Assisted removal amines

Assisted removal, 2-3 of carbamates, to form amines, 341-345 of chloroacetamides, to form amines, 352 of substituted amides, to form amines, 356-357... 

In petroleum and oxygenate finish removers, the major ingredient is normally acetone, methyl ethyl ketone [78-93-3], or toluene. Cosolvents include methanol, / -butanol [71-36-3], j -butyl alcohol [78-92-2], or xylene [1330-20-7]. Sodium hydroxide or amines are used to activate the remover. Paraffin wax is used as an evaporation retarder though its effectiveness is limited because it is highly soluble in the petroleum solvents. CeUulose thickeners are sometimes added to liquid formulas to assist in pulling the paraffin wax from the liquid to form a vapor barrier or to make a thick formula. Corrosion inhibitors are added to stabili2e tbe formula for packaging (qv). 

Valve I is opened and the trimethylindium is sublimed, under static vacuum, into the 2-L flask (trap-trap distilled). A hot-air gun is used to assist this sublimation process and to ensure that all the trimethylindium is collected on, or near, the surface of the cold, or frozen, amine/petroleum spirit suspension. When all the trimethylindium is trapped into the 2-L flask, valve D is closed to seal the 2-L flask and the rest of the system is filled with air through valve H (make sure valve D is closed ). The liquid nitrogen Dewar is removed and the 2-L flask is disengaged from the rest of the system by careful disconnection between the adaptor housing valve D and the U tube. The top of this adaptor is plugged with a stopper. 

---