Hydride, aluminum compounds

Pulotov, M.S. (1991) Synthesis of aluminum hydride compounds, their reactions and physical and chemical properties, Abstract of Dissertation of Doctor of Chemistry, Tashkent. 

Stability and Formation of Adduct Organo-Aluminum Hydride Compounds... 

Much more work was done on extended quinones. Syntheses of six parent compounds (159-164) has been accomplished by two methods. In the first approach, a Friedel-Crafts reaction between thiophene-3,4-dicarboxylic acid and benzene or thiophenes was used, and in the second one chromium trioxide oxidation of the corresponding acetoxy derivatives was applied (72JOC1712). These systems behave differently in the presence of excess lithium aluminum hydride and aluminum hydride. Compounds 161 and 162 were reduced to hydroquinones, compounds 160 and 163 were deoxygenated... 

Synthesis by high-dilution techniques requires slow admixture of reagents ( 8-24 hrs) or very large volumes of solvents 100 1/mmol). Fast reactions can also be carried out in suitable flow cells (J.L. Dye, 1973). High dilution conditions have been used in the dilactam formation from l,8-diamino-3,6-dioxaoctane and 3,6-dioxaoctanedioyl dichloride in benzene. The amide groups were reduced with lithium aluminum hydride, and a second cyclization with the same dichloride was then carried out. The new bicyclic compound was reduced with diborane. This ligand envelops metal ions completely and is therefore called a cryptand (B. Dietrich, 1969). 

Sodium borohydride and lithium aluminum hydride react with carbonyl compounds in much the same way that Grignard reagents do except that they function as hydride donors rather than as carbanion sources Figure 15 2 outlines the general mechanism for the sodium borohydride reduction of an aldehyde or ketone (R2C=0) Two points are especially important about this process... 

In contrast to alcohols with their nch chemical reactivity ethers (compounds contain mg a C—O—C unit) undergo relatively few chemical reactions As you saw when we discussed Grignard reagents m Chapter 14 and lithium aluminum hydride reduc tions m Chapter 15 this lack of reactivity of ethers makes them valuable as solvents m a number of synthetically important transformations In the present chapter you will learn of the conditions m which an ether linkage acts as a functional group as well as the methods by which ethers are prepared... 

Reduction of an azide a nitrile or a nitro compound furnishes a primary amine A method that provides access to primary secondary or tertiary amines is reduction of the carbonyl group of an amide by lithium aluminum hydride... 

Diacyl peroxides have been reduced with a variety of reduciag agents, eg, lithium aluminum hydride, sulfides, phosphites, phosphines, and haUde ions (187). Hahdes yield carboxyUc acid salts (RO) gives acid anhydrides. With iodide ion and certain trivalent phosphoms compounds, the reductions are sufftcientiy quantitative for analytical purposes. 

AletalHydrides. Metal hydrides can sometimes be used to prepare amines by reduction of various functional groups, but they are seldom the preferred method. Most metal hydrides do not reduce nitro compounds at all (64), although aUphatic nitro compounds can be reduced to amines with lithium aluminum hydride. When aromatic amines are reduced with this reagent, a2o compounds are produced. Nitriles, on the other hand, can be reduced to amines with lithium aluminum hydride or sodium borohydride under certain conditions. Other functional groups which can be reduced to amines using metal hydrides include amides, oximes, isocyanates, isothiocyanates, and a2ides (64). 

The versatility of lithium aluminum hydride permits synthesis of alkyl, alkenyl, and arylsilanes. Silanes containing functional groups, such as chloro, amino, and alkoxyl in the organic substituents, can also be prepared. Mixed compounds containing both SiCl and SiH cannot be prepared from organopolyhalosilanes using lithium aluminum hydride. Reduction is invariably complete. 

High yields of optically active cyanohydrins have been prepared from hydrogen cyanide and carbonyl compounds using an enzyme as catalyst. Reduction of these optically active cyanohydrins with lithium aluminum hydride in ether affords the corresponding substituted, optically active ethanolamine (5) (see Alkanolamines). 

Cationic rings are readily reduced by complex hydrides under relatively mild conditions. Thus isoxazolium salts with sodium borohydride give the 2,5-dihydro derivatives (217) in ethanol, but yield the 2,3-dihydro compound (218) in MeCN/H20 (74CPB70). Pyrazolyl anions are reduced by borohydride to pyrazolines and pyrazolidines. Thiazolyl ions are reduced to 1,2-dihydrothiazoles by lithium aluminum hydride and to tetrahydrothiazoles by sodium borohydride. The tetrahydro compound is probably formed via (219), which results from proton addition to the dihydro derivative (220) containing an enamine function. 1,3-Dithiolylium salts easily add hydride ion from sodium borohydride (Scheme 20) (80AHC(27)151). 

Borohydride reduction of 3-aryl-l,2-benzisothiazole 1,1-dioxides gives the 2,3-dihydro compounds 73JMC1170). Reduction of either 2-methylsaccharin or 2-hydroxymethylsac-charin with lithium aluminum hydride gives the same product, iV-methyl-o-hydroxymethyl-benzenesulfonamide (73AHC(15)233). 

Hydroxymethylferrocene has been made by condensing ferrocene with N-methylformanilide to give ferrocenecarboxalde-hyde, and reducing the latter with lithium aluminum hydride, sodium borohydride, or formaldehyde and alkali. The present procedure is based on the method of Lindsay and Hauser. A similar procedure has been used to convert gramine methiodide to 3-hydroxymethylindole, and the method could probably be used to prepare other hydroxymethyl aromatic compounds. 

Methylindole has also been prepared by lithium aluminum hydride reduction of 1-methylindoxyl. Compounds giving rise to NH absorption in the infrared (indole, skatole) can be completely removed by refluxing the crude 1-methylindole over sodium for 2 days and then distilling the unreacted 1-methylindole from the sodio derivatives and tarry decomposition products. 

Kyba and eoworkers prepared the similar, but not identical compound, 26, using quite a different approach. In this synthesis, pentaphenylcyclopentaphosphine (22) is converted into benzotriphosphole (23) by reduction with potassium metal in THF, followed by treatment with o "t/20-dichlorobenzene. Lithium aluminum hydride reduction of 23 affords l,2-i>/s(phenylphosphino)benzene, 24. The secondary phosphine may be deprotonated with n-butyllithium and alkylated with 3-chlorobromopropane. The twoarmed bis-phosphine (25) which results may be treated with the dianion of 24 at high dilution to yield macrocycle 26. The overall yield of 26 is about 4%. The synthetic approach is illustrated in Eq. (6.16), below. 

---