Charge Carrier Properties

Impedance measurement can be considered a third way to evaluate electrochemical sensors besides potentiometry and amperometry. Electrochemical impedance studies in a narrower sense deal with phenomena at the electrode surface. The overall impedance of a chemosensor also includes effects of charge carrier properties far from the electrode. This was visualized by equivalence circuits presented in Chaps. 2 and 5. By individual experimental design, the study can be focused more on processes at the electrode surface or otherwise on ion properties in homogeneous solution. Even the variation of the dielectric constant in a layer will affect the overall impedance. If impedimetry is designed only to acquire data corresponding to ionic properties or value of the dielectric constant, it is not really an electrochemical method, in a strict sense. 

Magnetoelectric and Charge Carrier Properties Magnetoresistance and Related Properties... 

The behavior of ionic liquids as electrolytes is strongly influenced by the transport properties of their ionic constituents. These transport properties relate to the rate of ion movement and to the manner in which the ions move (as individual ions, ion-pairs, or ion aggregates). Conductivity, for example, depends on the number and mobility of charge carriers. If an ionic liquid is dominated by highly mobile but neutral ion-pairs it will have a small number of available charge carriers and thus a low conductivity. The two quantities often used to evaluate the transport properties of electrolytes are the ion-diffusion coefficients and the ion-transport numbers. The diffusion coefficient is a measure of the rate of movement of an ion in a solution, and the transport number is a measure of the fraction of charge carried by that ion in the presence of an electric field. 

The amorphous orientation is considered a very important parameter of the microstructure of the fiber. It has a quantitative and qualitative effect on the fiber de-formability when mechanical forces are involved. It significantly influences the fatigue strength and sorptive properties (water, dyes), as well as transport phenomena inside the fiber (migration of electric charge carriers, diffusion of liquid). The importance of the amorphous phase makes its quantification essential. Indirect and direct methods currently are used for the quantitative assessment of the amorphous phase. 

The photoinduced absorption and the electrical characteristics of the conjugated LPPP show that the optoelectrical properties are strongly dependent on charge carrier traps in the bandgap. From aromatic molecular crystals it is known that impurities and structural imperfections form localized states [34]. LPPP forms homogeneous and dense films with a mean interchain distance of about 20 A and ncgligi-... 

Parker [55] studied the IN properties of MEH-PPV sandwiched between various low-and high work-function materials. He proposed a model for such photodiodes, where the charge carriers are transported in a rigid band model. Electrons and holes can tunnel into or leave the polymer when the applied field tilts the polymer bands so that the tunnel barriers can be overcome. It must be noted that a rigid band model is only appropriate for very low intrinsic carrier concentrations in MEH-PPV. Capacitance-voltage measurements for these devices indicated an upper limit for the dark carrier concentration of 1014 cm"3. Further measurements of the built in fields of MEH-PPV sandwiched between metal electrodes are in agreement with the results found by Parker. Electro absorption measurements [56, 57] showed that various metals did not introduce interface states in the single-particle gap of the polymer that pins the Schottky contact. Of course this does not imply that the metal and the polymer do not interact [58, 59] but these interactions do not pin the Schottky barrier. 

---