Alloy evaluation anodic polarization curves

Partial anodic polarization curves of fast-dissolving alloy components under quasi-steady state conditions are of considerable interest for both practical and theoretical reasons. Experimental methods for their evaluation have been reviewed in the literature [71]. The most thoroughly investigated alloy/electrolyte system appears to be the anodic dissolution of Cu from binary Cu—Au alloys in acidic solutions. 

Electrochemical tests are rapid techniques to determine mechanisms, determine the effect of various parameters on corrosion rate, and screen out a large number of materials [43]. They usually involve measurement of corrosion potentials, corrosion currents, polarization curves, and electrochemical impedance. They are used to evaluate metals and alloys and the behavior of metallic, inorganic, and oiganic coatings. The simplest test involves the measurement of the corrosion potential and its use in conjunction with other measurements. A zero resistance ammeter (ZRA) is commonly used to measure corrosion currents between dissimilar metals and alloys. Controlled potentitd tests and anodic and cathodic polarization curves using potentiostats are the most commonly used electrochemical tests. These are powerful tools for investigating the effect of various parameters on corrosion behavior. These incorporate the use of cycUc polarization and polarization resistance for localized corrosion and corrosion rate measurements. Table 4 lists electrochemical tests that can be used for corrosion tests in the automobile industry. 

---