Absorption-based sensors, detection

Modified fiber-optic-based sensors can be used for sensing pollutants, explosives, drugs, pharmaceuticals, and miscellaneous organics (Yeh et al. 2006). Optical fibers coated with porous silica can be used to detect the presence of chlorinated hydrocarbons. Alternatively, these compounds can also be detected using fiber-optic-coupled surface plasmon resonance methods. Aromatic compounds were detected by evanescent wave absorption spectroscopy. Suitably modified fiber-optic array tips can be used to detect presence of explosive materials (Wolfbeis 2000). 

Another major research theme related to silicon is the development of MEMS-based analytical instruments for gas sensing, such as ntiniaturized silicon photoacoustic and thermal conductivity gas sensors, MEMS Fourier transform and other spectrometers, and integrated nondispersive IR absorption (NDIR) sensors. Unfortunately, there are several problans to be overcome here. According to Bogue (2007), part of the difficulty lies with the fact that nuniaturization is not always particularly beneficial miniaturized NDIR optical sensors suffer from low sensitivity due to the necessarily short optical path lengths silicon photoacoustic sensors cannot offer the low limits of detection that characterize their conventional counterparts, and as yet, MEMS spectrometers only offer low resolution. 

In context with methane detection during offshore oil drilling, another infrared fiber optic methane sensor was reported25. The detector comprises 3 main units a microcomputer-based signal processing and control unit, a nonconducting fiber optic gas sensor, and an optical fiber cable module. The system operates at an absorption line of methane where silica fibers have very low losses. 

Optical sensors rely on optical detection of a chemical species. Two basic operation principles are known for optically sensing chemical species intrinsic optical property of the analyte is utilized for its detection indicator lor label) based sensing is used when the analyte has no intrinsic optical property. For example, pH is measured optically by immobilizing a pH indicator on a solid support and observing changes in the absorption or fluorescence of the indicator as the pH of the sample varies with time1 20. 

Sensitivity impacts upon the limit of detection and resolution of the device, making it a key performance parameter. Recently, several strategies have been developed in order to provide sensitivity enhancements for optical sensor platforms based on both optical absorption and fluorescence phenomena. These strategies are the result of rigorous theoretical analyses of the relevant systems and, combined with polymer processing technology and planar fabrication protocols, provide a viable route for the development of low-cost, efficient optical sensor platforms. 

---