Also Polarography

See also. Polarography Overview Inorganic Applications Organic Applications. 

See also Polarography Overview Techniques Organic Appiications. Voltammetry Overview Linear Sweep and Cyciic Anodic Stripping Cathodic Stripping Inorganic Compounds. 

Polarography is used extensively for the analysis of metal ions and inorganic anions, such as lOg and NOg. Organic compounds containing easily reducible or oxidizable functional groups also can be studied polarographically. Functional groups that have been used include carbonyls, carboxylic acids, and carbon-carbon double bonds. 

Miscellaneous Samples Besides environmental and clinical samples, differential pulse polarography and stripping voltammetry have been used for the analysis of trace metals in other samples, including food, steels and other alloys, gasoline, gunpowder residues, and pharmaceuticals. Voltammetry is also an important tool for... 

Analysis of Trace or Minor Components. Minor or trace components may have a significant impact on quaHty of fats and oils (94). Metals, for example, can cataly2e the oxidative degradation of unsaturated oils which results in off-flavors, odors, and polymeri2ation. A large number of techniques such as wet chemical analysis, atomic absorption, atomic emission, and polarography are available for analysis of metals. Heavy metals, iron, copper, nickel, and chromium are elements that have received the most attention. Phosphoms may also be detectable and is a measure of phosphoHpids and phosphoms-containing acids or salts. 

Finally, the techniques of nmr, infrared spectroscopy, and thin-layer chromatography also can be used to assay maleic anhydride (172). The individual anhydrides may be analyzed by gas chromatography (173,174). The isomeric acids can be determined by polarography (175), thermal analysis (176), paper and thin-layer chromatographies (177), and nonaqueous titrations with an alkaU (178). Maleic and fumaric acids may be separated by both gel filtration (179) and ion-exchange techniques (180). 

Zinc smelters use x-ray fluorescence spectrometry to analyze for zinc and many other metals in concentrates, calcines, residues, and trace elements precipitated from solution, such as arsenic, antimony, selenium, tellurium, and tin. X-ray analysis is also used for quaUtative and semiquantitative analysis. Electrolytic smelters rely heavily on AAS and polarography for solutions, residues, and environmental samples. 

Raki, a Turkish alcoholic drink was also analyzed by differential pulse polarography and copper, iron and zinc could be determined. For the arsenic content in beer a more sensitive method had to be applied. For this method a new catalytic method is established and the arsenic content was determined by using this new method. 

Pyrrolidine-l-carbodithioic acid ammonium salt [5108-96-3] M 164.3, m 128-130 , pK 3.25 (free acid). Purified by recryst twice by dissolving in MeOH and adding Et20. Also by recrystn from EtOH. [Synth and Polarography Kitagawa and Taku Bull Chem Soc Jpn 64 2151 1973 Malissa and Schdffmann Mikrochim Acta 187 1955.]... 

A comparison of the polarographic reduction of 2- and 3-substituted thiophenes have shown that the 2-isomers are more easily reduced than the 3-isomers. Polarography has also been used for the quantitative study of the dehalogenative reduction of 2-halo-5-carbonyl thiophenes and for the study of the hydroxychalcone-chromanone equilibrium in thienylsubstituted compounds. ... 

Commercial polarographs are also available in which the voltage scan is carried out automatically while a chart recorder plots the current-voltage curve. A counter-current control is incorporated which applies a small opposing current to the cell which can be adjusted to compensate for the residual current this leads to polarograms which are better defined. Most of these instruments also incorporate circuits which permit the performance of alternative, more sensitive types of polarography as discussed in Section 16.9... 

From the nature of the process described above it has been referred to as stripping polarography , but the term anodic stripping voltammetry is preferred. It is also possible to reverse the polarity of the two electrodes of the cell, thus leading to the technique of cathodic stripping voltammetry. 

Many impurities are present in commercial caprolactam which pass into the liquid wastes from PCA manufacture from which caprolactam monomer may be recovered. Also, the products of die thermal degradation of PCA, dyes, lubricants, and other PCA fillers may be contained in the regenerated CL. Identification of die contaminants by IR spectroscopy has led to the detection of lower carboxylic acids, secondary amines, ketones, and esters. Aldehydes and hydroperoxides have been identified by polarography and thin-layer chromatography. 

The term polarography basically refers to a method, where the current flowing across the electrochemical interface is recorded as a function of the applied electrode potential, historically in most cases a mercury electrode is involved. Thus polarography might be called also voltammetry. This sometimes results in confusing terms like e.g. AC voltammetry, which is obviously equivalent to AC polarography (see following entry). (Data obtained with this method are labelled DCP.)... 

The various oxidation states of sulfur have been determined by polarography. The electrochemical oxidation of sulfide ions in aqueous solution may lead to the production of elementary sulfur, polysulfides, sulfate, dithionate, and thiosulfate, depending on the experimental conditions. Disulfides, sulfoxides, and sulfones are typical polarographically active organic compounds. It is also found that thiols (mer-captans), thioureas, and thiobarbiturates facilitate oxidation of Hg resulting thus in anodic waves. 

---