Antistatic electrostatic spraying

Electrostatics Antistatic Electrostatic spraying Conductive pigments. Polar solvents... 

Uses Conductivity agent, antistat for electrostatic spray paints Features Not suitable for wh. painfs which will be stoved or put onto hot surfs., such as radiafors yellowing may occur Properties Flash pf. (PMCC) 40 C cafionic 80% act. in n-butanol Use Level 0.5-3% (paint)... 

Chem. Descrip. Coco-ethyidimonium ethosultate in ethylene glycol Uses Conductivity agent, antistat for plastics, electrostatic spray paints. Inks, adhesives... 

Uses Antistat for printing ink and electrostatic spray coatings antistat to aid in rolling of thin film materials such as PE Features Compat. with film formers Properties Amber liq. dens. 1.20-1.A Ib/gal Gardner vise. A-3 Use Level 0.3-1% of total solids Raybo 85 - Rustib [Raybo Chase Chem. Trading]... 

Pipe, Conduit, and Fence Post Coatings These compounds typically use 5-10 phr of total filler and pigment and 20-35 phr plasticizer. This suggests the use of resins of 0.60-0.75 IV. Both electrostatic spray and electrostatic fluidized bed coatings should be free of antistats (e.g., glyceryl monostearate). Barium/cadmium liquid stabUizers have been used routinely, with ESO at 4-5 phr. In most cases, barium/zinc liquids could be substituted. Erom 2-3 phr dispersion resin is used. 

The accumulation of dust on the surface of molded polycarbonate parts that may be caused by electrostatic charge can be reduced to a minimum by repeated application of an antistatic agent. Application can be performed by dipping, spraying, or rubbing with an approx. 1 % aqueous solution. 

Plastic surfaces can become electrostatically charged, resulting in dirt pick-up, adhesion problems, spark-induced explosions and electric shock to persons walking on plastic floors. Surface-active agents, used as p. (internal antistatic agents) or sprayed on the surface (external antistatic agents), prevent such difficulties. The following products are in use ... 

---