Bromine index naphtha

An indication of naphtha composition may also be obtained from the determination of aniline point (ASTM D-1012, IP 2), freezing point (ASTM D-852, ASTM D-1015, ASTM D-1493) (Fig. 4.2), cloud point (ASTM D-2500) (Fig. 4.3), and solidification point (ASTM D-1493). And, although refinery treatment should ensure no alkalinity and acidity (ASTM D-847, ASTM D-1093, ASTM D-1613, ASTM D-2896, IP 1) and no olefins present, the relevant tests using bromine number (ASTM D-875, ASTM D-1159, IP 130), bromine index (ASTM D-2710), and flame ionization absorption (ASTM D-1319, IP 156) are necessary to ensure low levels (at the maximum) of hydrogen sulfide (ASTM D-853) as well as the sulfur compounds in general (ASTM D-130, ASTM D-849, ASTM D-1266, ASTM D-2324, ASTM D-3120, ASTM D-4045, ASTM D-6212, IP 107, IP 154) and especially corrosive sulfur compounds such as are determined by the Doctor test method (ASTM D-4952, IP 30). 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

---