Acrylic acid benzyl ester

Acrylic acid, benzyl ester AI3-03836 Benzyl acrylate EINECS 219-673-9 Melcril 4085 NSC 20964 2-Propenoic acid, phenylmethyl ester Sartomer SR 432 SR 432. Used as a monomer. Liquid bp = 228 , bps = 110-111 d O d 1.0573 km = 251, 257, 263, 267 nm (cyclohexane) insoluble in H2O, soluble in EtOH, EtzO, MezCO, CCI4. Danbert Chemical Co. 

CAS 2495-37-6 EINECS/ELINCS 219-674-4 Synonyms 2-Methyl-acrylic acid benzyl ester... 

C16H14O2 tra s-3-pbenyl-acrylic acid benzyl ester 103-41-3... 

Various alkylating agents are used for the preparation of pyridazinyl alkyl sulfides. Methyl and ethyl iodides, dimethyl and diethyl sulfate, a-halo acids and esters, /3-halo acids and their derivatives, a-halo ketones, benzyl halides and substituted benzyl halides and other alkyl and heteroarylmethyl halides are most commonly used for this purpose. Another method is the addition of pyridazinethiones and pyridazinethiols to unsaturated compounds, such as 2,3(4//)-dihydropyran or 2,3(4//)-dihydrothiopyran, and to compounds with activated double bonds, such as acrylonitrile, acrylates and quinones. 

Reichmanis et al. (38, 40), Wilkins et al. (39), and Chandross et al. (41) redesigned both the dissolution inhibitor and the matrix resin. They evaluated a variety of o-nitrobenzylcholates (structure 3.6) that are initially insoluble in alkaline developer but are cleaved upon UV radiation to form base-soluble species. As shown in Scheme 3.3, irradiation of the o-nitro-benzyl ester results in rearrangement and degradation to generate a carboxylic acid and o-nitrosobenzaldehyde (R = H in Scheme 3.3) (42). The matrix resin chosen is a copolymer of methyl acrylate and methacrylic acid that is far more transparent in the DUV than novolac resins and is soluble... 

Heating a 3-(2-hydroxyphenyl)propionate ester in diphenyl ether with palladium-charcoal induces a combined cyclization and dehydrogenation [3437], Simultaneous de-O-benzylation and cyclization of a 2-(benzyloxy)acrylic acid by heating with acetyl chloride containing phenyltrimethylammonium iodide gives good yields of a fused pyran-2-one [3836]. In contrast, an o-methoxy-benzylidenemalonic acid (as its potassium salt) cyclizes in the cold when treated with trifluoroacetic acid-trifluoroacetic anhydride [3938]. 

Successful polymer supported stereoselective Diels-Alder reaction was performed using immobilized enantiopure 4-(3-hydroxy-4,4-dimethyl-2-oxopyrro-lidin-l-yl)benzoic acid 12 as a chiral auxiliary [15]. The corresponding resin-bound acrylate derivate has been applied as the dienophile 13. Preparation of the precursor started with the combination of pantolactone 10 and the sodium salt of 4-aminobenzoic acid. Conversion into the corresponding benzyl ester followed. The obtained racemate was esterified with (lS)-camphanic acid chloride to a dia-stereomeric mixture to gain the enantiopure compounds by chromatographic separation. After subsequent saponification of the camphanic acid moiety and hydrolysis of the benzyl ester the (R)-enantiomer 11 was coupled to Rink amide resin (Scheme 12.6). 

Modification of the products that resulted from the aza-annulation of tetrasubstituted enamine substrates with acrylate derivatives was very limited. The aza-annulation of benzyl ester 496 with the mixed anhydride, a mixture (497) preformed from EtC CCl and sodium acrylate, provided a route to 498 in >98 2 diastereoselectivity (eq. 100), which allowed access to the carboxylic acid derivative 499 through catalytic hydrogenation.1 Further elaboration of either the ester or the acid derivative was unsuccessful, possibly due to the steric congestion around the reactive functionality. Extended hydrogenation did not reduce the enamine functionality, as observed in related substrates, and 498 was relatively stable to acidic hydrolysis conditions. In addition, DCC (N,N -dicyclohexylcarbodiimide) coupling of acid 499 with either benzyl amine or glycine ethyl ester was unsuccessful. 

The Fukuyama synthesis commenced with the copper-catalyzed asymmetric reduction of butenolide 26 to give lactone 27 in 98% enantiomeric excess (Scheme 9). Sequential alkylation with CbzCl followed by methyl acrylate provided lactone 28 and installed both of the required contiguous stereocenters. The key Curtius rearrangement was performed by conversion of the benzyl ester to the acyl azide followed by heating. Subsequent treatment with aqueous HCI provided cyclized lactam 8. This compound was then dibromi-nated to lactam 29 using bromine, ZnCl2, and formic acid, which were the only conditions that were able to introduce the orf/to-bromine. The fully elaborated aromatic compound 29 was treated with methylamine followed by PDC to obtain cyclic A -methylimide 23. 

The reaction of methyl propargylate (propiolate) with benzylimidazole and its 2-alkyl and aryl derivatives in acetonitrile leads to the formation of the methyl esters of 3-fran -(l-benzimidazolyl)acrylic acid 106a and 107a, b, whereas the reaction with benzimidazole in methanol leads exclusively to the corresponding cis isomer 106b in the absence of the solvent, the treatment of benzimidazole with methyl propiolate gives a mixture of compounds 106a, b, and pyrrolo[l,2-a]ben-zimidazole 108 (Fig. 3.5). At the same time, the 2-isopropyl, 2-phenyl, and 2-benzyl derivatives of benzimidazole in reaction with methyl propiolate without a solvent form the pyrrolo[l,2-a]quinoxalines 114 and 115 (Scheme 3.35) (Acheson and Verlander 1973). 

Figure 11.11 Pyrogram of a paint sample collected from a decorative frame of the Universal Judgement by Bonamico Buffalmacco (fourteenth century, Monumental Cemetery of Pisa, Italy). Pyrolysis was performed with a microfurnace pyrolyser, at 600°C, in the presence of HMDS. 1, Benzene 2, ethyl acrylate 3, methyl methacrylate 4, acetic acid, trimethyl silyl ester 5, pyrrole 6, toluene 7, 2 methylpyrrole 8, 3 methylpyrrole 9, crotonic acid 10, ben zaldehyde 11, phenol 12, 2 methylphenol 13, 4 methylphenol 14, 2,4 dimethyl phenol 15, benzyl nitrile 16, 3 phenylpropionitrile 17, indole 18, phthalate 19, phthalate 20, ben zyl benzoate HMDS pyrolysis products [27]...

Photolytic. Photolysis of permethrin in aqueous solutions containing various solvents (acetone, hexane, and methanol) under UV light (1 >290 nm) or on soil in natural sunlight initially resulted in the isomerization of the cyclopropane moiety and ester cleavage. Photolysis products identified were 3-phenoxybenzyldimethyl acrylate, 3-phenoxybenzaldehyde, 3-phenoxybenzoic acid, mono-chlorovinyl acids, cis- and fra/is-dichlorovinyl acids, benzoic acid, 3-hydroxybenzoic acid, 3-hydroxybenzyl alcohol, benzyl alcohol, benzaldehyde, 3-hydroxybenzaldehyde, and 3-hydroxybenzoic acid (Holmstead et ah, 1978). 

Aminothiazole, with acetaldehyde, 42 to 2-mercaptothiazoie, 370 4-Aminothiazole-2,5-diphenyl, to 2,5 di-phenyl-A-2-thiazoline-4-one, 421 Ammothiazoie-A -oxide, 118 2-Aminothiazoles. 12 acidity of, 90 and acrylophenone, 42 acylations of, with acetic acid. 53 with acetic anhydride, 52 with acyl halides, 48 with chloracetyl chloride, 49 with-y-chlorobutyrylchloride, 50 with 0-chloropropionylchloride, 50 with esters, 53 with ethy acrylate, 54 with indoiyl derivatives, 48 with malonic esters, 55 with malonyl chloride, 49 with oxalyl chloride, 50 with sodium acetate, 52 with unsaturated acyl chloride, 49 additions to double bonds, 40 with aldehydes, 98 alkylations, with alcohols, 38 with benzyhydryl chloride, 34 with benzyl chloride, 80 with chloracetic acid, 33 with chloracetic esters, 33 with 2-chloropropionic acid, 32 with dialkylaminoalkyl halides, 33 with dimethylaminoethylchloride, 35 with ethylene oxide, 34, 38... 

---