Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aldol reaction kinetics

While the fnnctional monomer was used to mimic the enamine-based mechanism of aldolase type I enzymes, the template was also designed to imitate the intermediate of the aldol reaction. Kinetic characterization of both... [Pg.3111]

Enantioselective refro-aldol reaction (Kinetic resolution) rAIA... [Pg.284]

Control of Regioselectivity and Stereoselectivity. The recognition by Ireland and co-workers that Hexamethylphosphoric Triamide has a profound effect on the stereochemistry of lithium enolates has led to the examination of the effects of other additives, as the ability to control enolate stereochemistry is of utmost importance for the stereochemical outcome of aldol reactions. Kinetic deprotonation of 3-pentanone with Lithium 2,2,6,6-Tetramethylpiperidide at 0 C in THF containing varying amounts of HMPA or TMEDA was found to give predominantly the (Z)-enolate at a base ketone additive ratio of ca. 1 1 1, whereas with a base.ketone.additive ratio 1 0.25 1, formation of the ( )-enolate was favored (Table I). This remarkable result contrasts with those cases where HMPA base ratios were varied towards larger amounts of HMPA, which favored formation of the (Z)-enolate. ... [Pg.365]

Li+, Mg 2+. AP+= enolates give comparable levels of diastereoselection for kinetic aldol reactions. [Pg.82]

It turned out that the dodecylsulfate surfactants Co(DS)i Ni(DS)2, Cu(DS)2 and Zn(DS)2 containing catalytically active counterions are extremely potent catalysts for the Diels-Alder reaction between 5.1 and 5.2 (see Scheme 5.1). The physical properties of these micelles have been described in the literature and a small number of catalytic studies have been reported. The influence of Cu(DS)2 micelles on the kinetics of quenching of a photoexcited species has been investigated. Interestingly, Kobayashi recently employed surfactants in scandium triflate catalysed aldol reactions". Robinson et al. have demonshuted that the interaction between metal ions and ligand at the surface of dodecylsulfate micelles can be extremely efficient. ... [Pg.139]

When the aldol reaction is carried Wt under thermodynamic conditions, the product selectivity is often not as high as under kinetic conditions. All the regioisomeric and stereoisomeric enolates may participate as nucleophiles. The adducts can return to reactants, and so the difference in stability of the stereoisomeric anti and syn products will determine the product composition. [Pg.469]

Stannous triflate is an efficient catalyst for aldol-type condensations [ 23, 124, 125 Under conditions of kinetic control, it provides excellent diastereo-selectivity in various cross-aldol reactions (equation 61)... [Pg.965]

Various competitive reactions can reduce the yield of the desired Michael-addition product. An important side-reaction is the 1,2-addition of the enolate to the C=0 double bond (see aldol reaction, Knoevenagel reaction), especially with a ,/3-unsaturated aldehydes, the 1,2-addition product may be formed preferentially, rather than the 1,4-addition product. Generally the 1,2-addition is a kinetically favored and reversible process. At higher temperatures, the thermodynamically favored 1,4-addition products are obtained. [Pg.202]

The investigation of the driving forces and robnstness of proline-catalyzed aldol reaction is performed by ntilizing the methodology of reaction progress kinetic analysis. [Pg.445]

A full kinetic study of the proline-mediated aldol reaction based on a detailed catalytic reaction mechanism will be published separately. [Pg.448]

The values of x = 0.5 and = 1 for the kinetic orders in acetone [1] and aldehyde [2] are not trae kinetic orders for this reaction. Rather, these values represent the power-law compromise for a catalytic reaction with a more complex catalytic rate law that corresponds to the proposed steady-state catalytic cycle shown in Scheme 50.3. In the generally accepted mechanism for the intermolecular direct aldol reaction, proline reacts with the ketone substrate to form an enamine, which then attacks the aldehyde substrate." A reaction exhibiting saturation kinetics in [1] and rate-limiting addition of [2] can show apparent power law kinetics with both x and y exhibiting orders between zero and one. [Pg.451]

Reaction progress kinetic analysis offers a reliable alternative method to assess the stability of the active catalyst concentration, again based on our concept of excess [e]. In contrast to our different excess experiments described above, now we carry out a set of experiments at the same value of excess [ej. We consider again the proline-mediated aldol reaction shown in Scheme 50.1. Under reaction conditions, the proline catalyst can undergo side reactions with aldehydes to form inactive cyclic species called oxazolidinones, effectively decreasing the active catalyst concentration. It has recently been shown that addition of small amounts of water to the reaction mixture can eliminate this catalyst deactivation. Reaction progress kinetic analysis of experiments carried out at the same excess [e] can be used to confirm the deactivation of proline in the absence of added water as well to demonstrate that the proline concentration remains constant when water is present. [Pg.452]

The aldol reaction is also important in the synthesis of more complex molecules and in these cases control of both regiochemistry and stereochemistry is required. In most cases, this is accomplished under conditions of kinetic control. In the sections that follow, we discuss how variations of the basic mechanism and selection of specific reagents and reaction conditions can be used to control product structure and stereochemistry. [Pg.65]

Aldol Reactions of Lithium Enolates. Entries 1 to 4 in Scheme 2.1 represent cases in which the nucleophilic component is a lithium enolate formed by kinetically controlled deprotonation, as discussed in Section 1.1. Lithium enolates are usually highly reactive toward aldehydes and addition occurs rapidly when the aldehyde is added, even at low temperature. The low temperature ensures kinetic control and enhances selectivity. When the addition step is complete, the reaction is stopped by neutralization and the product is isolated. [Pg.67]

From these and many related examples the following generalizations can be made about kinetic stereoselection in aldol additions of lithium enolates. (1) The chair TS model provides a basis for analyzing the stereoselectivity observed in aldol reactions of ketone enolates having one bulky substituent. The preference is Z-enolate syn aldol /(-enolate anti aldol. (2) When the enolate has no bulky substituent, stereoselectivity is low. (3) Z-Enolates are more stereoselective than /(-enolates. Table 2.1 gives some illustrative data. [Pg.69]

The aldol reaction can be applied to dicarbonyl compounds in which the two groups are favorably disposed for intramolecular reaction. Kinetic studies on cyclization of 5-oxohexanal, 2,5-hexanedione, and 2,6-heptanedione indicate that formation of five-membered rings is thermodynamically somewhat more favorable than formation of six-membered rings, but that the latter is several thousand times faster.170 A catalytic amount of acid or base is frequently satisfactory for formation of five- and six-membered rings, but with more complex structures, the techniques required for directed aldol condensations are used. [Pg.134]

Silyloxy)alkenes were first reported by Mukaiyama as the requisite latent enolate equivalent to react with aldehydes in the presence of Lewis acid activators. This process is now referred to as the Mukaiyama aldol reaction (Scheme 3-12). In the presence of Lewis acid, anti-aldol condensation products can be obtained in most cases via the reaction of aldehydes and silyl ketene acetals generated from propionates under kinetic control. [Pg.145]

The medicinally important )3-lactam antibiotic thienamycin (34) has stimulated several investigations into the application of the aldol reaction for the introduction of the hydroxyethyl moiety with the indicated Cg and Cg stereochemistry (29,30). Low-temperature enolization (LDA, THF) of either 35 (29a,b) or 36 (30) and subsequent condensation with excess acetaldehyde afforded the illustrated kinetic aldol adducts (eqs. [22] and [23]). In both examples the modest levels of threo diastereoselection are comparable to related data for unhindered cyclic ketone lithium enolates. Related condensations on the penam nucleus have also been reported (31). [Pg.26]

Influence of Metal Center on Kinetic Aldol Reactions with Benzaldehyde... [Pg.49]

Nucleophilic attack of hydroxide ion on the a-carbon atom, with subsequent cleavage of the Ca—Cp bond, has been proposed to account for the kinetics of retro-aldol reaction of substituted benzylidene malononitriles with hydroxide ion in 90%... [Pg.413]

Figure 1. Kinetic parameters for the selection of antibody-catalyzed aldol and retro-aldol reactions, reflecting the biocatalyst s ability to accept substrates that differ clearly with respect to their molecular geometry. No background reaction was observed for the self-condensation of cyclopentanone. The indicated value for cyclopentanone addition to pentanal was estimated using the published kuncat value of 2.28 X 10 M s for the aldol addition of acetone to an aldehyde. Reproduced with permission of the authors and the American Association for the Advancement of Science. Figure 1. Kinetic parameters for the selection of antibody-catalyzed aldol and retro-aldol reactions, reflecting the biocatalyst s ability to accept substrates that differ clearly with respect to their molecular geometry. No background reaction was observed for the self-condensation of cyclopentanone. The indicated value for cyclopentanone addition to pentanal was estimated using the published kuncat value of 2.28 X 10 M s for the aldol addition of acetone to an aldehyde. Reproduced with permission of the authors and the American Association for the Advancement of Science.
Arnett and coworkers later examined the reaction of lithium pinacolone enoiate with substituted benzaldehydes in THE at 25 °C. The determination of the heat of reaction indicated that the Hammett p value for the process is 331. Although the aldol reaction was instantaneous in THF at 25 °C, the reaction with o- or p-methylbenzaldehyde could be followed using a rapid injection NMR method in methylcyclohexane solvent at —80 °C. Application of Eberson s criterion based on the Marcus equation, which relates the free energy of ET determined electrochemically and the free energy of activation determined by kinetics, revealed that the barriers for the ET mechanism should be unacceptably high. They concluded that the reaction proceeds via the polar mechanism . Consistent with the polar mechanism, cyclizable probe experiments were negative . The mechanistic discrepancy between the reactions of benzaldehyde and benzophenone was later solved by carbon kinetic isotope effect study vide infraf. ... [Pg.911]

The effectiveness of magnesium enolates as nucleophilic agents limits the interest of the reaction. With less substituted substrates (R = H), the aldol reaction is faster than the sily-lation. Moreover, due to solubility limitations, the authors are unable to determine whether the high thermodynamic kinetic ratio of silylenol ethers obtained accurately represents the magnesium enolate composition. Nonetheless, this method is an excellent procedure to selectively prepare the thermodynamic silylenol ether from an unsymmetrical ketone. ... [Pg.473]

Dialkylzinc derivatives are inert towards conjugated enones (e.g. 181) in hydrocarbon or ethereal solvents. The discovery that a conjugate addition can be promoted by Cu(I) salts in the presence of suitable ligands L (e.g. sulphonamide 182) opened a new route to zinc enolates (e.g. 183), and hence to the development of three-component protocols, such as the tandem 1,4-addition/aldol addition process outlined in equation 92186. If the addition of the aldehyde is carried out at —78 °C, the single adduct 184 is formed, among four possible diastereomeric products. The presence of sulphonamide is fundamental in terms of reaction kinetics its role is supposed to be in binding both Cu(I) and Zn(II) and forming a mixed metal cluster compound which acts as the true 1,4-addition catalyst. [Pg.846]

As with homogeneous aldol reactions, simple power-type rate equations have been frequently used to describe the kinetics of solid-catalysed condensations. For several liquid phase reactions, second-order kinetics was established, viz. [Pg.342]


See other pages where Aldol reaction kinetics is mentioned: [Pg.412]    [Pg.348]    [Pg.412]    [Pg.348]    [Pg.215]    [Pg.246]    [Pg.447]    [Pg.450]    [Pg.65]    [Pg.1231]    [Pg.244]    [Pg.112]    [Pg.113]    [Pg.152]    [Pg.230]    [Pg.232]    [Pg.341]    [Pg.318]    [Pg.116]    [Pg.63]    [Pg.193]   
See also in sourсe #XX -- [ Pg.461 , Pg.462 , Pg.463 ]

See also in sourсe #XX -- [ Pg.685 ]




SEARCH



Aldol reaction kinetic control

Antibody 38C2-Catalyzed Retro-aldol Reactions and their Application to Kinetic Resolution

Kinetic isotope effects Aldol-Tishchenko reaction

Kinetic resolution aldol reactions

Kinetic stereoselectivity Aldol-type reactions

Kinetically Controlled Aldol Diastereoselection Achiral Reaction Partners

© 2024 chempedia.info