BTU, 1.28

British thermal unit (Btu) The most commonly used industrial heal unit the amount of heat required to raise 1 lb of water through UF under specified conditions. Since the specific heat of water varies, particularly with temperature, the actual value of Btu is dependent on the conditions chosen as stan-... 

Measured in MJ/m or Btu/ft, the Wobbe Index has an advantage over the calorific value of a gas (the heating value per unit volume or weight), which varies with the density of the gas. The Wobbe Index Is commonly specified in gas contracts as a guarantee of product quality. A customer usually requires a product whose Wobbe Index lies within a narrow range, since a burner will need adjustment to a different fuel air ratio if the fuel quality varies significantly. A sudden increase in heating value of the feed can cause a flame-out. 

If solvent recovery is maximized by minimizing the temperature approach, the overall heat-transfer coefficient in the condenser will be reduced. This is due to the fact that a large fraction of the heat transfer area is now utilized for cooling a gas rather than condensing a Hquid. Depending on the desired temperature approach the overall heat-transfer coefficients in vent condensers usually range between 85 and 170 W/m K (ca 15 and 30 Btu/h-ft. °F). 

Coa.1 Reserves. As indicated in Table 2, coal is more abundant than oil and gas worldwide. Moreover, the U.S. has more coal than other nations U.S. reserves amount to about 270 biUion metric tons, equivalent to about 11 x 10 MJ (1 x 10 ° BTU = 6600 quads), a large number compared to the total transportation energy use of about 3.5 x lO " MJ (21 quads) per year (11). Methanol produced from U.S. coal would obviously provide better energy security benefits than methanol produced from imported natural gas. At present however, the costs of producing methanol from coal are far higher than the costs of producing methanol from natural gas. 

---