Benzophenone-4-propionic acid

C25H27CIO3 /O/Oy-i -J) see Trenbolone acetate ( )-2-chioro-3-[4-[(6-hydroxy-2,5,7,8-tetramethyl-chroman-2-yl)incthoxy]phenyl]propionic acid (C23H27C10 97322-69-5) sec Troglitazone 4 -chloro-2 (24midazoUn-2-yl)benzophenone (Ci HjiClNjO 22590-J7-6) see Mazindo ... 

Cane sugar Glucose Phenol o-Nitrophenol Picric acid a-Naphthol Formaldehyde Acetaldehyde Benzaldehyde Acetone -Benzophenone Formic acid Acetic acid Propionic acid Benzoic acid Oxalic acid Succinic acid Tartaric acid Urea... 

It is important to recognize that additives suitable for one type of resin may have detrimental effects on another and/or on their additives. Furthermore, the stabilizing systems of one polymer type may neutralize the system of another polymer. For example, to stabilize blends comprising 55-75 wt% PO, 5-25 wt% PS, 5-15 wt% PVC, and 0-10 wt% of other thermoplastics, 0.1-0.5 wt% of a stabilizer mixture was added. The mixmre comprised a sterically hindered phenol [e.g., pentaerythritol ester], and a phosphite [e.g., tris(2,4-di-tert-butyl phenyl)phosphite] at a ratio of 5 1 to 1 5. For other compositions of PCW, different stabilizers, viz., thio-propionic acid, benzophenones, oxahdes, benzotriazoles, HALS, and/or CaO may have to be used [Pauquet et al., 1994]. 

Commingled polyolefins are re-stabilized using about 0.06 wt% of a hindered phenol antioxidant, and about 0.09 wt% phosphite. Acids present in the mixture should be neutralized by addition of a sufficient amount of CalOH). For other compositions of PCW, other stabilizers, viz., thio-propionic acid, benzophenones, oxalides, benzo-triazoles, or sterically hindered amines may have to be used [Pauquet et al., 1993]. 

Carbonylbis 1,3-isobenzofurandione 4,4 -Carbonylbis (phthalic anhydride). See 3,3, 4,4-Benzophenone tetracarboxylic dianhydride Carbonyl diamide Carbonyidiamine. See Urea 1,3-Carbonyi dioxypropane. See Propylene carbonate 4,4 -Carbonyidiphtnaiic acid anhydride 4,4 -Carbonyldiphthalk anhydride. See 3,3, 4,4-Benzophenone tetracarboxylic dianhydride Carborundeum Carborundum. See Silicon carbide Carbothialdine. See3,5-Dimethyl tetrahydro-2-H,1,3,5-thiadiazone-2-thione Carboxyaniline 2-Carboxyaniline o-Carboxyaniline. SeeAnthranilic acid Carboxybenzene. See Benzoic acid Carboxyethane. See Propionic acid... 

Materials. 4-vinylbenzyl chloride, 4-(dimethylamino)pyridine (DMAP), 2,2-bis(hydroxymethyl) prpionic acid (bisMPA), benzaldehyde dimethyl acetal, p-toluene sulfonic acid-monohydride ( TSAOH), and n-butyl lithium (2.5M) were purchased from Sigma-Aldrich. Benzylidene-2,2-bis(oxymethyl)propionic acid and its anhydride were prepared following a literature procedure (2SJ. Dichloromethane (DCM) was distilled under nitrogen from calcium hydride immediately prior to use. Tetrahydrofuran (THF) was distilled under nitrogen from sodium/benzophenone immediately prior to use. All other reagents were commercially obtained and used without further purification. 

SPECTRA E-I Butyl acetate Butyramide Isobutylamine Laurie acid Sodium propionate SPECTRA N-R Aniline Azobenzene Benzophenone oxime Benzylamine... 

Amyl propionate Azelaic acid Benzophenone-11 Benzyl acetate L-Camphor Carnauba synthetic Cellulose acetate ... 

In this connection, O Brien and co-workers [13,14] carried out detailed studies of the use of the mathematical models for the prediction of migration of additives from food contact polymers and compared these predictions with experimental data. In their first paper [13] experimental migration data was obtained and used to evaluate two Fickian-based models for predicting the migration of four additives from high-density polyethylene (HDPE) into olive oil. Additives were a benzophenone UV stabiliser (2-hydroxy-4-N-octyloxy benzophenone), an antioxidant and a benzothiazole stabiliser, a colorant carrier (adipic acid, bis(2-ethylhexyl) ester, a propionate antioxidant (octadecyl-3-(3,5-di-ter -butyl-4-hydroxyphenyl)propionate) and a benzotriazole UV stabiliser (2-(2-hydroxy-3-tert-butyl-5-methylphenyl)-5-chlorobenzotriazole). 

---