Boring machine

Gearboxes Boring machines Roofing manufacturing lines... 

Small discs (about 15 mm in diameter) were cut from the agar using a cork-boring machine. 

Venting can also be provided within the mold cavity by means of inserts equiped with vent slots, porous sintered plugs, or by holes with a diameter not greater than 0.2 mm. Such holes are machined only to a shallow depth and are relieved by a much larger bore machined from the back of the mold. 

Boring machines are similar in construction to milling machines except they are generally more massive and built lower to the floor, use different tooling, and feed differently along the axis of the spindle. Boring machines are typically located in very clean, climate controlled environments and are massive for extra rigidity and vibration... 

The base of the jig boring machine supports a saddle that moves in and out from the operator to the column. A table moves right or left on the saddle to complement the saddle movement. A massive column supports the spindle housing, which adjusts to the work location by moving up and down the column ways. The spindle moves inside a quill that is supported by the housing or spindlehead. 

Barrel-boring machine. Barrel-turning lathe. Straightening machine. 

Turning (external) Surface of revolution (cylindrical) Fath, boring machine Single point... 

First scientific study of metal cutting was carried out by Frederic W. Taylor (1856-1915). He was employed in Midvale Steel Company. In 1886, he started experiments on metal cutting on a boring machine. He was trying to find out optimum cutting conditions and was encouraged by the president of Midvale, William Sellers. In 1889, Taylor left Midvale, but continued his project while... 

Ramoni, M Anagnostou, G. 2010. Tunnel boring machines under squeezing conditions, Tunnelling and Underground Space Technology 25 139-157. 

Shang, Y.J., Xue, J.H., Wang, S.J. et al. 2004. A case history of Tunnel Boring Machine jamming in an interlayer shear zone at the Yellow River Diversion Project in China, Engineering Geology 71 199-211. 

After the construction of the halls was finished the tunnel between two neighbouring halls was made with a boring machine. The complete tolerance for the tunnel from one end to the other, a distance of 1.5 km, was 10 cm. The tolerance for the survey was assumed as 4 cm. This means a standard deviation of 1 cm to 2 cm. To control the boring machine, supports were mounted at intervalls of 80 m in the tunnel. The coordinates of the supports were determined by a tunnel traverse with overlapping directions connecting the four reference points in the hall (Fig. 3). 

From the shaft bottom plate in 48 m d th the 6 assembly chambers for the tunnel boring machines - for the landwards heading of approx. 3.3 km to the surface and the 15.8 km heading seawards to the breakthrough point underneath the Channel - may be recognized. 

---