Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Atomization energy requirement

The Russian Federation Law on the Use of Atomic Energy requires that during the design and before the construction of a nuclear installation, a decommissioning plan for this installation be put in place. [Pg.21]

The energy required to remove an electron from a free atom or ion in the gaseous state. [Pg.220]

If a beam of monoenergetic ions of mass A/, is elastically scattered at an angle 6 by surface atoms of mass Mg, conservation of momentum and energy requires that... [Pg.308]

Consider first the formation of cations by electron loss. Here the important energy quantity is the ionisation energy. As we have seen (p. 15). the first ionisation energy is the energy required to remove an electron from an atom, i.e. the energy for the process... [Pg.29]

The energy required to break the bond between two covalently bonded atoms is called the bond dissociation energy . In polyatomic molecules this quantity varies with environment. For example, ammonia has three N—H bond dissociation energies ... [Pg.47]

Were we to simply add the ionization energy of sodium (496 kJ/mol) and the electron affin ity of chlorine (—349 kJ/mol) we would conclude that the overall process is endothermic with AH° = +147 kJ/mol The energy liberated by adding an electron to chlorine is msuf ficient to override the energy required to remove an electron from sodium This analysis however fails to consider the force of attraction between the oppositely charged ions Na" and Cl which exceeds 500 kJ/mol and is more than sufficient to make the overall process exothermic Attractive forces between oppositely charged particles are termed electrostatic, or coulombic, attractions and are what we mean by an ionic bond between two atoms... [Pg.12]

Some of the evidence indicating that alkyl substituents stabilize free radicals comes from bond energies The strength of a bond is measured by the energy required to break It A covalent bond can be broken m two ways In a homolytic cleavage a bond between two atoms is broken so that each of them retains one of the electrons m the bond... [Pg.169]

Isomeric alkenes may be either constitutional isomers or stereoisomers There is a sizable barrier to rotation about a carbon-carbon double bond which corresponds to the energy required to break the rr component of the double bond Stereoisomeric alkenes are configurationally stable under normal conditions The configurations of stereoisomeric alkenes are described according to two notational systems One system adds the prefix CIS to the name of the alkene when similar substituents are on the same side of the double bond and the prefix trans when they are on opposite sides The other ranks substituents according to a system of rules based on atomic number The prefix Z is used for alkenes that have higher ranked substituents on the same side of the double bond the prefix E is used when higher ranked substituents are on opposite sides... [Pg.220]

The minimum amount of energy required to remove the least strongly bound electron from a gaseous atom (or ion) is called the ionization energy and is expressed in MJ moE. Remember that 96.485 kJ = 1.000 eV = 23.0605 kcal. In Table 4.2 the successive stages of ionization are indicated by the heading of each column I denotes first spectra arising from a neutral atom viz.,... [Pg.281]

Atomization and Excitation Atomic emission requires a means for converting an analyte in solid, liquid, or solution form to a free gaseous atom. The same source of thermal energy usually serves as the excitation source. The most common methods are flames and plasmas, both of which are useful for liquid or solution samples. Solid samples may be analyzed by dissolving in solution and using a flame or plasma atomizer. [Pg.435]

To examine the soUd as it approaches equUibrium (atom energies of 0.025 eV) requires molecular dynamic simulations. Molecular dynamic (MD) simulations foUow the spatial and temporal evolution of atoms in a cascade as the atoms regain thermal equiUbrium in about 10 ps. By use of MD, one can foUow the physical and chemical effects that induence the final cascade state. Molecular dynamics have been used to study a variety of cascade phenomena. These include defect evolution, recombination dynamics, Hquid-like core effects, and final defect states. MD programs have also been used to model sputtering processes. [Pg.397]

Whereas new appHcations of lithium compounds were developed, commercial growth was slow. In 1953 worldwide sales of lithium products, expressed as lithium carbonate, were only ca 1000 metric tons (2). In 1954 the U.S. lithium industry underwent a sudden, very large expansion when the U.S. Atomic Energy Commission required large amounts of lithium hydroxide [1310-65-2] for its nuclear weapons program (see Nuclearreactors). Three domestic producers built 4500-t/yr plants to meet contract commitments with the U.S. government. When these government contracts ended in 1960, capacity exceeded demand and several operations were discontinued. [Pg.220]

Some of the gas atoms or molecules must be stripped of one or more of their electrons. The energy required to accomplish this, called the ionisation potential, is measured in electron volts. In MHD flows of interest, the required energy is suppHed by heating the gas. Thus the ionisation process is referred to as thermal ionisation. [Pg.418]

Thermal decomposition of spent acids, eg, sulfuric acid, is required as an intermediate step at temperatures sufficientiy high to completely consume the organic contaminants by combustion temperatures above 1000°C are required. Concentrated acid can be made from the sulfur oxides. Spent acid is sprayed into a vertical combustion chamber, where the energy required to heat and vaporize the feed and support these endothermic reactions is suppHed by complete combustion of fuel oil plus added sulfur, if further acid production is desired. High feed rates of up to 30 t/d of uniform spent acid droplets are attained with a single rotary atomizer and decomposition rates of ca 400 t/d are possible (98). [Pg.525]

The preparation of semiconductors by thermal decomposition would appear to be impossible because of the high amount of energy required to break all of the metal-carbon bonds before the atomic species could be formed. However, the thermal method is successful because the reaction to form free methyl radicals, which combine to form ethane, lowers the energetic requirements for the formahon of gallium, for example, according to the equation... [Pg.70]


See other pages where Atomization energy requirement is mentioned: [Pg.31]    [Pg.31]    [Pg.29]    [Pg.343]    [Pg.358]    [Pg.31]    [Pg.31]    [Pg.29]    [Pg.343]    [Pg.358]    [Pg.178]    [Pg.918]    [Pg.870]    [Pg.2204]    [Pg.2913]    [Pg.60]    [Pg.139]    [Pg.139]    [Pg.228]    [Pg.199]    [Pg.12]    [Pg.40]    [Pg.200]    [Pg.296]    [Pg.384]    [Pg.184]    [Pg.228]    [Pg.499]    [Pg.447]    [Pg.466]    [Pg.306]    [Pg.395]    [Pg.13]    [Pg.1409]    [Pg.1439]    [Pg.1488]    [Pg.1605]    [Pg.1606]    [Pg.2133]    [Pg.64]    [Pg.72]   
See also in sourсe #XX -- [ Pg.317 ]




SEARCH



Energy requirements

© 2024 chempedia.info