Accumulatory pressure measurements of evolved gas

The kinetics of many decompositions are conveniently studied from measurements of the pressure of the gas evolved in a previously evacuated and sealed constant volume system. It is usually assumed, and occasionally confirmed, that gas release is directly proportional to a, so that the method is most suitable for reactants which yield a single volatile product by the irreversible breakdown of a substance that does not sublime on heating in vacuum. A cold trap is normally maintained between the heated reactant and the gauge to condense non-volatile products (e.g. water vapour) and impurities. The method has found wide application, notably in studies of the decomposition of azides, permanganates, etc., and has been successfully developed as an undergraduate experiment [114—116]. 

Accumulatory pressure measurements have been used to study the kinetics of more complicated reactions. In the low temperature decomposition of ammonium perchlorate, the rate measurements depend on the constancy of composition of the non-condensable components of the product mixture [120], The kinetics of the high temperature decomposition [ 59] of this compound have been studied by accumulatory pressure measurements in the presence of an inert gas to suppress sublimation of the solid reactant. Reversible dissociations are not, however, appropriately studied in a closed system, where product readsorption and diffusion effects within the product layer may control, or exert perceptible influence on, the rate of gas release [121]. 

The development and ready availability of reliable and accurate electronic microbalances [33,122—128] have led to their wide application in kinetic studies of the decomposition of solids. Certain of the disad- 

Mass loss determinations refer to the total change resulting from reactant decomposition and usually include contributions from a mixture of product compounds, some of which would normally be condensed under conditions used for accumulatory pressure measurements. Such information concerned with the overall process is, however, often usefully supplemented by evolved gas analyses (EGA) using appropriate analytical methods. Sestak [130] has made a detailed investigation of the effects of size and shape of reactant container on decomposition kinetics and has recommended that the sample be spread as a thin layer on the surfaces of a multiple plate holder. The catalytic activity of platinum as a reactant support may modify [131] the apparent kinetic behaviour. 

For isothermal measurements, it is advisable to use a furnace of low thermal capacity unless suitable arrangements can be made to transport the sample into a preheated zone. The Curie point method [132] of temperature calibration is ideally suited for microbalance studies with a small furnace. A unijunction transistor relaxation oscillator, with a thermistor as the resistive part with completion of the circuit through the balance suspension, has been suggested for temperature measurements within the limited range 298—433 K [133]. 

---