Ball milling, ceramic slurry

Fig. 3.21 Relative density versus sintering temperature for the Zr02-doped Ho Y203 ceramics derived from the powders ball milled with different slurry concentrations. Reproduced with permission from [101]. Cop3uight 2015, Elsevier...

Ceramic-glass composite materials may be used to economically fabricate very complex multilayer interconnection structures. The materials in powder form are mixed with an organic binder, a plasticizer, and a solvent and formed into a slurry by ball or roll milling. The slurry is forced under a doctor blade and dried to form a thin sheet, referred to as green tape or greensheet. Further processing depends on the type of material. There are three basic classes of materials high temperature cofired ceramic (HTCC), low temperature cofired ceramic (LTCC), and aluminum nitride. 

The white cast irons and their low alloys have good abrasion resistance properties [2,3]. White cast irons are used for grinding balls, segments for mill liners and slurry pumps. In the ceramic industry they are used for muller tyres and augers in the pulp and paper industry for attrition mill plates and chip feeders and in the paint industry for balls for grinding pigments. 

---