Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Bending strain

Fig. 3. Bending stress versus bending strain for typical carbon, glass, and aramid fibers. To convert MPa to psi, multiply by 145. Fig. 3. Bending stress versus bending strain for typical carbon, glass, and aramid fibers. To convert MPa to psi, multiply by 145.
The bending strains in the global directions are given generally by... [Pg.201]

Show that with two gages conveniently placed on the sub the bending strain compensates. [Pg.966]

The P-i concept can also be used to collapse the results of a number of dynamic response calculations for structural elements into compact dimensionless design curves. A number of illustrations are given in Ref. 15, with one for blast-loaded beams with various boundary conditions appearing in Fig. 20. These curves give predictions of maximum dynamic bending strains and displacements for beams with a variety of boundary conditions. Details appear in Ref. 15, so we do not try to define all parameters here. [Pg.23]

That bond-bending strain is not confined to three-membered rings is evident from charge density studies on cyclobutane (Stein et al. 1992), cyclobutadiene... [Pg.279]

In addition to this important stereoelectronic effect, it is less widely recognized that the 6-endo transition state (3) is believed to have a higher degree of torsional and/or bending strain that its S-exo counterpart (l).11 This added strain may be due to deformations in the chain, which are necessary to... [Pg.782]

The two computational models differ on this point. The Beckwith model (ref. 6) indicates increased bending and torsional strain in the 6-endo TS. The Houk model (ref. 7) indicates increased bending strain only, and states this strain is due in part to the bending of the allylic carbon out of the alkene plane to accommodate a better angle of attack. [Pg.827]

Figure 11 is a graph of initial bending strain vs. number of cycles-to-failure resulting from flexure fatigue tests for two of the recycled mixes... [Pg.217]

Figure II. Comparison of initial bending strain for sulfur-recycled, conventional recycled, and conventional asphaltic concrete mixtures... Figure II. Comparison of initial bending strain for sulfur-recycled, conventional recycled, and conventional asphaltic concrete mixtures...
Table 12.8 Effect of various solvents on HIPS samples are exposed for lOmin under a constant bending strain and then the samples tensile elongation is compared to a control results are reported as percentage retention of tensile elongation... Table 12.8 Effect of various solvents on HIPS samples are exposed for lOmin under a constant bending strain and then the samples tensile elongation is compared to a control results are reported as percentage retention of tensile elongation...
Figure 10. Bending strain characteristics of single-core and 36-, 61-, and 1296-filamentary wires. Figure 10. Bending strain characteristics of single-core and 36-, 61-, and 1296-filamentary wires.
The deformation is given in terms of axial strain and bending strain which are the mean value of the strains in loading direction and in proportion to the curvature of the layered structure, respectively. [Pg.78]

Figure 4. Predicted axial strain response for plane stress (PST) calculations with internally full and reduced constraint and predicted axial and bending strain response for interally fully constraint generalized plane strain (GPE) calculations by the incremental Mori-Tanaka approach... Figure 4. Predicted axial strain response for plane stress (PST) calculations with internally full and reduced constraint and predicted axial and bending strain response for interally fully constraint generalized plane strain (GPE) calculations by the incremental Mori-Tanaka approach...

See other pages where Bending strain is mentioned: [Pg.88]    [Pg.341]    [Pg.5]    [Pg.218]    [Pg.244]    [Pg.244]    [Pg.71]    [Pg.77]    [Pg.798]    [Pg.401]    [Pg.88]    [Pg.183]    [Pg.183]    [Pg.184]    [Pg.184]    [Pg.186]    [Pg.188]    [Pg.191]    [Pg.77]    [Pg.843]    [Pg.435]    [Pg.474]    [Pg.341]    [Pg.926]    [Pg.488]    [Pg.138]    [Pg.269]    [Pg.40]    [Pg.843]    [Pg.78]    [Pg.79]    [Pg.80]    [Pg.268]   
See also in sourсe #XX -- [ Pg.400 ]




SEARCH



© 2024 chempedia.info