Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Automatic Processing with Single Files

Load the C FID of peracetylated glucose D NMRDATA GLUCOSE 1D C GC 001001.FID and set up a processing job. In the time domain select DC [Pg.212]

Correction, Window Function (Exponential LB = 1.0 Hz) and FT. In the frequency domain select Phase Correction (6th Order), Peak Picking (positive Peaks only X Range whole Spectrum) of the whole region. Save Spectrum (set Processing Number Increment = 1) and Plot Spectrum (set the plot parameters according to your preferences). Execute the automatic processing and if you are satisfied with the result, store this job for processing 1D C raw data as C.JOB. [Pg.212]


CAM tools are CAD systems tailored to the needs of the fabrication process.The output of the PCB design process is a set of CAD files that describes each artwork layer of a PCB, the sUk screen requirements, drilling requirements, and netlist information. This information must be modified before it can be used to build a PCB. For example, if a fabricator needs to build several copies of a PCB on a single panel, the fabricator will need to add specialized tooling patterns to the artwork and alter trace widths in order to compensate for etching. Initially, these operations were done manually with a high potential for error and significant labor costs. CAM stations or tools allow the fabricator to do all of these operations automatically and rapidly. [Pg.314]


See other pages where Automatic Processing with Single Files is mentioned: [Pg.211]    [Pg.211]    [Pg.77]    [Pg.209]    [Pg.168]    [Pg.269]    [Pg.6]    [Pg.269]    [Pg.472]    [Pg.258]    [Pg.419]    [Pg.237]    [Pg.576]    [Pg.426]    [Pg.754]    [Pg.237]    [Pg.906]   


SEARCH



Automatic Processes

Automatic processing

Processing automatic, single files

© 2024 chempedia.info