Aluminum acetate acetylacetonate

Acetylacetone has been prepared by the reaction of acetyl chloride with aluminum chloride followed by hydrolysis,3 and by the condensation of acetone with ethyl acetate under the influence of sodium,4 sodamide,5 and sodium ethoxide,5-6-7 and by the reaction of acetone and acetic anhydride in the presence of boron trifluoride.8... 

Tris. See Tris (hydroxymethyl) aminomethane Tris acetate. See Tris (hydroxymethyl) aminomethane acetate Tris (acetylacetonato) aluminum Tris (acetylacetonato) aluminum (III). See Aluminum acetylacetonate Tris (acetylacetonato) chromium (III). See Chromic acetylacetonate Tris (acetylacetonato) vanadium Tris (acetylacetonato) vanadium (III). See Vanadium tris acetyl acetonate Tris (acetylacetone) aluminum Tris (acetylacetonyl) aluminum. See Aluminum acetylacetonate... 

Aluminum acetylacetonate Chromic acetylacetonate Cobalt acetate (ous) Cobalt acetylacetonate Dicyandiamide Diethylaminoethyl acrylate Ferric acetylacetonate Magnesium acetylacetonate Manganese acetylacetonate Methyl morpholine oxide... 

Chromium sulfate (ic) crosslinking agent Acrylic acid/acrylamide copolymer Allylglycidyl ether alcohol resin Allyl isocyanate Aluminum acetylacetonate N-2-Aminoethyl-3-aminopropyl trimethoxysilane Ammonium persulfate t-Amyl peroxyacetate Bis (triethoxysilyl) ethane Chromic acetylacetonate Cobalt acetate (ous). 

This is the most commonly utilized method for synthesis of transition metal complexes with M —C a bonds. The following substrates are utilized halides, acetylacetonates, acetates, /-electron element alcoholates, as well as organometallic compounds of lithium, magnesium, aluminum, sodium, zinc, mercury, elements of group 14, etc. Ethers and hydrocarbons are used as solvents. In general, the synthesis should be carried out at lower temperatures and under inert atmosphere. 

Pd/AbOs catalyst is prepared by sol-gel method from a precursor solution of palladium acetylacetonate, aluminum tri-sec butoxide and sec-butanol. A required amount of acetic acid is added for the alkoxide hyrolysis and condensation. The obtained gel is then dried overnight at 70°C, calcined in flowing oxygen (1.8 1/h) at 700°C for 2h and reduced in flowing hydrogen ( 1.2 1/h) at 500°C for Ih. 

Spec A = 578 nm after separation of aluminum from the matrix materials by chloroform extraction of its acetylacetone complex (pH = 6.5), from an ammonium acetate-hydrogen peroxide medium Spec determination of the binary system (pH = 5)... 

---