Boron reduction

The microwave synthesis of optically pure imines for subsequent diastereoselective boronate reduction at room temperature has been described50. The reduction of (1-azabuta-l,3-diene)tricarbonyliron(0) complexes and their free ligands using sodium... 

Thermal and photochemical reactions Nucleophilic addition on boron Reduction Ring expansion... 

Snbseqnent reactions of atomic hydrogen lead to further rednction of boron chlorides as well as to the formation of boron hydrochlorides. This total boron reduction process can be performed on a hot wire or using hot walls of a pipe reactor (Carleton et al., 1970). Boron formation takes place in this approach at temperatmes of 1100-1700 K in the form of dense deposits on the walls, which is not convenient for further use. The productivity and efficiency of such a thermal process are also low. Performing the process in thermal plasma of RF-ICP discharges results in more effective production of boron in the form of fine powder (Hamblym, Reuben, Thompson, 1972 Cuelleron Crusiat, 1974). 

Rates for rod withdrawal and boron reduction are specified in such a way that the start-up rate is less than one decade per minute. 

Boron reduction is currently possible by applying one or more of the following treatment approaches ... 

Boron forms a whole series of hydrides. The simplest of these is diborane, BjH. It may be prepared by the reduction of boron trichloride in ether by lithium aluminium hydride. This is a general method for the preparation of non-metallic hydrides. 

Asymmetric Reduction of Unsymmetrical Ketones Using Chiral Boron Reagents Review Synthesis 1992, 605. 

Boron exists naturally as 19.78% lOB isotope and 80.22% IIB isotope. High-purity crystalline boron may be prepared by the vapor phase reduction of boron trichloride or tribromide with hydrogen on electrically heated filaments. The impure or amorphous, boron, a brownish-black powder, can be obtained by heating the trioxide with magnesium powder. 

Boron trichloride, usually in conjunction with an additional Lewis acid, effects o-chloroacetylation of anilines. The resulting products are converted to indoles by reduction with NaBH4.[l], The strength of the Lewis acid required depends upon the substitution pattern on the ring. With ER substituents no additional... 

AHylestrenol (37) is prepared from (32), an intermediate in the synthesis of norethindrone. Treatment of (32) with ethanedithiol and catalytic boron trifluoride provides a thioketal. Reduction with sodium in Hquid ammonia results in the desired reductive elimination of the thioketal along with reduction of the 17-keto group. Oxidation of this alcohol with chromic acid in acetone followed by addition of aHyl magnesium bromide, completes the synthesis... 

A number of less hindered monoalkylboranes is available by indirect methods, eg, by treatment of a thexylborane—amine complex with an olefin (69), the reduction of monohalogenoboranes or esters of boronic acids with metal hydrides (70—72), the redistribution of dialkylboranes with borane (64) or the displacement of an alkene from a dialkylborane by the addition of a tertiary amine (73). To avoid redistribution, monoalkylboranes are best used /V situ or freshly prepared. However, they can be stored as monoalkylborohydrides or complexes with tertiary amines. The free monoalkylboranes can be hberated from these derivatives when required (69,74—76). Methylborane, a remarkably unhindered monoalkylborane, exhibits extraordinary hydroboration characteristics. It hydroborates hindered and even unhindered olefins to give sequentially alkylmethyl- and dialkylmethylboranes (77—80). 

It is easy to reduce anhydrous rare-earth hatides to the metal by reaction of mote electropositive metals such as calcium, lithium, sodium, potassium, and aluminum. Electrolytic reduction is an alternative in the production of the light lanthanide metals, including didymium, a Nd—Pt mixture. The rare-earth metals have a great affinity for oxygen, sulfur, nitrogen, carbon, silicon, boron, phosphoms, and hydrogen at elevated temperature and remove these elements from most other metals. 

MetaUic impurities ate also detrimental in appHcations where magnesium is used as a reductant such as in the KroU process. The produced metal can be contaminated with boron rendering it useless in some nuclear appHcations. 

Other Metals. AH the sodium metal produced comes from electrolysis of sodium chloride melts in Downs ceUs. The ceU consists of a cylindrical steel cathode separated from the graphite anode by a perforated steel diaphragm. Lithium is also produced by electrolysis of the chloride in a process similar to that used for sodium. The other alkaH and alkaHne-earth metals can be electrowon from molten chlorides, but thermochemical reduction is preferred commercially. The rare earths can also be electrowon but only the mixture known as mischmetal is prepared in tonnage quantity by electrochemical means. In addition, beryIHum and boron are produced by electrolysis on a commercial scale in the order of a few hundred t/yr. Processes have been developed for electrowinning titanium, tantalum, and niobium from molten salts. These metals, however, are obtained as a powdery deposit which is not easily separated from the electrolyte so that further purification is required. 

The reactor coolant pH is controlled using lithium-7 hydroxide [72255-97-17, LiOH. Reactor coolant pH at 300°C, as a function of boric acid and lithium hydroxide concentrations, is shown in Figure 3 (4). A pure boric acid solution is only slightly more acidic than pure water, 5.6 at 300°C, because of the relatively low ionisation of boric acid at operating primary temperatures (see Boron COMPOUNDS). Thus the presence of lithium hydroxide, which has a much higher ionisation, increases the pH ca 1—2 units above that of pure water at operating temperatures. This leads to a reduction in corrosion rates of system materials (see Hydrogen-ION activity). 

The reduction of alkyl-substituted siUcon and tin peroxides with sodium sulfite and triphenylphosphine has been reported (33,93). Alkyl-substituted aluminum, boron, cadmium, germanium, siUcon, and tin peroxides undergo oxygen-to-metal rearrangements (33,43,94), eg, equations 22 and 23. 

A noteworthy development is the use of KH for complexing alkylboranes and alkoxyboranes to form various boron hydrides used as reducing agents in the pharmaceutical industry. Potassium tri-j -butylborohydride [54575-50-7] KB(CH(CH2)C2H )2H, and potassium trisiamylborohydride [67966-25-0] KB(CH(CH2)CH(CH2)2)3H, are usefiil for the stereoselective reduction of ketones (66) and for the conjugate reduction and alkylation of a,P-unsaturated ketones (67). 

Electroless Electrolytic Plating. In electroless or autocatalytic plating, no external voltage/current source is required (21). The voltage/current is suppHed by the chemical reduction of an agent at the deposit surface. The reduction reaction must be catalyzed, and often boron or phosphoms is used as the catalyst. Materials that are commonly deposited by electroless plating (qv) are Ni, Cu, Au, Pd, Pt, Ag, Co, and Ni—Fe (permalloy). In order to initiate the electroless deposition process, a catalyst must be present on the surface. A common catalyst for electroless nickel is tin. Often an accelerator is needed to remove the protective coat on the catalysis and start the reaction. 

Research-grade material may be prepared by reaction of pelleted mixtures of titanium dioxide and boron at 1700°C in a vacuum furnace. Under these conditions, the oxygen is eliminated as a volatile boron oxide (17). Technical grade (purity > 98%) material may be made by the carbothermal reduction of titanium dioxide in the presence of boron or boron carbide. The endothermic reaction is carried out by heating briquettes made from a mixture of the reactants in electric furnaces at 2000°C (11,18,19). 

---