Carboxylates solvent extraction

Typical nonsieve, polar adsorbents are siUca gel and activated alumina. Kquilihrium data have been pubUshed on many systems (11—16,46,47). The order of affinity for various chemical species is saturated hydrocarbons < aromatic hydrocarbons = halogenated hydrocarbons < ethers = esters = ketones < amines = alcohols < carboxylic acids. In general, the selectivities are parallel to those obtained by the use of selective polar solvents in hydrocarbon systems, even the magnitudes are similar. Consequendy, the commercial use of these adsorbents must compete with solvent-extraction techniques. 

Oakmoss. Extracts of oakmoss are extensively used in perfumery to furnisli parts of the notes of the fougnre or chypre type. The first step in the preparation of an oakmoss extract is treatment of the Hchen Evemiaprunastri (L.) Ach., collected from oak trees mainly in southern and central Europe, with a hydrocarbon solvent to obtain a concrete. The concrete is then further processed by solvent extraction or distillation to more usable products, of which absolutes are the most versatile for perfumery use. A definitive analysis of oakmoss volatiles was performed in 1975 (52). The principal constituents of a Yugoslav oakmoss are shown in Table 15 (53). A number of phenoHc compounds are responsible for the total odor impression. Of these, methyl P-orcinol carboxylate is the most characteristic of oakmoss. 

Solvent extraction of metal carboxylates. H. Yamada and M. Tanaka, Adv. Inorg. Chem. Radiochem., 1985, 29,143 (159). 

The analytical method described is also used in following the consumption of peroxybenzoic acid or other peroxy acids during an oxidation reaction it has also been used in determining the conversion of other carboxylic acids to peroxy acids when solvent extraction has been used in the isolation. 

Here we shall confine ourselves to the solvents benzene and 1,2-dichloroethane (class 8). Considering benzene, many investigators have demonstrated since the 1930s the feasibility of titrations in this solvent using both potentiometric and spectrophotometric methods, paying much attention to acid-base indicator reactions under the influence of primary, secondary and tertiary amines. Association of carboxylic acids in benzene was studied at a later stage, mainly on the basis of colligative properties, IR spectroscopy and solvent extraction. ... 

Soldenhoff, K. H. Solvent extraction of copper(II) from chloride solutions by some pyridine carboxylate esters. 

Preston, J. S. du Preez, A. C. Separation of nickel and calcium by solvent extraction using mixtures of carboxylic acids and alkylpyridines. Hydrometallurgy 2000, 58, 239-250. 

Preston, J. S. Solvent extraction of metals by carboxylic acids. Hydrometallurgy 1985, 14, 171-188. 

Burgess, A. Dalton, R. F. Solvent extraction of palladium by pyridine carboxylic esters. Process Metallurgy 1992 pp 1087-1092. 

In ODS, sulfur compounds present in fuels are oxidized to more polar sulfones / sulfoxides to facilitate their removal by solvent extraction or adsorption. Various oxidation systems have been reported in the literature for this transformation. Among these oxidants like hydrogen peroxide (H2O2) and carboxylic acid as catalyst3"5. For the chemical industry, it becomes more and more important to develop cleaner technologies. Solvent extraction processes are used to separate sulfones / sulfoxides from oxidized fuels. These processes required suitable and selective solvents for separation of oxidized sulfur compounds from petroleum feedstocks. 

We, at IIP carried out certain oxidation studies and report the results on oxidation of sulfur compounds present in gas oil using carboxylic acid / H2O2 system. Extent of sulfur removal in gas oil after oxidative desulfurization was monitored by sulfur analysis. Oxidation and solvent extraction reduced sulfur in gas oil from 1.5% to 0.20% in single stage batch extractor. 

Soluble loss of a reagent (extractant, modifier, or diluent) from the solvent phase is an inherent part of the solvent extraction process, since all organic compounds are soluble, to some extent, in water. The conditions prevailing in the system can also promote solubility, which can be a particular problem if the composition and properties of the aqueous phase are inflexible. For example, the solubility of alkylphosphoric acid and carboxylic acid extractants is dependent on temperature, pH, and salt concentration in the aqueous phase. 

Considerable efforts have centered on carrying out the synthesis of polybenzimidazoles at more moderate temperatures. Polymerization of the isophthalic acid or its diphenyl ester have been successfully carried out in polyphosphoric acid or methanesulfonic acid-phosphorous pentoxide at 140-180°C, but the reaction is limited by the very low solubilities (<5%) of the reactants in that solvent. The lower reaction temperature is a consequence of activation of the carboxyl reactant via phosphorylation. Lower reaction temperatures are also achieved in hot molten nonsolvents such as sulfolane and diphenyl sulfone, but the need to remove such solvents by a filtration or solvent extraction is a disadvantage. 

---