Amines maleimides

The aspects relevant to the use of rosin as such, or one of the derivatives arising from its appropriate chemical modification as monomer or comonomer [12-14], have to do with the synthesis of a variety of materials based on polycondensations and polyaddition reactions of structures bearing such moieties as primary amines, maleimides, epoxies, alkenyls and, of course, carboxylic acids. These polymers find applications in paper sizing, adhesion and tack, emulsification, coatings, drug delivery and printing inks. 

Dye = benzophenone, isopropyl thioxanthone, merocyanine, etc. Dye/amine/maleimide widi Dye = benzophenone, etc. Dye/amine/diphenyl iodonium salt with Dye = eosin, ketocoumarin, methylene blue, thioxanthene dye, fluorone dye, etc. Dye orate salt/triazine derivative with Dye = cyanine dye, styiylquinolinium dye, etc. Dye/borate salt/alkoxypyridinium salt with Dye = carbocyanine dye, etc. Pl/amine/triazine derivative with Dye = pyrromethene dye. Rose Bengal, etc. Dye/hexabisimidazole derivative (e.g. Cl-HABI)/thiol with PI = styiylnaphtothiazole dye, diethylamino benzophenone, julolidine dye, etc. Dye/amine (or... 

V-Alkyl or A/-aryl succinimides can be prepared from the corresponding amines (107) or from succinic anhydride, ammonia, and the corresponding alcohol (108). Succinimides are also obtained by vapor-phase hydrogenation of the corresponding maleimides ia the presence of a catalyst (109). 

The Michael addition reaction of amines and thiols with bismaleimides or functionalized monomaleimides is a versatile tool ia the synthesis of chain-extended maleimide-terroinated prepolymers. These prepolymers generally are soluble ia organic solvents from which they can be processed to prepreg and molded to high quaUty, void-free laminates. 

The original compound, maleimide (2,5-dioxo-A -pyrroline), is synthesized by the cyclo-condensation of ammonia and maleic acid. Similarly, primary amine is added to maleic anhydride, followed by cyclocondensation, to form N-substituted maleimide (Fig. 2). This reaction is applied to the preparation of bis-maleimides (BMl) [1]. At first, BMI was used as a crosslinking agent for natural rubber (NR). An o-dichlorobenzene solution of NR was crosslinked by BMI at I08-150°C in the presence of peroxides. The radicals generated from peroxides react with the double bonds of both BMI and NR [ 1 ]. 

St. Clair et. al. investigated a series of maleimide and nadimide terminated polyimides and developed LARC-13 [8,9]. Changing the terminal group from maleimide to nadimide, the value of the lap shear strength of a titanium lap shear joint increased from 7 to 19 MPa [9]. They also added an elastomeric component to the adhesive formulation. The introduction of 15 wt% of a rubbery component, ATBN (amine terminated butadiene nitrile polymer) and ADMS (aniline terminated polydimethyl siloxane) enhanced the adhesive properties as follows 19 MPa to 25 MPa (ATBN) titanium T-peel strength 0.2 kN/m to 1.4... 

Phosphorus containing poly(maleimide-amines) were synthesized from N,N -bisdichloromaleimido-3,3 -diphenyl alkylphosphine oxides and aromatic diamines or piperazine [144]. The polymers prepared from piperazine are soluble in DMF, DM AC, DMSO, etc., but have poor thermal stability and flame retardancy. 

The heterobifunctional PEGs are very useful in linking two entities in cases where a hydrophilic, flexible, and biocompatible spacer is needed. Preferred end groups for heterobifunctional PEGs are maleimides, vinyl sulfones, pyridyl disulfides, amines, carboxylic acids, and /V-hydroxysuccinimide (NHS) esters. 

Maleic acid imides (maleimides) are derivatives of the reaction of maleic anhydride and ammonia or primary amine compounds. The double bond of a maleimide may undergo an alkylation reaction with a sulfhydryl group to form a stable thioether bond (Chapter 2, Section 2.2). Maleic anhydride may presumably undergo the same reaction with cysteine residues and other sulfhydryl compounds. 

Figure 1.88 The maleimide group of BMPA reacts with a thiol-containing molecule to result in a modification having a terminal carboxylate group. Amine-containing molecules then can be conjugated to the carboxylate using a carbodiimide reaction with EDC.

Figure 5.4 SMCC reacts with amine-containing molecules to form stable amide bonds. Its maleimide end then may be conjugated to a sulfhydryl-containing compound to create a thioether linkage.

Figure 5.8 The reaction of GMBS with an amine-containing molecule yields a maleimide-activated intermediate that then can be used to crosslink with a sulfhydryl-containing compound.

A common choice of crosslinker for this type of reaction is sulfo-SMCC, which has been used extensively for antibody conjugation (Chapter 20, Section 1.1). A better option for dendrimer conjugation is to use a similar crosslinker design, but one that contains a hydrophilic PEG spacer arm to promote dendrimer hydrophilicity after modification. Derivatization of an amine-dendrimer with a NHS-PEG-maleimide can create an intermediate that is coated with water-soluble PEG spacers. This modification helps to mask any potential for nonspecific interactions that the PAMAM surface may have, while providing terminal thiol-reactive maleimides for coupling ligands (Figure 7.10). 

---