With calcium, reduction aromatic compounds

Various other observations of Krapcho and Bothner-By are accommodated by the radical-anion reduction mechanism. Thus, the position of the initial equilibrium [Eq. (3g)] would be expected to be determined by the reduction potential of the metal and the oxidation potential of the aromatic compound. In spite of small differences in their reduction potentials, lithium, sodium, potassium and calcium afford sufficiently high concentrations of the radical-anion so that all four metals can effect Birch reductions. The few compounds for which comparative data are available are reduced in nearly identical yields by the four metals. However, lithium ion can coordinate strongly with the radical-anion, unlike sodium and potassium ions, and consequently equilibrium (3g) for lithium is shifted considerably... 

When tert-butyl alcohol is used with the calcium-amine system, aromatic compounds can be reduced to products identical with those obtained by Birch reduction of the same substrates [37]. Advantages of the calcium-amine-alcohol procedure are, first, that calcium is much safer to handle than sodium and lithium and is therefore more amenable to large-scale reductions, and, second, the amine solvents are relatively high-boiling and are, therefore, much easier to manipulate than liquid ammonia. 

Metallic sodium. This metal is employed for the drying of ethers and of saturated and aromatic hydrocarbons. The bulk of the water should first be removed from the liquid or solution by a preliminary drying with anhydrous calcium chloride or magnesium sulphate. Sodium is most effective in the form of fine wire, which is forced directly into the liquid by means of a sodium press (see under Ether, Section II,47,i) a large surface is thus presented to the liquid. It cannot be used for any compound with which it reacts or which is affected by alkalis or is easily subject to reduction (due to the hydrogen evolved during the dehydration), viz., alcohols, acids, esters, organic halides, ketones, aldehydes, and some amines. 

One of die most popular reactions in organic chemistry is dissolving metal reductions [1-3], Two systems are frequently used - sodium dissolved in ammonia with alcohol and lithium dissolved in alkylamines [4]. Although calcium is seldom used, it has been successfully applied to the reduction of a variety of compounds and functional groups [5], including aromatic hydrocarbons, carbon-carbon double and triple bonds, benzyl ethers, allyl ethers, epoxides, esters, aliphatic nitriles, dithianes, als well as thiophenyl and sulfonyl groups. 

Reduction of aromatic and olefinic compounds with lithium or calcium and low molecular weight amines to monounsaturated olefins, as well as the fully reduced products. The extent of reduction and selectivity can be controlled by varying the reaction conditions ... 

---