Adhesion gravure coatings

Uses Antifoam, defoamer for water-based systems employing resin latex binders, e.g., for pressure-sensitive adhesives, gravure inks, elastomeric coatings, clear finishes, saturants food pkg. adhesives, paper/ paperboard emulsifier in mfg. of food-contact articles defoamer in food-contact coatings, paper/paperboard... 

This flexibility has proven invaluable in the design of coater-ready aqueous adhesives which are specifically designed for a wide range of application techniques. These techniques include reverse roll coating, curtain coating, gravure coating, and spray application. Key characteristics built into the aqueous adhesives to permit such a wide variety of application techniques include ... 

Chem. Descrip. Petroleum distillates, hydrotreated light and stearic acid CAS 64742-47-8 57-11-4 EINECS/ELINCS 265-149-8 200-313-4 Uses Defoamer providing quick foam knock-down in high-surfactant polymerizations for pressure-sensitive adhesives, gravure inks defoamer in food-contact coatings, paper/paperboard food-pkg. adhesives Features Low carryover into compounding exc. compat. 

Uses Defoamer for syn. latexes, general paints, board coatings, gravure inks, pressure-sensitive adhesives, clear coats, PVAc, vinyl acrylic, acrylic emulsion compds., food-contact coatings/paper food-pkg. adhesives Features Emulsifiable... 

Uses Defoamer for adhesives, pressure-sensitive adhesives, gravure inks, aq. urethane coatings, paper coatings, paints, latex applies. defoamer in food-con-tact coatings and paper/paperboard food-pkg. adhesives Features General-purpose silicone-free... 

Uses Defoamer for syn. and nat. latex adhesives, gravure inks, low gloss architectural and elastomeric coatings, predispersed tinting pigments, phenolic-based wood adhesives... 

Uses Defoamer for leather cleaning and preparation, adhesives, gravure inks and coatings... 

Films are either coextruded [12] or printed on the back of a very transparent material. The binder of these screen inks or gravure inks has to have a high melting point or crosslinking to form an elastic film to avoid being replaced by the hot injected polymer. It is also possible to coat the backside of the film with an adhesion promoter, which prevents direct contact between the printed area and the polymer. This coating can also improve the adhesion between the film and the injection-molded part [13]. 

Cheiv. Descrip. Benzophenone CAS 119-61-9 EINECS/ELINCS 204-337-6 Uses Free radical initiator for UV curing used in adhesives, chem. intermediates, coatings (metal, paper, wood), electronics (conformal, encapsulants, photoresists, solder masks), inks (flexo and gravure, litho, offset, screen) intermediate for mfg. of antihistamines, hypnotics, insecticides... 

Chem. Descrip. Epoxy acrylate, with 3800 ppm MEHQ Uses Epoxy for adhesives (anaerobic, binder, pressure sensitive, structural), coatings (glass, metal, optical, paper, plastic, wood, PVC floor), electronics, inks (flexo and gravure, litho, offset, screen), and sealants Features High reactivity, chem. resist. 

---