Cartridge size

Column/Cartridge Size (cm) Flow Rate (mL-min 1) Load (g) Injection Volume (mL)... 

Specifications included two 56-gallon FIDPE tanks, a 120 V pump, on/off float switch, rotameter with flow-rate adjustment, two pre-filters, and four filters with refillable Octolig cartridges. Size is 52"x52" with a 68 gallon spill containment. From [28] and reproduced with permission. 

In 1957 the National Coal Board [83] centralized the purchase of permitted explosives in Great Britain and introduced standardization of composition, cartridge sizes etc. 

FIGURE 7.3 A typical ink cartridge (size approximately 3 inches by 11/2 inches)... 

Weight with fuel reported as 2.2 kg for 8 hours. DMFC hybridized with auxiliary slim battery for power peaks up to 72 W. The volume of the prototype dock containing the fuel cell was estimated at 1600 cm3 and the cartridge size,... 

Economic Aspects. Lithium metal is available commercially in ingots, special shapes, shot, and dispersions. Ingots are sold in 0.11-, 0.23-, 0.45-, and 0.91-kg sizes. Special shapes include foil, wire, and rod. Lithium is available in hermetically sealed copper cartridges and in sealed copper tubes for use in treating molten copper and copper-base alloys. Shot is sold in 1.19—4.76 mm (16—4 mesh) sizes. Lithium dispersions (30% in mineral oil) of 10—50-p.m particle size are used primarily in organic chemical reactions. Dispersions in other solvents and of other size fractions can be suppHed. 

Several factors determine cartridge filter collection efficiency including gas filtration velocity, particle characteristics, filter media characteristics, and cleaning mechanism. In general, collection efficiency increases with increasing filtration velocity and particle size. 

Fixed rigid media are available in the forms of disks, pads and cartridges. They are composed of firm, rigid particles set in permanent contact with one another. The media formed have excellent void uniformity, resistance to wear and ease in handling as piece units. Depending on the particle size forming the filter media, temperature, pressure and time for caking, it is possible to manufacture media with... 

Diatomaceous media are available in various shapes. Their relatively uniform particle size establishes high efficiency in retaining solid particles of sizes less than 1/tm as well as certain types of bacteria. Media in the form of plates and cartridges are manufactured by sintering a mixture of diatomite with a binder. 

---