Carbonyl compounds salts

If present, these modify the functional group(s), e.g., in 3-amino-2-chloro-2-butenoic acid, ethyl ester, hydrochloride. Modifications are used for anhydrides, esters, and salts of acids, oxides, sulfides, and selenides of ring systems containing P and As, hydrazones, and oximes of carbonyl compounds, salts of amines, etc. 

Combined use of alumina and ultrasound facilitates the first step of the Strecker synthesis imder non-aqueous conditions, starting from carbonyl compounds, salts of amines, and solid potassium cyanide in acetonitrile. The desired product is formed more selectively than when the activation methods are employed separately. 

Reductive coupling of carbonyl compounds to yield olefins is achieved with titanium (0), which is freshly prepared by reduction of titanium(III) salts with LiAIH4 or with potassium. The removal of two carbonyl oxygen atoms is driven by T1O2 formation- Yields are often excellent even with sensitive or highly hindered olefins. (J.E. McMurry, 1974, 1976A,B). 

TABLE 11-24 2-HYDROXYTHIAZOLE DERIVATIVES CARBONYL COMPOUNDS AND SALTS THIOCARBAMFC ACID (158a)... 

Methyl group (Section 2 7) The group —CH3 Mevalonic acid (Section 26 10) An intermediate in the biosyn thesis of steroids from acetyl coenzyme A Micelle (Section 19 5) A sphencal aggregate of species such as carboxylate salts of fatty acids that contain a lipophilic end and a hydrophilic end Micelles containing 50-100 car boxylate salts of fatty acids are soaps Michael addition (Sections 18 13 and 21 9) The conjugate ad dition of a carbanion (usually an enolate) to an a 3 unsatu rated carbonyl compound... 

Alkaline solutions of mononitroparaffins undergo many different reactions when stored for long periods, acidified, or heated. Acidification of solutions of mononitro salts is best effected slowly at 0°C or lower with weak acids or buffered acidic mixtures, such as acetic acid—urea, carbon dioxide, or hydroxyl ammonium chloride. If mineral acids are used under mild conditions, eg, dilute HCl at 0°C, decomposition yields a carbonyl compound and nitrous oxide (Nef reaction). 

In general, peroxomonosulfates have fewer uses in organic chemistry than peroxodisulfates. However, the triple salt is used for oxidizing ketones (qv) to dioxiranes (7) (71,72), which in turn are useful oxidants in organic chemistry. Acetone in water is oxidized by triple salt to dimethyldioxirane, which in turn oxidizes alkenes to epoxides, polycycHc aromatic hydrocarbons to oxides and diones, amines to nitro compounds, sulfides to sulfoxides, phosphines to phosphine oxides, and alkanes to alcohols or carbonyl compounds. 

Phosphonium salts may also be prepared by the addition of tertiary phosphines to carbonyl compounds or olefins (97). 

Carbonyl Compounds. Cychc ketals and acetals (dioxolanes) are produced from reaction of propylene oxide with ketones and aldehydes, respectively. Suitable catalysts iaclude stannic chloride, quaternary ammonium salts, glycol sulphites, and molybdenum acetyl acetonate or naphthenate (89—91). Lactones come from Ph4Sbl-cataly2ed reaction with ketenes (92). 

Methoxydimethylsulfonium and Trimethylsulfoxonium Salts. Alkylating agents react with DMSO at the oxygen. For example, methyl iodide gives methoxydimethylsulfonium iodide (10) as the initial product. The alkoxysulfonium salts are quite reactive and, upon continued heating, either decompose to give carbonyl compounds or rearrange to the more stable trimethylsulfoxonium salts, eg, (11) (eq. 21) (52) ... 

In the case of nicotinamide, the color yield is often low. This problem can be circumvented by either hydrolysis to nicotinic acid or by conversion of the amide to a fluorescent compound. Treatment of nicotinamide with methyl iodide yields the quaternary ammonium salt, /V-methyl nicotinamide (5). Reaction of this compound with acetophenone yields a fluorescent adduct (49). Other carbonyl compounds have also been used (50—54). 

When two moles of a carbonyl compound are used instead of formalin, the mechanism is different (Scheme 58) (70BSF3147). In one example (80CCC2417) the product of the nucleophilic addition of the hydrazine to the pyrazolinium salt (635 R = = Ph, R = R" =... 

A carbonyl group can be protected as a sulfur derivative—for example, a dithio acetal or ketal, 1,3-dithiane, or 1,3-dithiolane—by reaction of the carbonyl compound in the presence of an acid catalyst with a thiol or dithiol. The derivatives are in general cleaved by reaction with Hg(II) salts or oxidation acidic hydrolysis is unsatisfactory. The acyclic derivatives are formed and hydrolyzed much more readily than their cyclic counterparts. Representative examples of formation and cleavage are shown below. 

Acyclic monothio acetals and ketals can be prepared directly from a carbonyl compound or by transketalization, a reaction that does not involve a free carbonyl group, from a 1,3-dithiane or 1,3-dithiolane. They are cleaved by acidic hydrolysis or Hg(II) salts. 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

The unsaturated tetraoxaquaterene (accompanied by linear condensation products) was first synthesized in 18.5% yield by the acid-catalyzed condensation of furan with acetone in the absence of added lithium salts. Other ketones also condensed with furan to give analogous products in 6-12% yield.A corresponding macrocycle was also prepared in 9% yield from pyrrole and cyclohexanone. The macrocyclic ether products have also been obtained by condensation of short linear condensation products having 2, 3, or 4 furan rings with a carbonyl compound. ... 

Fluoroolefins may he prepared by the reaction of Wittig reagents and other pho sphorus-containtng y tides with fluorinated carbonyl compounds. (A discussion of the fluorinated Wittig reagents or other fluonnated phosphorus reagents with nonfluorinated carbonyl compounds is on page 581.) Tnphenylphosphoranes, derived from alkyltriphenyl phosphonium salts, react with 1,1,1-trifluoroacetone [3/] or other trifluoromethyl ketones [32, iJ] (equation 26) (Table 10). 

The close agreement of the three methods supports the contention that protonation at low temperatures first occurs at nitrogen and is followed by a proton shift to give the iminium salt (M). The rate of this rearrangement is dependent on temperature, the nature of the amine, and the nature of the carbonyl compound from which the enamine was made. Even with this complication the availability of iminium salts is not impaired since the protonation reaction is usually carried out at higher temperatures than —70°. Structurally complicated enamines such as trichlorovinyl amine can be readily protonated (17,18). 

A recent adaptation of the procedure employing perchlorate and fluoro-borate salts has been reported by Leonard and Paukstelis (J5). This report includes proof of structure by direct comparison to iminium salts prepared by protonation of enamines. The general reaction reported was that of a ketone or aldehyde with a secondary amine perchlorate to give iminium salts. A large structural variety of carbonyl compounds and several amine... 

The chemical reduction of enamines by hydride again depends upon the prior generation of an imonium salt (111,225). Thus an equivalent of acid, such as perchloric acid, must be added to the enamine in reductions with lithium aluminum hydride. Studies of the steric course (537) of lithium aluminum hydride reductions of imonium salts indicate less stereoselectivity in comparison with the analogous carbonyl compounds, where an equatorial alcohol usually predominates in the reduction products of six-membered ring ketones. 

Perhaps because of inadequate or non-existent back-bonding (p. 923), the only neutral, binary carbonyl so far reported is Ti(CO)g which has been produced by condensation of titanium metal vapour with CO in a matrix of inert gases at 10-15 K, and identified spectroscopically. By contrast, if MCI4 (M = Ti, Zr) in dimethoxy-ethane is reduced with potassium naphthalenide in the presence of a crown ether (to complex the K+) under an atmosphere of CO, [M(CO)g] salts are produced. These not only involve the metals in the exceptionally low formal oxidation state of —2 but are thermally stable up to 200 and 130°C respectively. However, the majority of their carbonyl compounds are stabilized by n-bonded ligands, usually cyclopentadienyl, as in [M(/j5-C5H5)2(CO)2] (Fig. 21.8). 

Common reagents such as lithium diisopropylamide (LDA see Chapter 11, Problem 5) react with carbonyl compounds to yield lithium enolate salts and diisopropylamine, e.g., for reaction with cyclohexanone. 

Active carbonyl compounds such as benzaldehyde attack the electron-rich double bond in DTDAFs to give a dipolar adduct, which immediately undergoes dissociation with formation of two molecules of 146 (64BSF2857 67LA155).Tlie existence of by-products such as benzoin led to the synthetic application of thiazolium salts in the acyloin condensation. For example, replacement of the classic cyanide ion by 3-benzyl-4-methyl-5(/3-hydroxyethyl) thiazolium salts allowed the benzoin-type condensation to take place in nonaqueous solvents (76AGE639) (Scheme 57). 

Generally the desired substituted carbonyl compound 3 is obtained after hydrolytic workup under acidic conditions. With simple alkyl halides an irreversible A-alkylation may take place as a side-reaction to give a quaternary ammonium salt 7 ... 

Upon addition of a base—triethylamine is often used—the sulfonium salt 7 is deprotonated to give a sulfonium ylide 8. The latter decomposes into the carbonyl compound 2 and dimethyl sulfide 9 through /3-elimination via a cyclic transition state. 

---