Acrolein structure

Acifluorfen, synthesis of, 683 Acrolein, structure of, 697 Acrylic acid, pKa of, 756 structure of. 753 Activating group (aromatic substitution), 561 acidity and, 760 explanation of, 564-565 Activation energy, 158 magnitude of, 159 reaction rate and, 158-159 Active site (enzyme), 162-163 citrate synthase and, 1046 hexokinase and, 163... 

Acrolein (H2C=CHCH=0) reacts with sodium azide (NaNj) in aqueous acetic acid to form a compound C3H5N3O in 71% yield Propanal (CH3CH2CH=0) when subjected to the same reaction conditions is recovered unchanged Suggest a structure for the product formed from acrolein and offer an explanation for the difference in reactivity between acrolein and propanal... 

H NMR spectra 13 were recorded for 3-(A, A -dimethylamino)acrolein at the temperatures given. What can be said about the structure of the compound and what thermodynamic data can be derived from these spectra ... 

Solufien Here are the structures of the ground state (left) and first excited state of acrolein ... 

Unlike formaldehyde, acrolein retains its planar structure in the first excited state. Moving to the first excited state principally affects the C-C-H bond angle, decreasing it almost 5°, and the C-C-C bond angle, increasing it about the same amount. The C-O bond also stretches slightly. 

Nitrones are a rather polarized 1,3-dipoles so that the transition structure of their cydoaddition reactions to alkenes activated by an electron-withdrawing substituent would involve some asynchronous nature with respect to the newly forming bonds, especially so in the Lewis acid-catalyzed reactions. Therefore, the transition structures for the catalyzed nitrone cydoaddition reactions were estimated on the basis of ab-initio calculations using the 3-21G basis set. A model reaction indudes the interaction between CH2=NH(0) and acrolein in the presence or absence of BH3 as an acid catalyst (Scheme 7.30). Both the catalyzed and uncatalyzed reactions have only one transition state in each case, indicating that the reactions are both concerted. However, the synchronous nature between the newly forming 01-C5 and C3-C4 bonds in the transition structure TS-J of the catalyzed reaction is rather different from that in the uncatalyzed reaction TS-K. For example, the bond lengths and bond orders in the uncatalyzed reaction are 1.93 A and 0.37 for the 01-C5 bond and 2.47 A and 0.19 for the C3-C4 bond, while those in... 

The carbo-Diels-Alder reaction of acrolein with butadiene (Scheme 8.1) has been the standard reaction studied by theoretical calculations in order to investigate the influence of Lewis acids on the reaction course and several papers deal with this reaction. As an extension of an ab-initio study of the carbo-Diels-Alder reaction of butadiene with acrolein [5], Houk et al. investigated the transition-state structures and the origins of selectivity of Lewis acid-catalyzed carbo-Diels-Alder reactions [6]. Four different transition-state structures were considered (Fig. 8.4). Acrolein can add either endo (N) or exo (X), in either s-cis (C) or s-trans (T), and the Lewis acid coordinates to the carbonyl in the molecular plane, either syn or anti to the alkene. 

Fig. 8.4 The four different transition-state structures considered for the Diels-Alder reaction of acrolein with a diene in the presence of a Lewis acid (BH3). The diene can add...

Both experimental [7] and theoretical [8] investigations have shown that the anti complexes of acrolein and boranes are the most stable and the transition states were located only for these four anti complexes. The most stable transition-state structure was calculated (RHF/3-21G) to be NC, while XT is the least stable of the four located. The activation energy has been calculated to be 21.6 kcal mol for the catalyzed reaction, which is substantially above the experimental value of 10.4 1.9 kcal mol for the AlCl3-catalyzed addition of methyl acrylate to butadiene [4a]. The transition-state structure NC is shown in Fig. 8.5. 

The mechanism of the carbo-Diels-Alder reaction has been a subject of controversy with respect to synchronicity or asynchronicity. With acrolein as the dieno-phile complexed to a Lewis acid, one would not expect a synchronous reaction. The C1-C6 and C4—C5 bond lengths in the NC-transition-state structure for the BF3-catalyzed reaction of acrolein with butadiene are calculated to be 2.96 A and 1.932 A, respectively [6]. The asynchronicity of the BF3-catalyzed carbo-Diels-Alder reaction is also apparent from the pyramidalization of the reacting centers C4 and C5 of NC (the short C-C bond) is pyramidalized by 11°, while Cl and C6 (the long C-C bond) are nearly planar. The lowest energy transition-state structure (NC) has the most pronounced asynchronicity, while the highest energy transition-state structure (XT) is more synchronous. 

Fig. 8.5 The calculated transition-state structure for the reaction of acrolein with butadiene leading to carbo-Diels-Alder adduct catalyzed by BH3 using a RHF/3-21G basis set [6]...

An important contribution for the endo selectivity in the carho-Diels-Alder reaction is the second-order orbital interaction [1], However, no bonds are formed in the product for this interaction. For the BF3-catalyzed reaction of acrolein with butadiene the overlap population between Cl and C6 is only 0.018 in the NC-transi-tion state [6], which is substantially smaller than the interaction between C3 and O (0.031). It is also notable that the C3-0 bond distance, 2.588 A, is significant shorter than the C1-C6 bond length (2.96 A), of which the latter is the one formed experimentally. The NC-transition-state structure can also lead to formation of vinyldihydropyran, i.e. a hetero-Diels-Alder reaction has proceeded. The potential energy surface at the NC-transition-state structure is extremely flat and structure NCA (Fig. 8.6) lies on the surface-separating reactants from product [6]. 

In an investigation by Yamabe et al. [9] of the fine tuning of the [4-1-2] and [2-1-4] cycloaddition reaction of acrolein with butadiene catalyzed by BF3 and AICI3 using a larger basis set and more sophisticated calculations, the different reaction paths were also studied. The activation energy for the uncatalyzed reaction were calculated to be 17.52 and 16.80 kcal mol for the exo and endo transition states, respectively, and is close to the experimental values for s-trans-acrolein. For the BF3-catalyzed reaction the transition-state energies were calculated to be 10.87 and 6.09 kcal mol , for the exo- and endo-reaction paths, respectively [9]. The calculated transition-state structures for this reaction are very asynchronous and similar to those obtained by Houk et al. The endo-reaction path for the BF3-catalyzed reaction indicates that an inverse electron-demand C3-0 bond formation (2.635 A... 

Trialky I boranes react rapidly with methyl vinyl ketone (and other a,j8-unsaturated ketones) to yield, after hydrolysis, methyl ketones of the indicated structure 4). The reaction with acrolein is analogous to give jS-alkylpropionaldehydes (5). The process is inefficient in that only one of the three alkyl groups of the borane is converted into product, but the rapidity and ease of carrying out the reaction may be adequate... 

In total, many possibilities of propagation result for the ions formed by the attack on the C = 0 double bond. According to the calculations, 4 of the structures which can be formed theoretically by interaction of an acrolein chain end with an acrolein monomer possess energetic preference. Two of them are the structures c and d. These results agree with the experimental cationic polymerizability ofacroleine(R = —CHO), as well as with the fact that in the cationically polymerized polyacroleine the following structures alternate with each other88) ... 

The partial oxidation of propylene occurs via a similar mechanism, although the surface structure of the bismuth-molybdenum oxide is much more complicated than in Fig. 9.17. As Fig. 9.18 shows, crystallographically different oxygen atoms play different roles. Bridging O atoms between Bi and Mo are believed to be responsible for C-H activation and H abstraction from the methyl group, after which the propylene adsorbs in the form of an allyl group (H2C=CH-CH2). This is most likely the rate-determining step of the mechanism. Terminal O atoms bound to Mo are considered to be those that insert in the hydrocarbon. Sites located on bismuth activate and dissociate the O2 which fills the vacancies left in the coordination of molybdenum after acrolein desorption. 

However, it should be noted that the structure of those bimetallic particles (Ag-In) can be changed under the conditions of the catalytic reaction, that is, in presence of the reactants, as recently shown by in situ X-ray absorption spectroscopy of acrolein hydrogenation [100]. 

Similar cyclisations have also been invoked recently 159 160>. Support for our suggested mechanism is apparent from the structures of the products obtained with various methyl derivatives of acrolein. Similarly, p-deuteriocinnamaldehyde leads to 2-[2H]5.6,7,8-tetrachloroflavene 157>. 

---