Antioxidants various

The ORAC assay proposed by Ou and others (2001) is limited to hydrophilic antioxidants because of the aqueous environment of the assay. However, lipophilic antioxidants play a critical role in biological defense systems. Huang and others (2002) expanded the assay to the lipidic fraction by introducing a randomly methylated 13-cyclodextrin (RMCD) as a water-solubility enhancer for lipophilic antioxidants. Various kinds of foods, including fruit juices and drinks, fruits, vegetables, nuts, and dried fruits, have been evaluated with this method (Zhou and Yu 2006 Wu and others 2004 Kevers and others 2007 Wang and Ballington 2007 Almeida and others 2008 Mullen and others 2007). 

Most TAC assays follow reactions proceeding in the aqueous phase, which can be influenced only by water-soluble antioxidants. Various procedures have been proposed to measure TAC of antioxidants that are lipophilic. 

Each antioxidant evaluation should thus be carried out under various conditions of oxidation, using several methods to measure different products of oxidation related to real food quality. There cannot be a short cut approach to determining the activity of antioxidants. Various testing protocols should consider the following parameters and recommendations ... 

Antioxidants have been shown to improve oxidative stabiHty substantially (36,37). The use of mbber-bound stabilizers to permit concentration of the additive in the mbber phase has been reported (38—40). The partitioning behavior of various conventional stabilizers between the mbber and thermoplastic phases in model ABS systems has been described and shown to correlate with solubiHty parameter values (41). Pigments can adversely affect oxidative stabiHty (32). Test methods for assessing thermal oxidative stabiHty include oxygen absorption (31,32,42), thermal analysis (43,44), oven aging (34,45,46), and chemiluminescence (47,48). 

Mineral oil and paraffins should not be used, because these are not metabolized and may irritate tissue. Various other additives are needed for stabiUty, stefihty, and isotonicity antimicrobial preservatives, antioxidants (qv), chelating agents (qv), and buffers. No parenteral container material is completely inert to parenteral solvent systems. 

Increasingly, plastics are being used as parenteral packaging (qv) materials. Plastics such as poly(vinyl chloride), polyethylene, and polypropylene are employed. However, plastics may contain various additives that could leach into the product, such as plasticizers (qv) and antioxidants. PermeabiUty of plastics to oxygen, carbon dioxide, and water vapor must be tested in the selection of plastic containers. Furthermore, the plastic should withstand sterilization. Flaking of plastic particles should not occur and clarity necessary for inspection should be present. 

Selection of Proper Antidegradant. Because the various antioxidants function by different mechanisms, an antioxidant under one condition may become an oxidation promoter in a different condition. Therefore, an antioxidant should be carefully selected depending on service requirements. Most antioxidants are either amines, phenols, or phosphates. The following are some important properties in the selection of proper antidegradant that should be considered. 

Types of Latex Compounds. For comparison with dry-mbber compounds, some examples of various latex compounds and the physical properties of their vulcanizates are given in Table 23. Recipes of natural mbber latex compounds, including one without antioxidant, and data on tensile strength and elongation of sheets made from those, both before and after accelerated aging, are also Hsted. The effects of curing ingredients, accelerator, and antioxidant are also Hsted. Table 24 also includes similar data for an SBR latex compound. A phenoHc antioxidant was used in all cases. 

Protective Systems. As in the case of sulfur vulcani2ation, there have been many research workers in the field of natural mbber oxidation and its protection (39,40). The principal problem has always been to find an antioxidant that provides protection against flex-cracking, and yet does not stain. None has been found as of the mid-1990s, hence it is best to categori2e the various types according to their capabiUties. 

Silicone Heat-Cured Rubber. Sihcone elastomers are made by vulcanising high molecular weight (>5 x 10 mol wt) linear polydimethylsiloxane polymer, often called gum. Fillers are used in these formulations to increase strength through reinforcement. Extending fillers and various additives, eg, antioxidants, adhesion promoters, and pigments, can be used to obtain certain properties (59,357,364). 

Polymers. In combination with various metal salts, sorbitol is used as a stabilizer against heat and light in poly(vinyl chloride) (qv) resins and, with a phenohc antioxidant, as a stabilizer in uncured styrene—butadiene mbber (qv) compositions and in polyolefins (see Heat stabilizers Olefin POLYMERS Rubbercompounding). Heat-sealable films are prepared from a dispersion of sorbitol and starch in water (255). Incorporation of sorbitol in coUagen films gready restricts their permeabiUty to carbon dioxide (256). 

Biochemical Functions. Ascorbic acid has various biochemical functions, involving, for example, coUagen synthesis, immune function, dmg metabohsm, folate metaboHsm, cholesterol cataboHsm, iron metaboHsm, and carnitine biosynthesis. Clear-cut evidence for its biochemical role is available only with respect to coUagen biosynthesis (hydroxylation of prolin and lysine). In addition, ascorbic acid can act as a reducing agent and as an effective antioxidant. Ascorbic acid also interferes with nitrosamine formation by reacting direcdy with nitrites, and consequently may potentially reduce cancer risk. 

Additives are used extensively in compounding this resin. Antioxidants (qv), uv stabilizers, especially carbon black (qv), and fillers (qv) such as glass fibers, sihca, or clay provide properties desirable for various purposes. 

The exterior durabiHty of relatively stable coatings can be enhanced by use of additives. Ultraviolet absorbers reduce the absorption of uv by the resins and hence decrease the rate of photodegradation. Eurther improvements can be gained by also adding free-radical trap antioxidants (qv) such as hindered phenols and especially hindered amine light stabilizers (HALS). A discussion of various types of additives is available (113). 

We have shown that known reaction of luminol with peroxydisulphate at low luminol concentrations takes place in the regime of controlled generation of SO ion-radicals at spontaneous destruction of peroxydisulphate. The detection limit for various types of antioxidants in water using this reaction is varied from 10 to 10 M. It is possible also to determine some polluting admixtures present in the atmosphere. The reagent used is the mixture of the luminol, base and K S O, which, once prepai ed, could be used during a working day. 

Without antioxidants virtually all rubber products, including those made from modem synthetic rubbers, undergo unacceptable performance degradation upon aging [195]. Various aromatic materials and particularly phenols have proven to... 

In the case of carbohydrates blue chromatogram zones are produced on a yellow background that slowly fades [2]. Steroids, vitamins, antioxidants, phenols and aromatic amines yield, sometimes even at room temperature, variously colored chromatogram zones [5]. -Blockers and laxatives also acquire various colors [7, 10]. The detection hmits are in the nanogram to microgram range [5]. 

A multidimensional system using capillary SEC-GC-MS was used for the rapid identification of various polymer additives, including antioxidants, plasticizers, lubricants, flame retardants, waxes and UV stabilizers (12). This technique could be used for additives having broad functionalities and wide volatility ranges. The determination of the additives in polymers was carried out without performing any extensive manual sample pretreatment. In the first step, microcolumn SEC excludes the polymer matrix from the smaller-molecular-size additives. There is a minimal introduction of the polymer into the capillary GC column. Optimization of the pore sizes of the SEC packings was used to enhance the resolution between the polymer and its additives, and smaller pore sizes could be used to exclude more of the polymer... 

---