Acrylic acid triacetate

This reaction is utilized by Burrows et al. [70] to photoinitiate grafting of acrylamide, acrylic acid, methacrylamide, and acrylonitrile on cellulose triacetate in acidic aqueous solution. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

Regenerated cellulose (cellophane), poly(vinyl alcohol) (PVA), cellulose acetate (CA), cellulose triacetate (CTA), two blends of CTA (B1 and B2) with acrylic acid, poly(dimethylsiloxane) (PDMS), and linear low density polyethylene (LLDPE) membrane... 

Samaron Thickener N. [Hoechst AG] Acrylic acid based high polymer thickener for printing with nonionic dispersing dyes on polyester and triacetate fl-bors. 

Tosyloxypyridine, from pyri-dine-l-oxide, 723 trans-2-Imino-l 2ff)-pyridine-acrylic acid, 71 Triacetic acid lactone, 655 reaction with, amines, 655 ammonia, 655 glycine, 655... 

Cellulose di- and triacetate fibres (CA, CT) as well as acrylic fibres (polyacrylonitrile, PAN) are all soluble in the zinc chloride-iodine reagent. An initial differentiation is made using the acetone test on a watchglass only CA and CT fibres dissolve (evidenced by a cloudy evaporation residue). Differentiation between CA and CT fibres CA dissolves in Frott6 II reagent (see Table 8.1), CT only swells. Results are similar in zinc chloride/formic acid, but with a less distinct difference (CT swells more markedly). PAN fibres dissolve in cold concentrated nitric acid and in dimethylformamide at 100 °C. They swell in boiling 85 % formic acid and decompose at about 280 °C without melting. 

---