Vortex apparatus

Vortex apparatus (Vortex-Genie2, model GT60, Scientific industries, Inc, NY). 

Sazhin, B. S. Akulich, A. V. Mathematical modeling of the gas in the separation zone of the once-through vortex apparatus based on the model of turbulence. Theor. Found. Chem. Eng., 2001,35(5), 472 78. 

Development of the Construction Bubble-Vortex Apparatus with... 

DEVELOPMENT OF THE CONSTRUCTION BUBBLE-VORTEX APPARATUS WITH ADJUSTABLE BLADES... 

To optimize the bubble-vortex apparatus conducted experimental studies. The experiments were performed by a single method [1] of comparative tests on dust collectors bubble-vortex apparatus with a cylindrical chamber 0.6 m and a diameter of 0.2 and 0.4 m bubble-vortex machine with adjustable blades in accordance with Fig. 1 comprises a cylindrical chamber 1 inlet pipe 2. The cylindrical chamber 1 is three swirl gas flow, which is a four blades, curved sinusoidal curve. Adjusting the blades 2 is done by turning the eccentrics, sealed with a cylindrical chamber 1 through the spring washers and lock nuts. [2]... 

Studies were conducted on a bubble-vortex apparatus with a cylindrical chamber with a diameter of 0.2 and 0.4 m as a model system were studied... 

Investigated the resistance bubble-vortex apparatus, depending on its classification regime-design parameters. 

Working out of designs a vortex apparatus will allow to raise the efficiency of a dust separation at considerable decrease in water resistance of the device, and also to save material means and the squares of production... 

Known builds of direct-flow-vortex apparatuses are offered for classifying on set of characteristic signs (Nikolaev, 1970) ... 

The resulting formulas were the basis for the development of methods for calculating bubble—vortex apparatus. The developed method allows to calculate the optimum geometry devices working optimally. Optimization criterion is the minimum cost of cleaning unit volume gas along with the required efficiency of dust collection. 

---