Aluminum alumina

J. Paul, Alkali overlayers on aluminum, alumina, and aluminum carbide, Journal Vacuum Science Technology A 5(4), 664-670 (1987). 

Fig. 31. Scanning electron micrograph (SEM) and scanning Auger element maps for an array of four strips of gold numbers 1,3,6, and 8) and four of aluminum/alumina (numbers 2, 4, 5, and 7) on a silicon nitride substrate that was exposed to a mixture of HS(CH2),, C1 and CF3(CF2)8C02H in isooctane. The SEM and element maps are for the array viewed from above the schematic of the device (the height of the strips is not drawn to scale) is a side view [175]...

Synonym(s) Aluminum alumina fibre metana aluminum bronze aluminum dehydrated aluminum flake aluminum powder Aluminum trichloride trichloroaluminum0 aluminum chloride (1 3)... 

Aluminum oxide (AI2O3), often called alumina, is the principal raw material for the production of aluminum. Alumina occurs in the minerals corundum and bauxite. Determine the moles of aluminum ions (Al +) in 1.25 moles of aluminum oxide. 

As we will mainly consider the cavitation strength of light metal melts, let us discuss the problem by the example of the aluminum melt by taking into account the following system liquid aluminum-alumina-hydrogen. 

A novel nickel-aluminum-alumina catalyst was used in this work. The same catalyst was used in all tests although several different batches were prepared. Since a standardized procedure was used, variations in catalyst composition were not great and activity was reproducible. Because details of the preparation and composition are presented in several patent applications, no further discussion of the catalyst is given. 

Hayajneh, M.T., Hassan, A.M. and Mayyas, A.T. (2009) Artificial neural network modeling of the drilling process of self-lubricated aluminum/alumina/graphite hybrid composites synthesized by powder metallurgy technique, J Alloys Compd, 478 559-65. 

The essentially iono-covalent, non-metallic compounds that constitute ceramics are compounds formed between metals and non-metals. The opposition - the word is not too strong - between a metallic material and a metallic oxide can be illustrated by the comparison between a metal, aluminum, and its oxide, AI2O3 (alumina in English, where oxides are named by adding the ending a to the name of the metal aluminum/alumina, silicon/silica, magnesium/magnesia, uranium/urania, etc.) ... 

The results show that the fracture toughness of ICON A and B are slightly higher than typical ICON which has a fracture toughness of 4,2 MPa m . The MOR of TCON A and B is also smaller than fully dense aluminum/alumina TCON which material which is approximately 120-130 MPa. The specific MOR of TCON A and B is 0.0600 and 0.0513 MPa m /kg respectively. In comparison the specific MOR of the foam TCON is higher than typical TCON which is 0.0400 MPa m /kg. 

---