Antioxidants alkyl sulfonate

Antistatic additives are designed to be present on the surface of the molded part to achieve the full antistatic benefit. The types of additives used to enhance antistatic properties include quaternary ammonium salts, alkyl sulfonates or phosphate plus alkali metals, ethoxylated amines, or gylcerol esters. Antistatics are typically used at higher levels than other additives such as antioxidants. Therefore, antistatics are likely to increase light scattering, making it more difficult to achieve the higher chroma colors. 

Additioaal uses for higher olefias iaclude the productioa of epoxides for subsequeat coaversioa iato surface-active ageats, alkylatioa of benzene to produce drag-flow reducers, alkylation of phenol to produce antioxidants, oligomeriza tion to produce synthetic waxes (qv), and the production of linear mercaptans for use in agricultural chemicals and polymer stabilizers. Aluminum alkyls can be produced from a-olefias either by direct hydroalumination or by transalkylation. In addition, a number of heavy olefin streams and olefin or paraffin streams have been sulfated or sulfonated and used in the leather (qv) iadustry. 

Toluenesulfonic Acid. Toluene reacts readily with fuming sulfuric acid to yield toluene—sulfonic acid. By proper control of conditions, /)i7n7-toluenesulfonic acid is obtained. The primary use is for conversion, by fusion with NaOH, to i ra-cresol. The resulting high purity i7n -cresol is then alkylated with isobutylene to produce 2 (i-dii-tert-huty -para-cmso (BHT), which is used as an antioxidant in foods, gasoline, and mbber. Mixed cresols can be obtained by alkylation of phenol and by isolation from certain petroleum and coal-tar process streams. 

Eew radical scavengers besides the HALS have been suggested as UV stabilisers for aromatic polyesters. Some time ago, it was noted that certain nitro compounds could be used as UV stabilisers for polyesters, but closer reading of the documents showed this to be limited to certain sulfonated copolyesters [202]. Benzofuran-2-ones have been suggested as UV stabilisers with a good chain breaking -acceptor action, i.e., capable of scavenging alkyl radicals [203, 204, 156], but these are more efficacious as thermal antioxidants and process stabilisers, especially when used in conjunction with hindered phenolic antioxidants. 

---