China clay, reinforcing fillers

Particulate fillers are divided into two types, inert fillers and reinforcing fillers. The term inert filler is something of a misnomer as many properties may be affected by incorporation of such a filler. For example, in a plasticised PVC compound the addition of an inert filler will reduce die swell on extrusion, increase modulus and hardness, may provide a white base for colouring, improve electrical insulation properties and reduce tackiness. Inert fillers will also usually substantially reduce the cost of the compound. Amongst the fillers used are calcium carbonates, china clay, talc, and barium sulphate. For normal uses such fillers should be quite insoluble in any liquids with which the polymer compound is liable to come into contact. 

This term is applied to a wide variety of materials known chemically as hydrated aluminium silicates, used as inorganic fillers. China clay (kaolin) shows a slight reinforcing effect treated clays show considerably greater reinforcement. 

The proven compounding practice for the natural rubber layer is to load it with 30 phr of graphite, 30 phr of semi-reinforcing carbon black filler and 50 phr of inert filler, china clay. A low sulfur curing system is adopted for heat resistance with a suitable antioxidant to prevent flex-cracking. A typical chlorine resistant soft natural rubber compound formula is given in Table 3.2. 

Fillers may be divided into particulate and fibrous types. Particulates include calcium carbonate, china clay, talc and barium sulphate. Fillers affect shrinkage on moulding and the dimensional stability of the finished plastic, increase tensile strength and hardness, enhance electrical insulation properties and reduce tackiness. They also impart opacity and colour (Figure 3.16). Carbon black is now the most widely used filler for polymers usually in the form of furnace carbon black, which has a particle diameter of 0.08 mm. Fibrous fillers reinforce polymers and greatly increase their tensile strengths. They include fibres of glass, textile and carbon. Plastics filled with fibrous fillers are known as composites. 

UPE resins can be used as clear castings or in combination with particulate fillers or fibres. The resin was developed to meet the demand of lightweight materials in military application. The first functional use of UPE was in radome. Because of the obvious advantages of easy processability and low cost, it was used in a wide range of applications in civil sectors such as tanks, pipes, and electronic gears. Some of the important products based on cast UPE resins are encapsulation of electronic assembly, buttons, door handles, knives, umbrellas, industrial wood and furniture finishing. A filled resin system using limestone, silica, and china clay are used for floor tiles. The major use of UPE is as a matrix for fibre-reinforced composites. Such composites have wide applications in automobile and construction industries such as boats, water-skis and television antennae. Examples of applications of UPE resins are presented in Table 2.7. 

China clay is a widely used white filler in the rubber industry. Depending on particle size, it can be used as a semi-reinforcing filler (hard clay) or a non-reinforcing filler (soft clay) in such applications as chemical liners, bicycle tyres, conveyor belts, shoe soles, gaskets and flooring. Its use in plastics is much more limited. In thermoplastics it is used for speciality antiblocking, in thermosets it is used in urea-, phenol- and melamine formaldehyde, in unsaturated polyesters, and in epoxy resins. 

Polyphenylene sulfide is a high temperature, stiff, fire-resistant, chemically resistant plastic, which has a very low melt viscosity and accepts fillers and reinforcing agents very well. Talc, china clay, dolomite, quartz and glass fibre filled grades are all available but volumes are very small and the situation changes very rapidly. 

---