Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chirality modifiers

This chiral modifier provides one of the only methods for selective cyclopropa-nation of substrates which are not simple, allylic alcohols. In contrast to the catalytic methods which will be discussed in the following section, the dioxaborolane has been shown to be effective in the cyclopropanation of a number of allylic ethers [67]. This method has also been extended to systems where the double... [Pg.119]

A convenient route to highly enantiomerically enriched a-alkoxy tributylslannanes 17 involves the enanlioselective reduction of acyl stannanes 16 with chiral reducing agents10. Thus reaction of acyl stannanes with lithium aluminum hydride, chirally modified by (S)-l,l -bi-naphthalene-2,2 -diol, followed by protection of the hydroxy group, lead to the desired a-alkoxy stannanes 17 in optical purities as high as 98 % ee. [Pg.123]

Despite the undefined nature of the organometallic species, chirally modified organotita-nium reagents are useful tools in enantioselective synthesis. In particular, the binaphthol-mod-ified phenyltitanium reagent 41 shows excellent enantioselectivity in additions to aromatic aldehydes34-40,41. [Pg.161]

Recently, Akiyama et al. reported an enantiocontrolled [3+2] cycloaddition of chirally modified Fischer alkenylcarbene complexes 180 with aldimines 181 under Lewis-acid catalysis (Sn(OTf)2) to afford enantiomerically pure 1,2,5-trisubstituted 3-alkoxypyrrolines 182 (Scheme 40) [121]. The mode of formation of these products 182 was proposed to be a [4+2] cycloaddition, with the complexes 180 acting as a 1-metalla- 1,3-diene with subsequent reductive elimination. Upon hydrolysis under acidic conditions, the enol ethers give the enantiomerically pure 3-pyrrolidinones 183 (Table 9). [Pg.53]

Scheme 40 Synthesis of enantiomerically pure 1,2,5-trisubstituted 3-pyrrolidinones 183 from chirally modified 1-alkoxypropenylidene complexes 180 and aldimines [121]. For further details see Table 9... Scheme 40 Synthesis of enantiomerically pure 1,2,5-trisubstituted 3-pyrrolidinones 183 from chirally modified 1-alkoxypropenylidene complexes 180 and aldimines [121]. For further details see Table 9...
In 20 years of usage, a,/J-unsaturated Fischer carbene complexes demonstrated their multitalented versatility in organic synthesis, yet new reaction types are still being discovered every year. In view of their facile preparation and multifold reactivity, their versatile chemistry will undoubtedly be further developed and applied in years to come. The application of chirally modified Fischer carbene complexes in asymmetric synthesis has only begun, and it will probably be an important area of research in the near future. [Pg.54]

Asymmetric versions of the cyclopropanation reaction of electron-deficient olefins using chirally modified Fischer carbene complexes, prepared by exchange of CO ligands with chiral bisphosphites [21a] or phosphines [21b], have been tested. However, the asymmetric inductions are rather modest [21a] or not quantified (only the observation that the cyclopropane is optically active is reported) [21b]. Much better facial selectivities are reached in the cyclopropanation of enantiopure alkenyl oxazolines with aryl- or alkyl-substituted alkoxy-carbene complexes of chromium [22] (Scheme 5). [Pg.65]

Asymmetric induction in the intermolecular Diels-Alder cycloaddition reactions can be achieved with chirally modified dienes and dienophiles as well as with chiral Lewis-acid catalysts [54-56]. [Pg.116]

Enders and coworkers <96AG(E)1725> have developed an interesting general one-pot method for the asymmetric epoxidation of enones with oxygen in the presence of diethylzinc and (l ,/ )-N-methylpseudoephedrine (30), which provides a, P - epoxyketones in very high yield and high enantiomeric excess (e.g., 33 —> 34). The actual reactive species is believed to be the chirally modified alkoxy(ethylperoxy)zinc 31, which attacks the si face of the s-cis conformation of the (E) enones (cf. 32). [Pg.47]

Among the various strategies [34] used for designing enantioselective heterogeneous catalysts, the modification of metal surfaces by chiral auxiliaries (modifiers) is an attractive concept. However, only two efficient and technically relevant enantioselective processes based on this principle have been reported so far the hydrogenation of functionalized p-ketoesters and 2-alkanons with nickel catalysts modified by tartaric acid [35], and the hydrogenation of a-ketoesters on platinum using cinchona alk oids [36] as chiral modifiers (scheme 1). [Pg.55]

Theoretical studies aimed at rationalizing the interaction between the chiral modifier and the pyruvate have been undertaken using quantum chemistry techniques, at both ab initio and semi-empirical levels, and molecular mechanics. The studies were based on the experimental observation that the quinuclidine nitrogen is the main interaction center between cinchonidine and the reactant pyruvate. This center can either act as a nucleophile or after protonation (protic solvent) as an electrophile. In a first step, NH3 and NH4 have been used as models of this reaction center, and the optimal structures and complexation energies of the pyruvate with NH3 and NHa, respectively, were calculated [40]. The pyruvate—NHa complex was found to be much more stable (by 25 kcal/mol) due to favorable electrostatic interaction, indicating that in acidic solvents the protonated cinchonidine will interact with the pyruvate. [Pg.56]

An attractive alternative to these novel aminoalcohol type modifiers is the use of 1-(1-naphthyl)ethylamine (NEA, Fig. 5) and derivatives thereof as chiral modifiers [45-47]. Trace quantities of (R)- or (S)-l-(l-naphthyl)ethylamine induce up to 82% ee in the hydrogenation of ethyl pyruvate over Pt/alumina. Note that naphthylethylamine is only a precursor of the actual modifier, which is formed in situ by reductive alkylation of NEA with the reactant ethyl pyruvate. This transformation (Fig. 5), which proceeds via imine formation and subsequent reduction of the C=N bond, is highly diastereoselective (d.e. >95%). Reductive alkylation of NEA with different aldehydes or ketones provides easy access to a variety of related modifiers [47]. The enantioselection occurring with the modifiers derived from NEA could be rationalized with the same strategy of molecular modelling as demonstrated for the Pt-cinchona system. [Pg.58]

Not so long ago, the general opinion was that high enantioselectivity can only be achieved with natural, structurally unique, complex modifiers as the cinchona alkaloids. Our results obtained with simple chiral aminoalcohols and amines demonstrate the contrary. With enantiomeric excesses exceeding 80%, commercially available naphthylethylamine is the most effective chiral modifier for low-pressure hydrogenation of ethyl pyruvate reported to... [Pg.58]

ABSTRACT Zeolite Y modified with chiral sulfoxides has been foimd catal rtically to dehydrate racemic butan-2-ol enantioselectively depending on the chiral modifier used. Zeolite Y modified with R-l,3-dithiane-1-oxide shows a higher selectivity towards conversion of S-butan-2-ol and the zeolite modified with S-2-phenyl-3-dithiane-1-oxide reacts preferentially with R-butan-2-ol. Zeolite Y modified with dithiane oxide demonstrates a significantly higher catalsdic activity when compared to the unmodified zeolite. Computational simulations are described and a model for the catalytic site is discussed. [Pg.211]

Taking Tomioka s pioneering work [8] as a precedent, we have screened 13-amino alcohols as chiral modifiers [9] in the nucleophilic addition of lithium 2-pyridinylacetylide 6 to the pMB protected ketimine 5. We were pleased to discover that when 5 was treated with a mixture prepared from 1.07 equiv each of quinine and 2-ethynylpyridine by addition of 2.13 equiv of n-BuLi in THF at -40 to -20 °C, the desired adduct 19 was obtained in 84% yield with maximum 64% ee. Soon after, we found selection of the nitrogen protective group had great influence on the outcome of the asymmetric addition and the ANM (9-anthranylmethyl)... [Pg.7]

Introduction Since we had already developed the novel asymmetric addition of lithium acetylide to ketimine 5, we did not spend any time on investigating any chiral resolution methods for Efavirenz . Our previous method was applied to 41. In the presence of the lithium alkoxide of cinchona alkaloids, the reaction proceeded to afford the desired alcohol 45, as expected, but the enantiomeric excess of 45 was only in the range 50-60%. After screening various readily accessible chiral amino alcohols, it was found that a derivative of ephedrine, (1J ,2S) l-phenyl-2-(l-pyrrolidinyl)propan-l-ol (46), provided the best enantiomeric excess of 45 (as high as 98%) with an excellent yield (vide infra). Prior to the development of asymmetric addition in detail, we had to prepare two additional reagents, the chiral modifier 46 and cyclopropylacetylene (37). [Pg.23]

Preparation of the chiral modifier-(1R,2S)-1-phenyl-2-(1-pyrrol id iny)propan-1-ol (46)... [Pg.23]

Asymmetric addition of acetylide to the ketone Having the two key reagents in hand, we optimized the asymmetric addition reaction on ketone 41. First, chiral modifiers were screened from among readily accessible P-amino alcohols and the results are summarized in Table 1.5. [Pg.24]

Among them, (1 R,2S)-l-phenyl-2-(l-pyrrolidinyl)propan-l-ol (46) was selected as a chiral modifier for further optimization. It is interesting to point out that N-methyl ephedrine was not a suitable chiral modifier for ketimine 5 (only 10% ee as shown in Table 1.2), but in the case of ketone 41, N-methyl ephedrine provided a respectable 53% ee, as shown in Table 1.5. [Pg.24]

Experimentally, a chiral nucleophile was prepared by reaction of n-BuLi (or n-HexLi) with a mixture of chiral modifier 46 and cyclopropylacetylene 37 at -10 to... [Pg.26]


See other pages where Chirality modifiers is mentioned: [Pg.87]    [Pg.115]    [Pg.115]    [Pg.116]    [Pg.116]    [Pg.118]    [Pg.121]    [Pg.139]    [Pg.339]    [Pg.339]    [Pg.153]    [Pg.158]    [Pg.133]    [Pg.22]    [Pg.73]    [Pg.313]    [Pg.55]    [Pg.56]    [Pg.212]    [Pg.212]    [Pg.218]    [Pg.226]    [Pg.81]    [Pg.270]    [Pg.76]    [Pg.63]    [Pg.21]    [Pg.23]    [Pg.23]    [Pg.24]   
See also in sourсe #XX -- [ Pg.255 ]




SEARCH



Acetophenones chirally modified lithium aluminum hydride

Adsorption chirally modified

Binaphthyl- and biphenyl-modified chiral

Borane chirally modified

Catalysts chirally modified

Chiral Auxiliary Modified Substrates

Chiral Recognition Using Modified Cyclodextrins

Chiral catalysts modified solid

Chiral method development modifiers

Chiral modified CyDs

Chiral modified catalytically active

Chiral modifiers

Chiral modifiers

Chirally Modified Heterogeneous Hydrogenation Catalysts

Chirally modified metal surfaces

Chirally modified zeolite

Cyclodextrins, modified, chiral separation

Cyclodextrins, modified, chiral separation using

Diethylzinc chiral modified

Enantioselective chirally modified metal surfaces

Enantioselective cinchona-based chiral modifiers

Heterogeneous asymmetric catalysis chirally modified catalysts

Hydride reagents chirally modified

Hydrogenation chirally modified

Hydrogenation chirally modified metal surface

Lithium aluminum hydride chirally modified

Lithium aluminum hydride reductions chirally modified

Metal Modified by a Soluble Chiral Compound

Olefins chirally modified

Recent Michael-Type Reactions Using Chirally Modified ,-Substituted Carbonyl Compounds

Reduction chirally modified hydride reagents

Sodium borohydride chirally modified

Titanium reagents, chirally modified

Titanium reagents, chirally modified carbonyl compounds

Titanium reagents, chirally modified enantioselective addition

© 2024 chempedia.info