Epoxies/adhesives valves

The type of pumps used to dispense epoxy adhesives depends on whether it is a one-part or two-part adhesive. One-part epoxy adhesives are dispensed using direct metering extrusion pumps. An electric motor pushes a follower plate into a drum of adhesive, which is then extruded through a hose to the dispensing valve. This technique is used for medium-and high-volume production rates. 

This company s new 2600-093 Micro-Kiss series mix-dispense valves are designed for the low-flow mixing and dispensing of two-component adhesives and sealants such as silicones, epoxies, urethanes, and acrylics. The valves can be used to apply two-part adhesives and sealants for bonding, gasketing, potting and filling processes in aerospace, appliance, contractor, defense, electronics, filters, marine. 

MicroMax / GPD Global 12 X 12 2.25 True Value Pump/ servo-driven valve/36,000 SMT adhesive, conductive epoxies, no-flow underflll (unheated), hybrid assembly, small-dot dispensing SMT Adhesives Amicon D125F, 125FDR, Loctite Chipbonder 3615 (red), Dymax 9-20367 (red) and 9-20368 (yeUow), Amicon E7650, 7652, conductive epoxies Ablebond 84-1 LMl, no-flow underfill Amicon E1330 LV, 1350, and 1355. 

Structural components for bioprosthetic heart valves (poly(acetals)], artificial heart housings, catheter components, two-part systems for adhesives (e.g., epoxies)... 

---