Acetic acid dilute hydrolysis

Monobasic aluminum acetate is dispensed as a 7% aqueous solution for the topical treatment of certain dermatological conditions, where a combination of detergent, antiseptic, astringent, and heat-dispersant effects are needed (12). The solution, diluted with 20—40 parts water, is appHed topically to the skin and mucous membranes as a wet dressing (13). Burrow s solution, prepared from aluminum subacetate solution by the addition of a specific amount of acetic acid, is also used as a topical wet dressing. Standards of purity and concentration have been estabHshed for both pharmaceutical aluminum acetate solutions (13). Each 100 mL of aluminum subacetate solution yields 2.30—2.60 g of aluminum oxide and 5.43—6.13 g of acetic acid upon hydrolysis. For the Burow s solution, each 100 mL yields 1.20—1.45 g of aluminum oxide and 4.25—5.12 g of acetic acid. Both solutions may be stabilized to hydrolysis by the addition of boric acid in amounts not to exceed 0.9% and 0.6% for the subacetate and Burow s solutions, respectively (13). 

Acetals are usually liquid they are almost unaffected by alkalis and are not attacked by metallic sodium nor by Fehling s solution. They are identified by reference to the alcohol and aldehyde (or ketone if a ketal) which they yield when hydrolysed in acid solution. Hydrolysis proceeds readily in dilute acid solution e.g., with 3-5 per cent, acid). ... 

Bromination of quinaldine (I) (Section V,2) with bromine in glacial acetic acid in the presence of anhydrous sodium acetate aflFords dilute sulphuric acid gives quinaltiinic acid (III). 

Processes for Triacetate. There are both batch and continuous process for triacetate. Many of the considerations and support faciUties for producing acetate apply to triacetate however, no acetyl hydrolysis is required. In the batch triacetate sulfuric acid process, however, a sulfate hydrolysis step (or desulfonation) is necessary. This is carried out by slow addition of a dilute aqueous acetic acid solution containing sodium or magnesium acetate (44,45) or triethanolamine (46) to neutrali2e the Hberated sulfuric acid. The cellulose triacetate product has a combined acetic acid content of 61.5%. 

Precipitation and Purification. During the hydrolysis, control tests are made by turbidimetric titration of samples taken intermittently. When the desired degree of hydrolysis is reached, the ester is precipitated from the reaction solution into water. It is important for the precipitate to have the proper texture for subsequent washing to remove acid and salts for thermal stabilization. Before precipitation, the reaction solution is usually diluted with additional aqueous acetic acid to reduce the viscosity. If a flake texture is desired, the solution is poured into a vigorously stirred, 10—15% aqueous acetic acid. To precipitate the acetate in powder form, dilute acetic acid is added to the stirred reaction solution. In both cases, the precipitated ester is suspended in 25—30% aqueous acid solutions and finally washed with deionized water. The dilution, precipitation temperature, agitation, and strength of the acid media must be controlled to ensure uniform texture. 

Many carbamates have been used as protective groups. They are arranged in this chapter in order of increasing complexity of stmcture. The most useful compounds do not necessarily have the simplest stmctures, but are /-butyl (BOC), readily cleaved by acidic hydrolysis benzyl (Cbz or Z), cleaved by catalytic hy-drogenolysis 2,4-dichlorobenzyl, stable to the acid-catalyzed hydrolysis of benzyl and /-butyl carbamates 2-(biphenylyl)isopropyl, cleaved more easily than /-butyl carbamate by dilute acetic acid 9-fluorenylmethyl, cleaved by /3-elimination with base isonicotinyl, cleaved by reduction with zinc in acetic acid 1-adamantyl, readily cleaved by trifluoroacetic acid and ally], readily cleaved by Pd-catalyzed isomerisation. 

The most common method of purification of inorganic species is by recrystallisation, usually from water. However, especially with salts of weak acids or of cations other than the alkaline and alkaline earth metals, care must be taken to minimise the effect of hydrolysis. This can be achieved, for example, by recrystallising acetates in the presence of dilute acetic acid. Nevertheless, there are many inorganic chemicals that are too insoluble or are hydrolysed by water so that no general purification method can be given. It is convenient that many inorganic substances have large temperature coefficients for their solubility in water, but in other cases recrystallisation is still possible by partial solvent evaporation. 

Aconitine contains four methoxyl groups and three hydroxyl groups (triacetyl derivative, m.p. 207-8°). On hydrolysis by water under pressure, or by boiling with dilute acid, it loses 1 mol. of acetic acid and forms benzoylaconine, whilst hydrolysis by alkalis eliminates both acetic and benzoic acids and yields aconine. 

Hydrolysis of the ketal group with hot acetic acid or dilute aqueous methanolic sulfuric acid affords the 5a-hydroxy-6 -methyI-3-ketone (8). 

The tetrasubstituted isomer of the morpholine enamine of 2-methyl-cyclohexanone (20) because cf the diminished electronic overlap should be expected to exhibit lower degree of enamine-type reactivity toward electrophilic agents than the trisubstituted isomer. This was demonstrated to be the case when the treatment of the enamine with dilute acetic acid at room temperature resulted in the completely selective hydrolysis of the trisubstituted isomer within 5 min. The tetrasubstituted isomer was rather slow to react and was 96% hydrolyzed after 22 hr (77). The slowness might also be due to the intermediacy of quaternary iminium ion 23, which suffers from a severe. 4< strain 7,7a) between the equatorial C-2 methyl group and the methylene group adjacent to the nitrogen atom, 23 being formed by the stereoelectronically controlled axial protonation of 20. 

This value is in excellent agreement with the calculated free energy value by the consideration of various nonbonded interactions in the epimers (69 and 70) [(2 X 1,3-diaxial Me—H interaction) — (1 x 1,3-diaxial Me—H interaction + 1 X l,2- < Me—H interaction) = (0.9 x 2) — (0.9 + 0.6) = 0.3 kcal/mole]. Hydrolysis of the enamine with dilute acetic acid gave a 3 2 mixture of cis and trans isomers of the ketone, thus confirming the assignments made to the enamine components. 

---