Cationic polymerization copolymerization

Despite numerous efforts, there is no generally accepted theory explaining the causes of stereoregulation in acryflc and methacryflc anionic polymerizations. Complex formation with the cation of the initiator (146) and enoflzation of the active chain end are among the more popular hypotheses (147). Unlike free-radical polymerizations, copolymerizations between acrylates and methacrylates are not observed in anionic polymerizations however, good copolymerizations within each class are reported (148). 

VEs do not readily enter into copolymerization by simple cationic polymerization techniques instead, they can be mixed randomly or in blocks with the aid of living polymerization methods. This is on account of the differences in reactivity, resulting in significant rate differentials. Consequendy, reactivity ratios must be taken into account if random copolymers, instead of mixtures of homopolymers, are to be obtained by standard cationic polymeriza tion (50,51). Table 5 illustrates this situation for butyl vinyl ether (BVE) copolymerized with other VEs. The rate constants of polymerization (kp) can differ by one or two orders of magnitude, resulting in homopolymerization of each monomer or incorporation of the faster monomer, followed by the slower (assuming no chain transfer). 

Block copolymers have been synthesized on an industrial scale mainly by anionic or cationic polymerization, although monomers for block components are limited to ones capable of the process. Intensive academic and technological interest in radical block copolymerization using macroinitiators is growing. This process can be implemented in plants with easier handling of materials, milder conditions of operation, and a variety of materials to give various kinds of block copolymers to develop a wide application area [1-3]. 

Cationic polymerizations work better when the monomers possess an electron-donating group that stabilizes the intermediate carbocation. For example, isobutylene produces a stable carbocation, and usually copolymerizes with a small amount of isoprene using cationic initiators. The product polymer is a synthetic rubber widely used for tire inner tubes ... 

It was possible to formulate a rule describing how the copolymerization parameters depend on the polarity of the solvent used. This rule is a result of contemplation about the connection between the copolymerization parameters and propagation rate constants during the cationic polymerization as well as about the changes of solvation of educts and activated complexes of the crossed propagation steps in solvents with varied polarity 14 U7). The rule is as follows ... 

Cationic Polymerization and Copolymerization of Isopropenylmetallo-cene Monomers... 

Applying these methodologies monomers such as isobutylene, vinyl ethers, styrene and styrenic derivatives, oxazolines, N-vinyl carbazole, etc. can be efficiently polymerized leading to well-defined structures. Compared to anionic polymerization cationic polymerization requires less demanding experimental conditions and can be applied at room temperature or higher in many cases, and a wide variety of monomers with pendant functional groups can be used. Despite the recent developments in cationic polymerization the method cannot be used with the same success for the synthesis of well-defined complex copolymeric architectures. 

The most industrially significant polymerizations involving the cationic chain growth mechanism are the various polymerizations and copolymerizations of isobutylene. In fact, about 500 million pounds of butyl rubber, a copolymer of isobutylene with small amounts of isoprene, are produced annually in the United States via cationic polymerization [126]. The necessity of using toxic chlorinated hydrocarbon solvents such as dichloromethane or methyl chloride as well as the need to conduct these polymerizations at very low temperatures constitute two major drawbacks to the current industrial method for polymerizing isobutylene which may be solved through the use of C02 as the continuous phase. 

Postpolymerization of difunctional monomers to effect star branching has been successfully applied in cationic polymerization, e.g. in the case of polyisobutylene initiated with 2-chloro-2,4,4,-trimethylpentane/TiCl4. Addition of divinylbenzene leads to star polymers [104], Vinyl ethers, when polymerized with HI/ZnI2 in toluene at — 40°C, can be copolymerized with divinylether... 

Hence, cation-radical copolymerization leads to the formation of a polymer having a lower molecular weight and polydispersity index than the polymer got by cation-radical polymerization— homocyclobutanation. Nevertheless, copolymerization occnrs nnder very mild conditions and is regio-and stereospecihc (Bauld et al. 1998a). This reaction appears to occnr by a step-growth mechanism, rather than the more efficient cation-radical chain mechanism proposed for poly(cyclobutanation). As the authors concluded, the apparent suppression of the chain mechanism is viewed as an inherent problem with the copolymerization format of cation-radical Diels-Alder polymerization. ... 

Among the monomers given in Scheme 1, several possess sufficient nucleophilicity to undergo cationic polymerization (7,8), namely 2-vinyltetrahydrofiiran 1, the alkenylfiirans 2, the furfurylidene ketones 3, 2-furyl oxiranes 4 and the furfuryl vinyl ethers 6, Moreover, furfural and its 5-methyl derivative can act as comonomers in certain cationic copolymerizations. 

Butyl rubber (HR) is widely used for inner tubes and as a sealant. It is produced using the cationic polymerization with the copolymerization of isobutylene in the presence of a small amount (10%) of isoprene. Thus, the random copolymer chain contains a low concentration of widely spaced isolated double bonds, from the isoprene, that are later cross-linked when the butyl rubber is cured. A representation is shown in structure 5.20 where the number of units derived from isobutylene units greatly outnumbers the number of units derived from the isoprene monomer. The steric requirements of the isobutylene-derived units cause the chains to remain apart giving it a low stress to strain value and a low Tg. 

The polymerization of alkyl vinyl ethers is of some commercial importance. The homopolymers, which can be obtained only by cationic polymerization, are useful as plasticizers of other polymers, adhesives, and coatings. (The copolymerization of vinyl ethers with acrylates, vinyl acetate, maleic anhydride, and other monomers is achieved by radical polymerization but not the homopolymerizations of alkyl vinyl ethers.)... 

It has previously been shown that large changes can occur in the rate of a cationic polymerization by using a different solvent and/or different counterion (Sec. 5-2f). The monomer reactivity ratios are also affected by changes in the solvent or counterion. The effects are often complex and difficult to predict since changes in solvent or counterion often result in alterations in the relative amounts of the different types of propagating centers (free ion, ion pair, covalent), each of which may be differently affected by solvent. As many systems do not show an effect as do show an effect of solvent or counterion on r values [Kennedy and Marechal, 1983]. The dramatic effect that solvents can have on monomer reactivity ratios is illustrated by the data in Table 6-10 for isobutylene-p-chlorostyrene. The aluminum bromide-initiated copolymerization shows r — 1.01, r2 = 1.02 in n-hexane but... 

Dreyfuss, P. andM. P. Dreyfuss, Cationic Ring-Opening Polymerization Copolymerization, Chap. 53 in Comprehensive Polymer Science, Vol. 3, G. C. Eastmond, A. Ledwith, S. Russo, and P. Sigwalt, eds., Pergamon Press, London, 1989. 

---