Bubble column fermenter

The most simple fermenter is the bubble column fermenter (or tower fermenter), which is usually composed of a long cylindrical vessel... 

Slurry Bubble Column Reactors As in the case of gas-liquid slurry agitated reactors, bubble column reactors may also be used when solids are present. Most issues associated with multiphase bubble columns are analogous to the gas-liquid bubble columns. In addition, the gas flow and/or the liquid flow have to be sufficient to maintain the solid phase suspended. In the case of a bubble column fermenter, the sparged oxygen is partly used to grow biomass that serves as the catalyst in the system. Many bubble columns operate in semibatch mode with gas sparged continuously and liquid and catalyst in batch mode. 

Fig. 1 Bubble column fermenter. (View this art in color at WWW. dekker. com.)...

Tubular fluidized and fixed bed fermenters are deviations from the simple bubble column fermenter. Often utilized in producing beer and ciders, these fermenters contain immobilized microorganisms or microbial films on support surfaces. Microbes lost with the product are continuously replenished by adding fresh microorganisms into the packed bed fermenters. In the fixed bed case, slow downward flow of the medium significantly reduces the shear removal (mobilization) of the microbes from the support materials and increases the residence time in the packed column. This is a typical characteristic of the trickle bed fermenter for continuous operation. Readers are referred to the packed bed reactor entry in this volume for a more... 

The submerged process takes 3 to 10 d to complete, depending on the method used. Although very high yields are possible, the productivity is a more important consideration on an industrial basis. It is rare that the process is allowed to continue to the maximum yield. The typical kinetics of citric fermentation in a bubble column is shown in Fig. 7 and the kinetics of high yield (up to 360 g/1) in a fed-batch bubble column fermentation is shown in Fig. 8. 

The most simple fermenter is the bubble column fermenter (or tower fermenter), which is usually a long cylindrical vessel with a sparging device at the bottom as shown in Figures 19.5a and b. The fermenter contents are mixed by rising air bubbles that also provide the oxygen needs... 

Kawagoe, M., Hyakumura, K., Suye, S., Miki, K., Naoe, K., 1997. Application of bubble-column fermenters to submerged culture of schizophyllum-commune for production of L-malic acid. Journal of Fermentation and Bioengineering 84 (4), 333-336. 

Hydrodynamics and mass transfer in bubble columns are dependent on the bubble size and the bubble velocity. As the bubble is released from the sparger, it comes into contact with media and microorganisms in the column. In sugar fermentation, glucose is converted to ethanol and carbon dioxide ... 

The term three-phase fluidization, in this chapter, is taken as a system consisting of a gas, liquid, and solid phase, wherein the solid phase is in a non-stationary state, and includes three-phase slurry bubble columns, three-phase fluidized beds, and three-phase flotation columns, but excludes three-phase fixed bed systems. The individual phases in three-phase fluidization systems can be reactants, products, catalysts, or inert. For example, in the hydrotreating of light gas oils, the solid phase is catalyst, and the liquid and gas phases are either reactants or products in the bleaching of paper pulp, the solid phase is both reactant and product, and the gas phase is a reactant while the liquid phase is inert in anaerobic fermentation, the gas phase results from the biological activity, the liquid phase is product, and the solid is either a biological carrier or the microorganism itself. 

The 1980 s and the early 1990 s have seen the blossoming development of the biotechnology field. Three-phase fluidized bed bioreactors have become an essential element in the commercialization of processes to yield products and treat wastewater via biological mechanisms. Fluidized bed bioreactors have been applied in the areas of wastewater treatment, discussed previously, fermentation, and cell culture. The large scale application of three-phase fluidized bed or slurry bubble column fermen-tors are represented by ethanol production in a 10,000 liter fermentor (Samejima et al., 1984), penicillin production in a 200 liter fermentor (Endo et al., 1986), and the production of monoclonal antibodies in a 1,000 liter slurry bubble column bioreactor (Birch et al., 1985). Fan (1989) provides a complete review of biological applications of three-phase fluidized beds up to 1989. Part II of this chapter covers the recent developments in three-phase fluidized bed bioreactor technology. 

So far, we have considered only mass transfer within a single phase - that is, mass transfer between fluids and solid surfaces. For gas absorption and desorption, in which mass transfer takes place between a gas and a liquid, packed columns are extensively used, while bubble columns and sparged stirred vessels are used mainly for gas-liquid reactions or aerobic fermentation. As the latter types of equipment are discussed fully in Chapter 7, we shall, at this point, describe only the performance of packed columns. 

Two major types of fermentors are widely used in industry. The stirred tank, with or without aeration (e.g., air sparging) is most widely used for aerobic and anaerobic fermentations, respectively. The bubble column (tower fermentor) and its modifications, such as airlifts, are used only for aerobic fermentations, especially of a large scale. The important operating variables of the sparged (aerated)... 

Fermentation broths are suspensions of microbial cells in a culture media. Although we need not consider the enhancement factor E for respiration reactions (as noted above), the physical presence per se of microbial cells in the broth will affect the k a values in bubbling-type fermentors. The rates of oxygen absorption into aqueous suspensions of sterilized yeast cells were measured in (i) an unaerated stirred tank with a known free gas-liquid interfacial area (ii) a bubble column and (iii) an aerated stirred tank [6]. Data acquired with scheme (i) showed that the A l values were only minimally affected by the presence of cells, whereas for schemes (ii) and (iii), the gas holdup and k a values were decreased somewhat with increasing cell concentrations, because of smaller a due to increased bubble sizes. 

Aerated stirred tanks, bubble columns, and airlifts are usually used for aerobic fermentations. One criterion of scaling-up aerated stirred tank fermentor is k a, approximate values of which can be estimated by Equation 7.36a or b. For the turbulent range, a general correlation for k a in aerated stirred fermentors is of the following type [3] ... 

Fig. 6.21 Column fermenters (a) bubble column, (b) tapered bubble column, (c) sieve-tray bubble column, (d) sieve-tray column with external pumping, and (e) packed-bed column with external pumping.

Aerobic fermentations are carried out in bubble columns when scale advantage is required, and the cells can be considered a third phase, making these multiphase reactors. 

FIG. 19-32 Some examples of fermenters. (1) Conventional batch fermenter. (2) Air lift fermenters (a) Concentric cylinder or bubble column with draft tube (b) external recycle. (3) Rotating fermenter. (4) Horizontal fermenter. (5) Deep-shaft fermenter. (6) Flash-pot fermenter. 

While current applications include hydrogenation and fermentation, slurry bubble columns have recently been the subject of renewed study for use in two areas of hetergeneous catalysis, SRC coal liquefaction and the Fischer-Tropsch reaction to produce hydrocarbons from synthesis gas. 

Bubble column reactors (BCR) are widely used in chemical process industries to carry out gas-liquid and gas--liquid-solid reactions, the solid suspended in the liquid phase being most frequently a finely divided catalyst (slurry reactor). The main advantages of BCR are their simple construction, the absence of any moving parts, ease of maintenance, good mass transfer and excellent heat transfer properties. These favorable properties have lead to their application in various fields production of various chemical intermediates, petroleum engineering, Fischer-Tropsch synthesis, fermentations and waste water treatment. 

---