Butylpyridinium zinc chloride

The electrodeposition of Zn-Co and Zn-Fe alloys in an aqueous bath is classified as an anomalous codeposition [44] because the less noble Zn is preferentially deposited with respect to the more noble metal. This anomaly was attributed to the formation of Zn(OH)+ which adsorbs preferentially on the electrode surface and inhibits the effective deposition of the more noble metal. This anomaly was circumvented by using zinc chloride-n-butylpyridinium chloride ([BP]+C1 / ZnCf ) [27] or [EMIMJ+Ch/ZnCh [28] ionic liquids containing Co(II). The Zn-Co deposits can be varied from Co-rich to Zn-rich by decreasing the deposition potential or increasing the deposition current. XRD measurement reveals the presence of CosZ i in the deposited Zn-Co alloys and that the Co-rich alloys are amorphous and the crystalline nature of the electrodeposits increases as the Zn content of the alloys increases. Addition of propylene carbonate cosolvent to the ionic liquid decreases the melting temperature of the solution and allows the electrodeposition to be performed at a lower temperature. The presence of CoZn alloy is evidenced by the XRD patterns shown in Figure 5.2. 

This is of course not the case when working with room temperature ionic liquid systems. Electrochemical and spectroscopic studies of cobalt, copper, and nickel, have been carried out in the AlClj-butylpyridinium chloride molten salt system. The direct current and pulsed current electrodeposition of Ni-Al alloys has also been shown in acidic AlCls-butylpyridinium chloride ionic liquids. This particular alloy has also been shown to be successful in AlCl3-[C2-mim]Cl ashave Co-Al andCu-Al. Electrochemical techniques can also be used to calculate the diffusion coefficients of metal ions. Table 21.2.6 shows the calculated diffusion coefficients and stokes-Einstein products of cobalt(II), copper(I), nickel(II) and zinc(II) in the 40-60 mol% [Cj-mimlCl-AlClj ionic liquid. 

---

See also in sourсe #XX -- [ ]

---