Chiral auxiliaries aldehydes

Chiral oxazolines developed by Albert I. Meyers and coworkers have been employed as activating groups and/or chiral auxiliaries in nucleophilic addition and substitution reactions that lead to the asymmetric construction of carbon-carbon bonds. For example, metalation of chiral oxazoline 1 followed by alkylation and hydrolysis affords enantioenriched carboxylic acid 2. Enantioenriched dihydronaphthalenes are produced via addition of alkyllithium reagents to 1-naphthyloxazoline 3 followed by alkylation of the resulting anion with an alkyl halide to give 4, which is subjected to reductive cleavage of the oxazoline moiety to yield aldehyde 5. Chiral oxazolines have also found numerous applications as ligands in asymmetric catalysis these applications have been recently reviewed, and are not discussed in this chapter. ... 

Cleavage of the chiral auxiliary is effected in a three-step procedure commencing with quatemization of the nitrogen with methyl fluorosulfonate, methyl trlfluoromethanesulfonate, or trimethyloxonium tetrafluoroborate. Reduction of the corresponding iminium salt 19 with NaBH4 and acidic hydrolysis of the resulting product affords substituted aldehyde 5 without epimerization of either stereocenter. 

A -sulfinyl chiral auxiliaries have been used to prepare enantiopure tetrahydro-P-carbolines and tetrahydroisoquinolines in good yields under mild reaction conditions. Both enantiomers of V-p-toluenesulfinyltryptamine 46 could be readily prepared from the commercially available Andersen reagents.Compound 46 reacted with various aliphatic aldehydes in the presence of camphorsulfonic acid at -78 °C to give the A-sulfinyl tetrahydro-P-carbolines 47 in good yields. The major diastereomers were obtained after a single crystallization. Removal of the sulfinyl auxiliaries under mildly acidic conditions produced the tetrahydro-P-carbolines 48 as single enantiomers. 

Cleavage of the chiral auxiliary is carried out by exhaustive methylation. followed by hydrolysis, which leads to x-methoxy aldehydes 7 that can be further oxidized to the corresponding oc-methoxy acids. 

Cleavage of the oxathiane moiety can be carried out with iV-chlorosuccinimide/silver nitrate and leads to the a-hydroxy aldehyde 21 along with a diastereomeric mixture of sultines 20. The sultines can be reduced to the hydroxy thiol 22 which can be reconverted to the chiral auxiliary 16 in ail overall recovery of about 70%39. 

Addition reactions to aldehydes in the presence of the tartaric acid derived chiral auxiliaries (.S ..S )-l,2,3,4-tetramethoxybutane (5), (S,.S)-2,3-dimethoxy-A%V,/V, A,, -tctramethyl-l,4-bu-tanediamine (6) and (5,5)-2,3-bis[2-(dimethylamino)ethoxy]-Af,yV,A. iV -tetramethyl-l,4-bu-tanediamine (7) have been studied in detail9" u. Again there was low enantioselection (generally 10-55% ee). 

While the mechanism of the ammonium salt catalyzed alkylation is unclear, in polar solvents the enantioselectivity of the addition of dialkylzincs to aldehydes generally drops considerably, probably due to uncatalyzed product formation or complexation of the zinc reagent with the polar solvent rather than with the chiral auxiliary. 

Only few allyltitanium reagents bearing a removable chiral auxiliary at the allylic residue are known. The outstanding example is a metalated 1-alkyl-2-imidazolinone14, derived from (—)-ephedrine, representing a valuable homoenolate reagent. After deprotonation by butyllithium, metal exchange with chlorotris(diethylamino)titanium, and aldehyde or ketone addition, the homoaldol adducts are formed with 94 to 98% diastereoselectivity. 

In addition to ketone enolates, azaenolatcs with chiral auxiliary groups attached to the nitrogen atom are suitable for the introduction of an a-unsubstituted enolate of the keto-type into an aldehyde in a stereoselective manner (see Section D.1.3.5.). 

R)- and (,S )-1.1,2-Triphenyl-l,2-ethancdiol which are reliable and useful chiral auxiliary groups (see Section 1.3.4.2.2.3.) also perform ami-sclcctive aldol additions with remarkable induced stereoselectivity72. The (/7)-diastercomer, readily available from (7 )-methyl mandelate (2-hy-droxy-2-phcnylaeetate) and phenylmagnesium bromide in a 71 % yield, is esterified to give the chiral propanoate which is converted into the O-silyl protected ester by deprotonation, silylation, and subsequent hydrolysis. When the protected ester is deprotonated with lithium cyclohexyliso-propylamide, transmetalated by the addition of dichloro(dicyclopentadienyl)zirconium, and finally reacted with aldehydes, predominantly twm -diastereomers 15 result. For different aldehydes, the ratio of 15 to the total amount of the syn-diastereomers is between 88 12 and 98 2 while the chemical yields are 71 -90%. Furthermore, high induced stereoselectivity is obtained the diastereomeric ratios of ami-15/anti-16 arc between 95 5 and >98 2. 

In another approach, a glucose-derived titanium enolate is used in order to accomplish stereoselective aldol additions. Again the chiral information lies in the metallic portion of the enolate. Thus, the lithiated /m-butyl acetate is transmetalated with chloro(cyclopentadienyl)bis(l,2 5,6-di-0-isopropylidene- -D-glucofuranos-3-0-yl)titanium (see Section I.3.4.2.2.I. and 1.3.4.2.2.2.). The titanium enolate 5 is reacted in situ with aldehydes to provide, after hydrolysis, /i-hydroxy-carboxylic acids with 90 95% ee and the chiral auxiliary reagent can be recovered76. 

Acetylsultam 15 is also used for stereoselective syntheses of a-unsubstituted /1-hydroxy-carboxylic acids. Thus, conversion of 15 into the silyl-A/O-ketene acetal 16 and subsequent titanium(IV) chloride mediated addition to aldehydes lead to the predominant formation of the diastereomers 17. After separation of the minor diastereomer by flash chromatography, alkaline hydrolysis delivers /f-hydroxycarboxylic acids 18, with liberation of the chiral auxiliary reagent 1919. 

When a mixture of aldehydes and (Z)-l-ethylthio-l-trimethylsilyloxy-l-propene is added slowly to a solution of tin(Il) triflate and 10-20 mol% of the chiral diamine 4 in acetonitrile, /1-silyloxy thioesters 5 are obtained in high simple diastereoselection and induced stereoselectivity. Thus, the chiral auxiliary reagent can be used in substoichiometric amount. A rationale is given by the catalytic cycle shown below, whereby the chiral tin(II) catalyst 6 is liberated once the complex 7 has formed33. 

Chiral imines derived from 1-phenylethanone and (I. Sj-exo-l, 7,7-trimethyIbicyclo-[2.2.1]heptan-2-amine [(S)-isobornylamine], (.S>1-phenylethanamine or (R)-l-(1-naphthyl) ethanamine are transformed into the corresponding (vinylamino)dichloroboranes (e.g., 3) by treatment with trichloroborane and triethylamine in dichloromethane. Reaction of the chiral boron azaenolates with aromatic aldehydes at 25 "C, and subsequent acidic hydrolysis, furnishes aldol adducts with enantiomeric excesses in the range of 2.5 to 47.7%. Significantly lower asymmetric inductions are obtained from additions of the corresponding lithium and magnesium azaenolates. Best results arc achieved using (.S )-isobornylamine as the chiral auxiliary 3. 

In Ugi four-component reactions (for mechanism, see Section 1.4.4.1.) all four components may potentially serve as the stereodifferentiating tool65. However, neither the isocyanide component nor the carboxylic acid have pronounced effects on the overall stereodiscrimination60 66. As a consequence, the factors influencing the stereochemical course of Ugi reactions arc similar to those in Strecker syntheses. The use of chiral aldehydes is commonly found in substrate-controlled syntheses whereas the asymmetric synthesis of new enantiomerically pure compounds via Ugi s method is restricted to the application of optically active amines as the chiral auxiliary group. 

An excellent synthetic method for asymmetric C—C-bond formation which gives consistently high enantioselectivity has been developed using azaenolates based on chiral hydrazones. (S)-or (/ )-2-(methoxymethyl)-1 -pyrrolidinamine (SAMP or RAMP) are chiral hydrazines, easily prepared from proline, which on reaction with various aldehydes and ketones yield optically active hydrazones. After the asymmetric 1,4-addition to a Michael acceptor, the chiral auxiliary is removed by ozonolysis to restore the ketone or aldehyde functionality. The enolates are normally prepared by deprotonation with lithium diisopropylamide. 

Mukaiyama aldol reactions have been reported, usually using chiral additives although chiral auxiliaries have also been used. This reaction can also be run with the aldehyde or ketone in the form of its acetal R R C(OR )2> in which case the product is the ether R COCHR2CR R OR instead of 27. Enol acetates and enol ethers also give this product when treated with acetals and TiCLi or a similar catalyst. When the catalyst is dibutyltin bis(triflate), Bu2Sn(OTf)2, aldehydes react, but not their acetals, while acetals of ketones react, but not the ketones themselves. 

Scheme 2.6 shows some examples of the use of chiral auxiliaries in the aldol and Mukaiyama reactions. The reaction in Entry 1 involves an achiral aldehyde and the chiral auxiliary is the only influence on the reaction diastereoselectivity, which is very high. The Z-boron enolate results in syn diastereoselectivity. Entry 2 has both an a-methyl and a (3-benzyloxy substituent in the aldehyde reactant. The 2,3-syn relationship arises from the Z-configuration of the enolate, and the 3,4-anti stereochemistry is determined by the stereocenters in the aldehyde. The product was isolated as an ester after methanolysis. Entry 3, which is very similar to Entry 2, was done on a 60-kg scale in a process development investigation for the potential antitumor agent (+)-discodermolide (see page 1244). 

In Entry 5, the aldehyde is also chiral and double stereodifferentiation comes into play. Entry 6 illustrates the use of an oxazolidinone auxiliary with another highly substituted aldehyde. Entry 7 employs conditions that were found effective for a-alkoxyacyl oxazolidinones. Entries 8 and 9 are examples of the application of the thiazolidine-2-thione auxiliary and provide the 2,3-syn isomers with diastereofacial control by the chiral auxiliary. 

Crimmins and co-workers have developed (V-acyloxazolidinethiones as chiral auxiliaries. These reagents show excellent 2,3-syn diastereoselectivity and enantio-selectivity in additions to aldehydes. The titanium enolates are prepared using TiCl4, with (-)-sparteine being a particularly effective base.141... 

Camphor-derived sulfonamide can also permit control of enantioselectivity by use of additional Lewis acid. These chiral auxiliaries can be used under conditions in which either cyclic or noncyclic TSs are involved. This frequently allows control of the syn or anti stereoselectivity.143 The boron enolates give syn products, but inclusion of SnCl4 or TiCl4 gave excellent selectivity for anti products and high enantioselectivity for a range of aldehydes.145... 

The syntheses in Schemes 13.45 and 13.46 illustrate the use of oxazolidinone chiral auxiliaries in enantioselective synthesis. Step A in Scheme 13.45 established the configuration at the carbon that becomes C(4) in the product. This is an enolate alkylation in which the steric effect of the oxazolidinone chiral auxiliary directs the approach of the alkylating group. Step C also used the oxazolidinone structure. In this case, the enol borinate is formed and condensed with an aldehyde intermediate. This stereoselective aldol addition established the configuration at C(2) and C(3). The configuration at the final stereocenter at C(6) was established by the hydroboration in Step D. The selectivity for the desired stereoisomer was 85 15. Stereoselectivity in the same sense has been observed for a number of other 2-methylalkenes in which the remainder of the alkene constitutes a relatively bulky group.28 A TS such as 45-A can rationalize this result. 

The C(9)-C(14) segment VI was prepared by Steps D-l to D-3. The formation of the vinyl iodide in Step D-3 was difficult and proceeded in only 25-30% yield. The C(15)-C(21) segment VII was synthesized from the common intermediate 17 by Steps E-l to E-6. A DDQ oxidation led to formation of a 1,3-dioxane ring in Step E-l. The A-methoxy amide was converted to an aldehyde by LiAlH4 reduction and the chain was extended to include C(14) and C(15) using a boron enolate of an oxazo-lidinone chiral auxiliary. After reductive removal of the chiral auxiliary, the primary alcohol group was converted to a primary iodide. The overall yield for these steps was about 25%. 

Nagao, Y., Hagiwara, Y., Kumagai, T., Ochiai, M., Inoue, T., Hashimoto, K., and Fujita, E. (1986). New C4-chiral l,2-thiazolidine-2-thiones Excellent chiral auxiliaries for highly diastereocontrolled aldol-type reactions of acetic acid and a,b-unsaturated aldehydes. J. Org. Chem. 51, 2391-2393. 

---