lanthanum catalyst 62a gave 55-76% e.e. and yields up to 87%, while the PMS-immobilized catalyst 62b revealed slightly higher e.e.s (57-84%) for the same aldehydes. The homogeneous counterparts showed similar catalytic performance, albeit within a shorter reaction time. The increased enantioselectivity observed for the MCM-41 hybrid catalyst 62b was explained by transformations inside the channels, which is also reflected by lower yields due to hindered diffusion. The recyclability of the immobilized catalysts 62b was checked with hydrocin-namaldehyde (Ph). It was found that the reused catalyst gave nearly the same enantioselectivities after the fourth catalytic run, although the time period for achieving similar conversion increased from initially 30 to 42 h. 

Reduction of the double bond only was achieved by catalytic hydrogenation over palladium prepared by reduction with sodium borohydride. This catalyst does not catalyze hydrogenation of the aldehyde group [31]. Also sodium borohydride-reduced nickel was used for conversion of cinnamaldehyde to hydrocinnamaldehyde [31]. Homogeneous hydrogenation over tris(triphenylphosphine)rhodium chloride gave 60% of hydrocinnamaldehyde and 40% of ethylbenzene [5(5]. Raney nickel, by contrast, catalyzes total reduction to hydrocinnamyl alcohol [4S. Total reduction of both the double... 

Ogilvie monitored the Diels-Alder reaction between cinnamaldehyde and cyclopentadiene by H NMR using his hydrazide catalyst 18 and was able to conclude that under the reaction conditions adopted (18-TfOH 100 mol% CDjNOj/D O (19 1) 0.1 M) cycloaddition was the rate limiting step of the catalytic cycle, iminium ion formation and hydrolysis being rapid [48]. In addition, it was also shown that under these reaction conditions the key cycloaddition step was reversible. Although this unexpected reversibility was slow, the possibility of exploiting this in a dynamic resolution procedure appears tempting. 

Prior to this work, Renaud and coworkers described an alternative phosphoric acid-catalyzed approach to DHPs 113 commencing with p-enaminoesters such as 114 and cinnamaldehydes 111. Besides developing a catalytic nonasymmetric protocol, the authors attempted a BINOL phosphate (5)-3k-catalyzed (R = 1-naphthyl) asymmetric version attaining moderate enantioselectivity (50% ee) (Scheme 45) [70]. 

Scheme 7.41). It seems to be reasonable to presume that the isomerization of propargylic alcohol to cinnamaldehyde proceeds via an intramolecular nucleophilic attack of coordinated water on an electropositive a-carbon of the allenylidene ligand (Scheme 7.42). Then, dicationicdiruthenium complexes work as Lewis acids to promote the aldol condensation between cinnamaldehyde and acetone. Thus, the dual catalytic activity of dicationic chalcogenolate-bridged diruthenium complexes is essential to promote the present novel reaction between propargylic alcohols and acetone. 

Silver acetate has a small catalytic effect on the alkene substitution reaction but 5 equiv. of the salt only give 140% of stilbene in the styrene phenylation, based upon palladium.15 The same reaction carried out at 80 C under 300 lbf in-2 (1 lbf in-2 = 6.89 kPa) of oxygen gives stilbene in 248% yield, based upon palladium.16 The best reoxidation reagent is f-butyl perbenzoate, which yields 10-14 turnovers of the palladium in the vinyl substitution of cinnamaldehyde and similar alkenes with benzene.17... 

Yamamoto has recently described a novel catalytic, asymmetric aldol addition reaction of enol stannanes 19 and 21 with aldehydes (Eqs. 8B2.6 and 8B2.7) [14]. The stannyl ketones are prepared solvent-free by treatment of the corresponding enol acetates with tributyltin methoxide. Although, in general, these enolates are known to exist as mixtures of C- and 0-bound tautomers, it is reported that the mixture may be utilized in the catalytic process. The complexes Yamamoto utilized in this unprecedented process are noteworthy in their novelty as catalysts for catalytic C-C bond-forming reactions. The active complex is generated upon treatment of Ag(OTf) with (R)-BINAP in THF. Under optimal conditions, 10 mol % catalyst 20 effects the addition of enol stannanes with benzaldehyde, hydrocinnamaldehyde, or cinnamaldehyde to give the adducts of acetone, rerf-butyl methyl ketone (pinacolone), and acetophenone in good yields and 41-95% ee (Table 8B2.3). 

In accessing chiral allyl vinyl ethers for Claisen rearrangement reactions, Nelson et al. employed the iridium-mediated isomerization strategy. Thus, the requisite enantioenriched diallyl ether substrate 28 was synthesized via a highly enantioselective diethylzinc-aldehyde addition protocol10 (Scheme 1.1k). The enantioselective addition of Et2Zn to cinnamaldehyde catalyzed by (—)-3-exo-morpholinoisobomeol (MIB 26)11 provided an intermediate zinc alkoxide (27). Treatment of 27 with acetic acid followed by 0-allylation in the presence of palladium acetate delivered the 28 in 73% yield and 93% ee. Isomerization of 28 with a catalytic amount of the iridium complex afforded the allyl vinyl ether... 

---